SupplySource AC/DC Adapter User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your SupplySource AC/DC Adapter. This adapter is designed as a replacement power supply for various Infinuvo CleanMate robotic vacuum cleaner models.

Compatible Models:

• Infinuvo CleanMate 365
• Infinuvo CleanMate QQ1, QQ2, QQ-1, QQ-2, QQ-2L Series
• Infinuvo CleanMate QQ-2LT, QQ2-LT, QQ2-LTII, QQ2-LT II
• Infinuvo CleanMate QQ2 Plus, QQ2 PlusII, QQ2 Plus II

Important Notice: Before connecting, ensure the DC output and tip size of this AC adapter are compatible with your device's requirements.

2. Safety Information

Your SupplySource AC/DC Adapter is manufactured with high-quality materials and incorporates multiple safety features to protect against potential hazards. These include:

• Incorrect Voltage (IV) Protection: Safeguards against improper voltage input.
• Short Circuit (SC) Protection: Prevents damage from short circuits.
• Internal Overheating (IO) Protection: Automatically cuts off power to prevent overheating.
• Overload Cut-off: Protects against excessive current draw.
• Over Voltage Cut-off: Protects against voltage spikes.
• Automatic Thermal Cut-off: Additional thermal protection.

The charger is certified with CE and FCC standards, ensuring compliance with safety regulations.

General Safety Guidelines:

• Always operate the adapter in a well-ventilated area to prevent overheating, especially during prolonged use.
• Do not place the adapter on skin products or other materials that may impede ventilation or retain heat.
• Avoid exposing the adapter to moisture, rain, or extreme temperatures.
• Do not disassemble or attempt to repair the adapter yourself. Refer to qualified service personnel.
• Keep out of reach of children.

3. Setup Instructions

1. Verify Compatibility: Before connecting, confirm that the adapter's DC output voltage and connector tip size match the requirements of your Infinuvo CleanMate robotic vacuum cleaner.
2. Connect to Device: Insert the DC output connector of the adapter firmly into the charging port of your Infinuvo CleanMate device.
3. Connect to Power Outlet: Plug the AC input cord of the adapter into a standard 100-240V wall power outlet.
4. Power On: Once connected, your device should begin charging or receive power.

4. Operating Instructions

The SupplySource AC/DC Adapter operates automatically once connected correctly. It provides a stable power supply to your Infinuvo CleanMate robotic vacuum cleaner for charging its battery or for direct operation, depending on the device's design.

Input Voltage: The adapter is designed to accept a wide range of input voltages from 100-240V AC, making it suitable for use in various regions.

Ensure the adapter is always used in a location with adequate ventilation to maintain optimal operating temperature.

5. Maintenance

• Cleaning: Disconnect the adapter from both the power outlet and your device before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures.
• Ventilation: Always ensure the adapter has sufficient airflow around it during operation to prevent heat buildup.
• Cable Care: Avoid bending or crimping the power cord excessively. Inspect the cord periodically for any signs of damage.

6. Troubleshooting

If you encounter issues with your AC/DC adapter, please refer to the following common troubleshooting steps:

• No Power to Device:
  • Ensure the adapter is securely plugged into a working wall outlet.
  • Verify the DC connector is fully inserted into your Infinuvo CleanMate device.
  • Check if the wall outlet is functional by plugging in another device.
  • Confirm that the adapter's specifications (voltage, current, tip size) are correct for your device.
• Adapter Overheating:
  • Ensure the adapter is in a well-ventilated area and not covered by any materials.
  • Disconnect the adapter and allow it to cool down. If overheating persists, discontinue use and contact support.
• Visible Damage: If the adapter or its cables show any signs of physical damage, discontinue use immediately to prevent electrical hazards.

7. Product Features and Specifications

Image: Overview of the SupplySource AC/DC Adapter, highlighting its internal safety features, high-quality power cord, and durable casing.

Key Features:

• Advanced Safety Protections: Includes stable output voltage, automatic overload cut-off, over voltage cut-off, automatic thermal cut-off, and short circuit protection.
• Durable Power Cord: Made of high-quality 3x0.5 mm copper core, providing antioxidant and corrosion-resistant properties.
• Robust Casing: The power supply's shell is constructed from flame-retardant and high-temperature resistant ABS and PC synthetic materials, ensuring strength and wear resistance.

Technical Specifications:

8. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.