Introduction
This manual provides essential instructions for the assembly, operation, and maintenance of your Modway Render 46 Inch Mid-Century Modern Low Profile Media Console TV Stand. Designed with a durable engineered wood frame and a walnut grain laminate, this media console offers both aesthetic appeal and practical functionality for your living space. It features four tapered wood legs, adjustable shelving, three cable management holes, and two sliding doors for convenient storage access. This unit is suitable for flat-screen televisions up to 50 inches wide.
Figure 1: Front view of the Modway Render 46 Inch Media Console TV Stand.
Setup and Assembly
Assembly of the Modway Render Media Console is required. Please ensure all components are present before beginning. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.
Required Tools (Not Included):
- Phillips head screwdriver
- Hammer (optional, for dowels)
Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging and verify against the included parts list. Separate hardware into individual groups.
- Attach Legs: Secure the four tapered wood legs to the base of the console using the provided hardware. Ensure they are firmly tightened for stability.
- Construct Frame: Assemble the main body of the console, connecting the side panels, top, and bottom pieces. Follow the numerical sequence in the detailed assembly instructions provided in the product packaging.
- Install Shelves: Insert the adjustable shelves into the designated slots within the console's compartments. Adjust their height as needed for your media devices.
- Mount Sliding Doors: Carefully place the two slatted sliding doors onto their respective tracks. Test their movement to ensure smooth operation.
- Final Inspection: Once assembled, gently move the console to its desired location. Ensure all connections are secure and the unit is stable before placing any items on it.
Figure 2: Product dimensions for planning your space.
Operating Instructions
Sliding Doors:
The Modway Render Media Console features two slatted sliding doors. These doors move horizontally along a track, allowing you to conceal or reveal the storage compartments as desired. To open or close, gently slide the door along its track. Avoid forcing the doors if they encounter resistance.
Figure 3: Media console with one sliding door open, revealing internal storage.
Adjustable Shelves:
The console includes two adjustable shelves, one on each side. These shelves can be repositioned to accommodate various media devices, books, or decorative items. To adjust, carefully remove the shelf, reposition the shelf pins to the desired height, and then reinsert the shelf.
Cable Management:
Three cable management holes are integrated into the back panel of the console. Utilize these openings to route power cords and audio/video cables, helping to maintain a tidy and organized appearance for your entertainment setup.
Figure 4: Key features of the media console, including cable management holes (visible on the back panel).
Care and Maintenance
Proper care will extend the life and appearance of your Modway Render Media Console.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the walnut laminate finish.
- Spills: Blot spills immediately with a clean, dry cloth.
- Heat and Moisture: Avoid placing hot items directly on the surface. Use coasters or protective pads. Keep the unit away from excessive moisture or direct sunlight to prevent warping or fading.
- Moving: When moving the console, always lift it rather than dragging it to prevent damage to the legs and frame.
- Hardware: Periodically check and tighten all hardware connections to ensure stability.
Troubleshooting
If you encounter any issues with your media console, refer to the following common solutions:
- Wobbly Unit: Ensure all assembly screws and bolts are securely tightened. Check that the console is placed on a level surface.
- Sliding Doors Sticking: Inspect the door tracks for any debris or obstructions. Clean the tracks with a soft cloth. Ensure the doors are properly seated in their grooves.
- Scratches or Dents: For minor surface imperfections, touch-up pens or furniture markers matching the walnut finish may be used.
Specifications
| Feature | Detail |
|---|---|
| Model Number | EEI-3837-WAL |
| Brand | Modway |
| Material | Engineered Wood with Walnut Grain Laminate |
| Color | Walnut |
| Product Dimensions (L x W x H) | 46.5 x 13.5 x 17 inches |
| Item Weight | 38 pounds |
| Number of Shelves | 2 (Adjustable) |
| Special Features | Adjustable Shelf, 3 Cable Management Holes, 2 Sliding Doors |
| Accommodates TVs Up To | 50 inches |
Warranty Information
The Modway Render Media Console is covered by a one-year warranty against manufacturer defects from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper assembly, misuse, abuse, accidents, modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Customer Support
For further assistance, missing parts, or warranty inquiries, please contact Modway customer service. Have your model number (EEI-3837-WAL) and proof of purchase ready when contacting support.
- Website: Visit the official Modway website for support resources.
- Contact Information: Refer to the contact details provided in your product packaging or on the Modway website.
