Feit Electric PAR38 LED Flood Light Bulb Instruction Manual

Introduction

This instruction manual provides important information regarding the installation, operation, and maintenance of your Feit Electric PAR38 LED Flood Light Bulb. Please read this manual thoroughly before installation and retain it for future reference.

Safety Information

• WARNING: Risk of electric shock. Do not open.
• Ensure power is turned off at the circuit breaker before installation, inspection, or removal.
• Do not use with dimmers. This bulb is non-dimmable.
• Suitable for damp locations and outdoor use.
• Do not use in totally enclosed fixtures as this may shorten bulb life.
• Do not look directly at the operating LED bulb.
• This device is not intended for use with emergency exits.

Product Features

The Feit Electric PAR38 LED Flood Light Bulb offers high illumination and energy efficiency. Key features include:

• PAR38 Reflector Design: Directs light for focused illumination.
• High Lumen Output: 5000 lumens for bright lighting.
• Daylight Color Temperature: 5000K for a vibrant, white light.
• Energy Efficient: Uses only 55 watts, equivalent to a 325-watt incandescent bulb.
• Long Lifespan: Rated for up to 15,000 hours (approximately 13 years).
• Damp Rated: Suitable for wet environments, both indoors and outdoors.
• Non-Dimmable: Designed for on/off operation only.

Figure 1: Feit Electric PAR38 LED Flood Light Bulb. This image shows the bulb's design, including its reflector shape and E26 base.

Setup and Installation

1. Turn Off Power: Before beginning installation, ensure the power to the fixture is turned off at the circuit breaker or fuse box.
2. Remove Old Bulb: Carefully unscrew the existing bulb from the fixture. Allow it to cool if it was recently in use.
3. Install New Bulb: Screw the Feit Electric PAR38 LED Flood Light Bulb into the E26 base socket. Ensure it is securely tightened, but do not overtighten.
4. Restore Power: Turn the power back on at the circuit breaker.
5. Test: Turn on the light switch to verify the bulb is functioning correctly.

Figure 2: Example of Feit Electric PAR38 LED Flood Light Bulbs installed in an outdoor setting, providing bright illumination.

Operating Instructions

This Feit Electric PAR38 LED Flood Light Bulb operates like a standard light bulb. Simply use the wall switch or fixture switch to turn the light on or off. As this bulb is non-dimmable, it should not be connected to dimmer switches. Using it with a dimmer may cause damage to the bulb or the dimmer itself.

Maintenance

• Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Replacement: Due to its long lifespan, frequent replacement is not expected. When replacement is necessary, follow the installation steps outlined above.

Troubleshooting

If your Feit Electric PAR38 LED Flood Light Bulb is not functioning as expected, consider the following:

• Bulb Not Lighting:
  • Check that the power switch is in the "ON" position.
  • Verify that the circuit breaker is not tripped.
  • Ensure the bulb is screwed in securely into the socket.
  • Test the fixture with a known working bulb to rule out a fixture issue.
• Flickering:
  • Confirm the bulb is not connected to a dimmer switch, as this bulb is non-dimmable.
  • Ensure the bulb is securely tightened in the socket.

Specifications

Warranty Information

This Feit Electric PAR38 LED Flood Light Bulb comes with a 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Feit Electric customer support.

Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact Feit Electric customer support:

• Website: Visit the official Feit Electric website for FAQs and support resources.
• Phone: Refer to the product packaging or the Feit Electric website for current contact numbers.
• Online Store: Feit Electric Amazon Store