VViViD Air-Tint Headlight/Tail Light Window Tint User Manual

Product Overview

The VViViD Air-Tint is a specialized vinyl film designed for tinting vehicle headlights and taillights. This product features an air-release membrane, allowing for dry installation without the need for liquid solutions. It is engineered to conform to complex shapes, making it suitable for a wide range of automotive lighting designs.

Made from automotive-grade cast vinyl, the tint is 80% tinted smoke (20% VLT) and utilizes an acrylic-based adhesive that is safe for headlight coatings and plastics. It offers a durable and chemical-safe solution for customizing vehicle lights.

Image: A roll of VViViD Air-Tint film in Dark Black.

Image: A black car showcasing VViViD Air-Tint applied to its taillights, demonstrating the finished look.

Installation Instructions

Proper preparation and application are key to achieving a smooth, bubble-free finish. Always measure your headlights or taillights to ensure you have enough vinyl for the application.

Preparation

1. Clean: Thoroughly clean the surface of the headlight or taillight to remove all dirt, dust, wax, and other contaminants. Use an isopropyl alcohol solution or a dedicated vinyl cleaner for best results.
2. Measure: Measure the area of the light to be wrapped. Cut the vinyl to shape, leaving extra material around the edges for easier handling, positioning, and trimming.

Application Steps

1. Peel & Stick: Carefully peel the backing from the vinyl. The VViViD Air-Tint features an air-release membrane, allowing for dry application. Position the tint onto the light surface.
2. Apply & Heat: Apply the film to the target surface. Use a squeegee to smooth out the film, working from the center outwards to remove any trapped air or wrinkles. For curved or complex areas, gently heat the film with a heat gun or hairdryer to make it more pliable and conform to the shape. Avoid overheating.
3. Trim & Detail: Once the film is applied smoothly, use a sharp blade or knife to carefully trim any excess vinyl around the edges of the light. Ensure a clean cut for a professional finish.

Image: Illustration of the air-release technology within the VViViD Air-Tint film, which aids in bubble-free dry application.

Image: A close-up view of VViViD Air-Tint applied to a vehicle headlight, highlighting its smooth finish.

Installation Videos

Usage and Care

General Use

Once installed, the VViViD Air-Tint provides a customized appearance for your vehicle's lights. The film is designed for long-term adhesion and durability under normal driving conditions.

Visibility Considerations

The Dark Black tint is 80% tinted smoke, meaning it allows 20% Visible Light Transmission (VLT). While this provides a dark aesthetic, it is important to consider potential reductions in light output and visibility, especially during nighttime driving or in low-light conditions. Always ensure your vehicle's lighting remains compliant with local regulations after tint application.

Maintenance

To maintain the appearance and longevity of your VViViD Air-Tint, follow these guidelines:

• Cleaning: Clean tinted lights with mild soap and water. Avoid abrasive cleaners, brushes, or high-pressure washes that could damage the film.
• Avoid Harsh Chemicals: Do not use petroleum-based solvents or strong chemical cleaners, as these can degrade the vinyl and adhesive.
• Inspection: Periodically inspect the edges of the tint for any signs of lifting or peeling. Address minor lifting promptly to prevent further detachment.

Troubleshooting

Common Issues and Solutions

• Creasing on Sharp Curves:

  The film can crease on very sharp or complex curves if not applied carefully. Use a heat gun to make the film more pliable and stretch it gently over curves. Work slowly and use a squeegee to smooth out the film as you go. Reheating and repositioning may be necessary.

• Edges Peeling Back:

  If edges begin to peel, it may indicate insufficient adhesion during initial application or improper surface preparation. Ensure the surface is thoroughly clean and dry before application. After trimming, firmly press down all edges, especially after heating, to ensure a strong bond. For existing peeling, carefully re-clean the lifted area, apply gentle heat, and press firmly to re-adhere.
• Adhesive Residue:

  If tape used to secure the roll leaves residue, use an adhesive remover specifically designed for automotive surfaces or isopropyl alcohol to gently clean the area without damaging the tint or the light surface.

Product Specifications

Warranty Information

Manufacturer warranty details for the VViViD Air-Tint are not explicitly provided in the product information. For specific warranty terms and conditions, please contact VViViD directly through their official support channels.

Support

For additional support, product inquiries, or to explore other VViViD products, please visit the official VViViD store:

Visit the VViViD Store on Amazon