Crivit Professional Diving and Snorkel Kit for Children Instruction Manual

Introduction

This manual provides essential instructions for the safe and effective use, setup, and maintenance of your Crivit Professional Diving and Snorkel Kit for Children. Please read all instructions carefully before use and retain this manual for future reference. This kit is designed for recreational snorkeling and diving activities for children.

Product Components

Your Crivit Professional Diving and Snorkel Kit includes the following items:

• Diving Mask: Features a silicone body, tempered glass lens, and an adjustable buckle strap for a secure and comfortable fit.
• Snorkel with Integrated Whistle: Equipped with a patented "Dry Top" system to prevent water entry, a soft silicone mouthpiece, and a purge valve. Includes a height-adjustable snorkel holder and an integrated signal whistle.
• Jet-Fin Fins (2 pieces): Designed with a quick-release system, efficient water-directing openings, and adjustable straps with comfortable TPR padding.

Image: Complete Crivit Diving and Snorkel Kit, including mask, snorkel, and a pair of fins.

Safety Information

• Adult Supervision: This product is intended for children and must always be used under direct and competent adult supervision.
• Health Check: Ensure the user is in good health and comfortable in water before using the kit. Consult a doctor if there are any concerns.
• Water Conditions: Only use the kit in calm, clear water conditions. Avoid strong currents, waves, or areas with boat traffic.
• Proper Fit: Ensure all components (mask, snorkel, fins) fit correctly and are securely fastened to prevent water leakage or loss during use.
• Breathing: Practice breathing through the snorkel in shallow water before venturing into deeper areas. Never hold your breath for extended periods while snorkeling.
• Signal Whistle: The integrated whistle is for emergency signaling only. Instruct children on its proper use.
• Avoid Diving Deep: This kit is for surface snorkeling and shallow diving. Do not attempt deep dives.
• Material Safety: The mask body and face end are made of high-quality, hypoallergenic liquid silicone. Discontinue use if any skin irritation occurs.

Setup Instructions

1. Mask Adjustment

1. Positioning: Place the mask gently on the face without the strap, ensuring the silicone skirt seals comfortably around the eyes and nose. Inhale slightly through your nose; the mask should suction to your face.
2. Strap Adjustment: Pull the strap over the back of the head. Adjust the strap length using the quick-adjust buckles on both sides until the mask feels snug but not overly tight. The strap should rest above the ears.
3. Check Seal: Ensure no hair is caught under the silicone skirt, as this can cause leaks. The mask should create a comfortable, watertight seal.

Image: Close-up of the Crivit Diving Mask, highlighting the adjustable strap and silicone skirt.

2. Snorkel Attachment

1. Attach to Mask: Use the height-adjustable snorkel holder to attach the snorkel to the mask strap. Position the snorkel on the left side of the mask strap.
2. Adjust Height: Adjust the snorkel's height so that the mouthpiece can be comfortably held in the mouth without pulling on the mask or feeling strained. The top of the snorkel should extend above the water surface when in use.
3. Mouthpiece Placement: Place the soft silicone mouthpiece into the mouth, biting gently on the tabs to secure it. Ensure a tight seal with the lips around the mouthpiece.

Image: The Crivit Snorkel, featuring the "Dry Top" mechanism and integrated signal whistle.

3. Fin Adjustment

1. Donning Fins: Slide your foot into the foot pocket of each fin.
2. Strap Adjustment: Use the quick-release system to adjust the heel strap. Pull the strap until the fin feels secure on your foot, but not so tight that it causes discomfort or restricts circulation. The comfortable TPR padding should prevent chafing.
3. Check Fit: The fins should fit snugly to prevent them from slipping off in the water, but allow for comfortable movement.

Image: A pair of Crivit Jet-Fin Fins, showcasing their design.

Image: Detail of the adjustable heel strap and quick-release buckle on the Crivit Jet-Fin.

Operating Instructions

Using the Mask

• Clearing Water: If water enters the mask, press the top of the mask firmly against your forehead and exhale slowly through your nose. The air pressure will force the water out through the bottom seal.
• Equalization: When descending even slightly, pressure can build up in the mask. Gently exhale through your nose into the mask to equalize the pressure. The Easy Equalization Skirt (EES) assists in this process.
• Field of Vision: The mask's optimized design provides an extra-wide field of vision for enhanced underwater viewing.

Using the Snorkel

• Breathing: Breathe slowly and deeply through your mouth when using the snorkel.
• Dry Top System: The patented "Dry Top" system is designed to prevent splash water from entering the snorkel tube when on the surface and automatically seals the snorkel when submerged, minimizing water intake.
• Purge Valve: If water does enter the snorkel, exhale sharply through the mouthpiece. The purge valve at the bottom will allow water to escape easily.
• Signal Whistle: In an emergency or to attract attention, blow firmly into the integrated whistle located on the snorkel.

Using the Fins

• Propulsion: Use a gentle, continuous kicking motion from the hips, keeping legs relatively straight. Avoid bending knees excessively.
• Efficiency: The Jet-Fin openings are designed to efficiently direct water backward, providing effective propulsion with less effort.
• Entry/Exit: When entering or exiting the water, walk backward or shuffle to avoid tripping on the fins.

Maintenance

Cleaning

• Rinse Thoroughly: After each use, rinse all components (mask, snorkel, fins) thoroughly with fresh, clean water. This removes salt, chlorine, and sand, which can degrade materials over time.
• Avoid Harsh Chemicals: Do not use harsh detergents, solvents, or abrasive cleaners, as these can damage the silicone, tempered glass, or plastic components.
• Mask Lens: For the mask lens, a mild anti-fog solution can be applied before use, but always rinse thoroughly afterward.

Storage

• Dry Completely: Ensure all components are completely dry before storing to prevent mold or mildew growth.
• Cool, Dry Place: Store the kit in a cool, dry place away from direct sunlight and extreme temperatures. Prolonged exposure to sunlight can cause silicone and plastic to degrade and discolor.
• Protect Mask Lens: Store the mask with the lens protected to prevent scratches. Avoid placing heavy objects on top of the kit.

Troubleshooting

Specifications

Warranty and Support

For warranty information or product support, please refer to the packaging or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.