HIFIMAN Ananda-BT User Manual

Introduction

Welcome to the user manual for your HIFIMAN Ananda-BT High-Resolution Bluetooth Over-Ear Planar Magnetic Headphones. These headphones are engineered to deliver an exceptional audio experience, combining audiophile-grade sound with the convenience of wireless technology. This manual provides essential information on setup, operation, maintenance, and troubleshooting to help you get the most out of your Ananda-BT headphones.

Key Features

• High-Resolution Audio: Supports up to 24bit/192kHz via USB-C and 24bit/96kHz via Bluetooth, ensuring pristine sound quality.
• Advanced Codec Support: Compatible with APTX-HD, HWA, and LDAC lossless HD Bluetooth codecs for superior wireless streaming.
• NEO "supernano" Diaphragm (NsD): Features an 80% thinner diaphragm than previous designs, providing fast response, detailed imaging, and full-range sonics.
• Integrated Amplification: Custom-designed internal amplifier perfectly matched for HD Bluetooth codecs.
• R2R2000 Filter and Analog Circuit: Incorporates advanced filter and analog circuit design for exceptional audio fidelity.
• Plug & Play Microphone: Includes a convenient microphone for gaming, podcasting, and vlogging.
• Versatile Connectivity: Seamless Bluetooth connection to computers, tablets, and smartphones, or wired connection via USB-Type C for uncompromised sound quality.

Design & Comfort

The Ananda-BT headphones are designed for extended listening comfort and optimal acoustic performance.

• Hybrid Headband Design: Engineered for comfortable long-term wear.
• Window Shade Grill Design: Significantly reduces sonic reflections, contributing to crystal-clear sound.
• Asymmetrical Ear Cups: Shaped to conform to the human ear for a natural and comfortable fit.

Figure 1: HIFIMAN Ananda-BT headphones showcasing their ergonomic design.

Figure 2: Detail of the hybrid headband design for enhanced comfort.

Figure 3: View of the asymmetrical earcups and window shade grill.

Setup

1. Charging the Headphones

Before first use, fully charge your Ananda-BT headphones. Connect the supplied USB-C cable to the USB-C port on the headphone and to a compatible USB power source. The charging process requires the headphones to be powered down. After plugging in, press and hold the power button for approximately two seconds to initiate charging. The LED indicator will show charging status.

Figure 4: Connecting the USB-C cable for charging.

2. Bluetooth Pairing

1. Ensure the headphones are powered off.
2. Press and hold the power button until the LED indicator flashes blue and red, indicating pairing mode.
3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
4. Select "HIFIMAN Ananda-BT" from the list.
5. Once connected, the LED indicator will turn solid blue.

3. Wired Connection (USB-C)

For the highest sound quality, connect your Ananda-BT headphones directly to a computer using the supplied USB-C cable. This connection supports up to 24bit/192kHz audio. The headphones will function as an external sound card.

Figure 5: Ananda-BT connected to a laptop via USB-C.

4. Microphone Attachment

The Ananda-BT comes with a plug-and-play microphone. Insert the microphone's 3.5mm jack into the dedicated microphone port on the headphone (refer to Figure 6). Ensure it is securely seated.

Figure 6: Attaching the plug-and-play microphone.

Figure 7: Overview of the headphone ports.

Operating Instructions

Power On/Off

• To Power On: Press and hold the power button until the LED indicator lights up.
• To Power Off: Press and hold the power button until the LED indicator turns off.

Audio Playback

Once connected via Bluetooth or USB-C, your headphones will automatically play audio from your device. Control playback (play/pause, skip tracks) directly from your source device. Note that the Ananda-BT headphones do not feature on-board volume controls; volume must be adjusted via the connected device.

Using the Microphone

When the microphone is attached and the headphones are connected to a device that supports microphone input (e.g., computer, smartphone), the microphone will be active for calls, voice chat, or recording. Ensure your device's audio settings are configured to use the Ananda-BT as the input and output device.

Maintenance

To ensure the longevity and optimal performance of your HIFIMAN Ananda-BT headphones, follow these maintenance guidelines:

• Cleaning: Use a soft, dry, lint-free cloth to clean the headphones. Do not use harsh chemicals, cleaning solvents, or strong detergents.
• Storage: When not in use, store the headphones in the provided travel case to protect them from dust, scratches, and impacts.
• Avoid Moisture: Keep the headphones away from water, humidity, and extreme temperatures.
• Cable Care: Handle the USB-C cable and microphone cable gently. Avoid sharp bends or excessive pulling.
• Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Charge regularly, even if not used for extended periods.

Figure 8: Store your Ananda-BT headphones in the included travel case.

Troubleshooting

If you encounter issues with your Ananda-BT headphones, refer to the following common problems and solutions:

• No Sound:
  • Ensure headphones are powered on and charged.
  • Verify Bluetooth connection or USB-C cable connection.
  • Check volume levels on your source device.
  • For wired connection, ensure the USB-C cable is fully inserted and recognized by your computer.
• Bluetooth Disconnection/Interference:
  • Ensure headphones are within the 10-meter wireless range of your device.
  • Minimize obstacles between headphones and device.
  • Try re-pairing the headphones with your device.
• Microphone Not Working:
  • Ensure the microphone is securely attached to the headphone port.
  • Check your device's audio input settings to confirm the Ananda-BT microphone is selected.
  • Note: Some users have reported compatibility issues with headset mode on Windows devices, leading to disconnections. If experiencing this, ensure your Windows audio settings are correctly configured for the headphones.
• Charging Issues:
  • Ensure the headphones are powered off before attempting to charge.
  • Remember to press and hold the power button for two seconds after plugging in the USB-C cable to activate charging.
  • Try a different USB-C cable or power adapter.

Specifications

Official Product Video

Warranty & Support

HIFIMAN products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official HIFIMAN website. Keep your proof of purchase for warranty claims.