Arteck 2.4G Nano USB Receiver Instruction Manual

Introduction

This manual provides comprehensive instructions for setting up and using your Arteck 2.4G Nano USB Receiver. This receiver is designed to establish a wireless connection between compatible Arteck 2.4G wireless keyboards and mice and your computer.

Image: Front view of the Arteck 2.4G Nano USB Receiver.

Compatibility

The Arteck 2.4G Nano USB Receiver is specifically designed for use with Arteck 2.4G wireless keyboards and mice. It is not compatible with products from other brands.

Important Compatibility Exclusions: This receiver is not suitable for the following Arteck models or types:

• Arteck GW28-3
• Arteck HD323
• Arteck K730
• Arteck HW197
• Arteck HD197
• Arteck MD167
• Arteck MD172
• Any Arteck Bluetooth keyboard or mouse

Ensure your Arteck device is a 2.4G wireless model compatible with this specific receiver (AUSB1).

Setup and Pairing Instructions

The USB receiver does not automatically pair with your keyboard or mouse. Manual pairing is required for initial setup or if the connection is lost.

Image: Visual guide for the pairing process of Arteck keyboards and mice with the USB receiver.

For Arteck Keyboard Pairing:

1. Unplug the USB Receiver: Ensure the USB receiver is not currently plugged into your computer's USB port.
2. Activate Pairing Mode on Keyboard: Switch the keyboard to the "ON" position. Simultaneously press and hold the Esc key and the K key. The indicator light on the keyboard will begin blinking, indicating it is in pairing mode.
3. Insert USB Receiver: While the keyboard indicator is blinking, move the keyboard close to a USB port on your computer (within 5 cm is recommended). Insert the USB receiver into the USB port.
4. Confirm Connection: The keyboard's indicator light should blink three times and then turn off, signifying a successful connection. If the connection fails, unplug and re-insert the USB receiver a few times while the keyboard indicator is blinking.

For Arteck Mouse Pairing:

1. Unplug the USB Receiver: Ensure the USB receiver is not currently plugged into your computer's USB port.
2. Prepare Mouse for Pairing: Switch the mouse to the "OFF" position. Press and hold both the right-click button and the scroll wheel simultaneously.
3. Activate Pairing Mode on Mouse: While still holding the right-click button and scroll wheel, switch the mouse to the "ON" position. After approximately 2 seconds, release the buttons. The indicator light on the mouse will begin blinking, indicating it is in pairing mode.
4. Insert USB Receiver: While the mouse indicator is blinking, move the mouse close to a USB port on your computer. Quickly insert the USB receiver into the USB port.
5. Confirm Connection: The mouse's indicator light should blink three times and then turn off, signifying a successful connection.

Note: It is recommended to pair the keyboard first, then unplug the receiver, and then pair the mouse.

Operating Instructions

Once successfully paired, the Arteck 2.4G Nano USB Receiver operates automatically. Simply plug the receiver into an available USB port on your computer, and your paired Arteck wireless keyboard and mouse should function without further setup.

For optimal performance, ensure the receiver is not obstructed and is within a reasonable range of your wireless devices.

Troubleshooting

• Device Not Responding: If your keyboard or mouse is not responding, try re-pairing the device using the instructions in the "Setup and Pairing Instructions" section.
• Intermittent Connection: Ensure the USB receiver is plugged directly into a USB port on your computer, not a USB hub or extender, which can sometimes cause interference. Also, check for any large metal objects or other wireless devices that might be causing interference.
• Incorrect Device Paired: Verify that you are using the correct Arteck 2.4G Nano USB Receiver (Model AUSB1) for your specific Arteck wireless keyboard or mouse. Refer to the "Compatibility" section for exclusions.
• Still Having Issues? If you encounter persistent problems connecting your Arteck keyboard or mouse, please contact Arteck customer support for assistance. They can provide further guidance on manual pairing or other troubleshooting steps.

Specifications

Image: Side view of the Arteck 2.4G Nano USB Receiver, showing its compact size.

Support

For further assistance, technical support, or if you have any questions regarding your Arteck 2.4G Nano USB Receiver, please contact Arteck customer support. Refer to the contact information provided with your product packaging or visit the official Arteck website for support details.

Note: There is no explicit warranty information provided in the product details. Please refer to your purchase documentation or contact Arteck support for warranty specifics.