1. Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your CaDA I.BOT Code Robot (Model C83001W). The I.BOT is a remote-controlled robot construction set consisting of 434 pieces, designed to stimulate imagination and develop hand-eye coordination. Once assembled, the robot can be controlled via an included remote control or a dedicated mobile application, featuring movable limbs and LED-illuminated eyes.
Figure 1.1: CaDA I.BOT Code Robot and its packaging. This image shows the assembled robot alongside its product box, highlighting its design and the "Dual Mode Control" feature.
2. Important Safety Information
- Age Recommendation: This product is suitable for children aged 6 years and up. Adult supervision is recommended during assembly and initial operation.
- Small Parts Warning: The set contains small parts which may pose a choking hazard for children under 3 years of age. Keep all components out of reach of infants and toddlers.
- Battery Safety:
- Requires 2 x AA batteries (not included).
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Insert batteries with correct polarity (+ and -).
- Remove exhausted batteries promptly.
- Do not short-circuit battery terminals.
- Electrical Components: Handle the robot's electrical components with care. Do not expose to water or extreme temperatures.
- Moving Parts: Keep fingers, hair, and loose clothing away from moving parts (e.g., tracks, limbs) during operation to prevent entanglement or injury.
3. Package Contents
Before beginning assembly, please verify that all components are present. The CaDA I.BOT Code Robot set includes:
- 434 x Building Block Pieces
- 1 x Remote Control Unit
- 1 x Instruction Manual (this document)
- Electronic components (motors, LED eyes, control board) integrated within specific blocks.
Note: Batteries (2 x AA) are not included and must be purchased separately.
4. Setup and Assembly
Follow the step-by-step instructions provided in the included pictorial guide to assemble your I.BOT robot. Assembly typically takes several hours depending on experience.
4.1 Assembly Instructions
- Unpack Components: Carefully open the packaging and sort the building blocks by type or color to facilitate assembly.
- Follow Pictorial Guide: Refer to the separate, detailed assembly booklet. Each step illustrates the required pieces and their placement. Pay close attention to the orientation of specialized parts and electronic components.
- Connect Electronic Parts: Ensure all wires for motors and LED eyes are securely connected to the main control unit as indicated in the assembly guide. Incorrect connections may prevent the robot from functioning.
- Verify Connections: Before completing the final steps, double-check all connections and ensure no wires are pinched.
4.2 Battery Installation
The I.BOT robot requires 2 x AA batteries for operation. The battery compartment is typically located on the main body of the robot or the remote control unit.
- Locate the battery compartment on the robot (refer to the assembly guide for exact location).
- Using a small screwdriver (if required), open the battery compartment cover.
- Insert 2 x AA batteries, ensuring correct polarity (+/-) as marked inside the compartment.
- Replace the battery compartment cover and secure it.
- Repeat the process for the remote control unit if it also requires batteries (usually 2 x AAA, but check the remote itself).
Figure 4.1: Front view of the assembled CaDA I.BOT Code Robot. This image displays the robot's front, showing its LED eyes, track system, and movable arms.
5. Operating the I.BOT Robot
The I.BOT robot offers dual control modes: via the included remote control or a dedicated mobile application.
5.1 Remote Control Operation
- Power On: Ensure batteries are installed in both the robot and the remote control. Turn on the robot using the power switch (usually located near the battery compartment). Turn on the remote control.
- Pairing: The robot and remote control should automatically pair. If not, refer to the remote control's specific instructions for pairing mode.
- Movement: Use the joysticks or directional buttons on the remote control to move the robot forward, backward, left, and right.
- Limb Control: Dedicated buttons on the remote control will operate the robot's movable limbs and other functions, such as activating the LED eyes.
5.2 Mobile App Control
- Download App: Search for the "CaDA I.BOT" or "CaDA Robot" app on your device's app store (iOS App Store or Google Play Store).
- Install and Open: Install the app and open it.
- Bluetooth Connection: Ensure Bluetooth is enabled on your mobile device. Turn on the I.BOT robot. Within the app, select the option to connect to a new device. Select "I.BOT C83001W" from the list of available devices.
- Control Interface: Once connected, the app will display a control interface. This typically includes virtual joysticks for movement, buttons for limb control, and options for programming simple sequences.
- Programming (if applicable): The app may offer basic coding or sequence programming features. Refer to the app's in-app help or tutorials for detailed instructions on these advanced functions.
Figure 5.1: Rear view of the assembled CaDA I.BOT Code Robot. This image shows the robot from behind, detailing its track mechanism and the back of its head unit.
6. Maintenance
6.1 Cleaning
- Wipe the robot and remote control with a soft, dry cloth.
- Do not use harsh chemicals, abrasive cleaners, or water directly on the electronic components.
- Periodically check the tracks for any debris or hair that might impede movement.
6.2 Storage
- When not in use for extended periods, remove batteries from both the robot and the remote control to prevent leakage.
- Store the robot in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep the robot and its components in their original packaging or a suitable storage container to prevent loss of parts.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not turn on. |
|
|
| Robot does not respond to remote control. |
|
|
| Robot moves slowly or erratically. |
|
|
| LED eyes do not light up. |
|
|
8. Specifications
| Model Number | C83001W |
| Brand | CaDA |
| Number of Pieces | 434 |
| Recommended Age | 6 years and up |
| Material Type | Plastic |
| Batteries Required | Yes (2 x AA for robot, check remote for its battery type) |
| Batteries Included | No |
| Control Type | Remote Control, Mobile App |
| Product Dimensions (assembled) | Approximately 21.6 x 15.2 cm |
| Educational Objective(s) | Concentration, Construction, Fantasy development |
9. Warranty and Support
CaDA products are manufactured to high quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase for any potential warranty claims.
9.1 Customer Support
For technical assistance, missing parts, or any inquiries regarding your CaDA I.BOT Code Robot, please contact the manufacturer or your retailer's customer service. When contacting support, please have your product model number (C83001W) and purchase information ready.
You may find additional support resources, FAQs, and contact information on the official CaDA website (if available, search online for "CaDA official website").
