1. Introduction
Thank you for choosing the NIXON Dork Too digital watch. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new timepiece. Please read this manual thoroughly before using the watch to ensure optimal performance and longevity.
2. Product Overview
The NIXON Dork Too features a custom injection-molded stainless steel case with a stainless steel perforated speaker cover. It includes a digital module displaying time, date, and alarm functions, along with an EL backlight for visibility in low light conditions. The watch is equipped with a stainless steel link bracelet and a fold-over clasp with double push-button safety. A unique feature allows the time to be announced audibly by pressing a dedicated button. The device is powered by a rechargeable battery via USB.
Figure 2.1: Front view of the NIXON Dork Too digital watch, showcasing the rectangular face and speaker cover.
Figure 2.2: Side view of the NIXON Dork Too, illustrating the case depth and button placement.
3. Setup
3.1 Charging the Battery
The NIXON Dork Too is equipped with a rechargeable battery. Before initial use, or when the battery is low, connect the provided charging cord to the watch and a compatible USB power source. A protective case is included for safe storage during charging.
- Locate the charging port on the watch.
- Connect the small end of the charging cord to the watch.
- Connect the USB end of the charging cord to a USB power adapter or computer port.
- The watch display will indicate charging status.
- Once fully charged, disconnect the charging cord.
Figure 3.1: The NIXON Dork Too connected to its USB charging cable.
3.2 Setting Time and Date
Refer to the specific button functions to enter the setting mode for time and date. Typically, a dedicated button (often labeled "MODE" or similar) is used to cycle through settings, and other buttons (e.g., "SET", "ADJUST") are used to change values.
- Press and hold the MODE button until the time display begins to flash.
- Press the SET button to advance the flashing digit (hours, minutes, year, month, day).
- Use the ADJUST button to change the value of the flashing digit.
- Repeat steps 2 and 3 until all desired settings are configured.
- Press the MODE button again to exit the setting mode.
4. Operating Instructions
4.1 Displaying Time and Date
The digital module continuously displays the current time. Pressing the MODE button may cycle through different display modes, such as time, date, or alarm.
4.2 Time Announcement Feature
To hear the current time announced audibly, press the button located at the front of the watch case. The time will be spoken through the integrated speaker.
4.3 Using the EL Backlight
For improved visibility in low-light conditions, press the LIGHT button (or equivalent, typically on the side of the watch) to activate the EL backlight. The backlight will illuminate the display for a few seconds before automatically turning off.
4.4 Setting and Using the Alarm
To set the alarm:
- Press the MODE button repeatedly until the alarm setting screen is displayed.
- Use the SET and ADJUST buttons to set the desired alarm time.
- Press MODE to confirm and exit.
To activate/deactivate the alarm, typically a short press of a specific button (e.g., ALARM ON/OFF) while in the alarm display mode will toggle its status. When the alarm sounds, press any button to silence it.
5. Maintenance
5.1 Cleaning Your Watch
To maintain the appearance of your NIXON Dork Too, regularly clean the stainless steel case and band. Use a soft, damp cloth to wipe away dirt and smudges. Avoid using harsh chemicals or abrasive materials, as these can damage the finish.
- Wipe the watch with a soft, lint-free cloth.
- For stubborn dirt, slightly dampen the cloth with water.
- Ensure no moisture enters the speaker or button openings.
- Dry thoroughly with a clean, dry cloth.
5.2 Battery Care
To prolong battery life, avoid fully discharging the watch frequently. Charge the watch regularly and store it in a cool, dry place when not in use for extended periods.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch not turning on/display blank | Low or depleted battery | Charge the watch using the provided USB cable. |
| Time announcement not working | Button not pressed correctly; low battery | Ensure the front button is pressed firmly. Check battery level and charge if necessary. |
| Display is dim or flickering | Low battery; environmental factors | Charge the watch. Ensure the watch is not exposed to extreme temperatures. |
| Buttons unresponsive | Temporary software glitch; moisture ingress | Try restarting the watch (if applicable, by holding a combination of buttons). Ensure the watch is dry. |
If you encounter issues not listed here, or if the suggested solutions do not resolve the problem, please contact NIXON customer support.
7. Specifications
- Model Name: Dork Too
- Case Material: Stainless Steel
- Band Material: Stainless Steel
- Case Diameter: 34 Millimeters
- Case Height: 44.7 mm
- Case Width: 34.3 mm
- Case Depth: 13 mm
- Band Width: 20.9 mm
- Clasp Type: Fold-over clasp with double push-button safety (Push Button Deployment Clasp)
- Watch Movement Type: Japanese Quartz
- Power Source: Battery Powered (Rechargeable via USB)
- Embellishment Feature: Crystal (Edge to edge crystal window)
- Shape: Rectangular
- Age Range Description: Adult
- Manufacturer: NIXON
8. Warranty and Support
For information regarding warranty coverage, product registration, or technical support, please visit the official NIXON website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty claims.
NIXON Official Website: www.nixon.com
Contact information for support can typically be found on the official website under a "Support" or "Contact Us" section.
