Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Laurey 10718 Ball Bearing Full Extension Side Mount Soft Closing Drawer Slides. Please read these instructions carefully before beginning installation to ensure proper function and longevity of the product. Keep this manual for future reference.
Product Overview
The Laurey 10718 drawer slides are designed for smooth, quiet operation and full access to your drawer contents. Featuring a ball bearing mechanism and soft-closing aero dampers, these slides provide a reliable and comfortable user experience.
Key Features:
- Full extension for complete drawer access.
- Ball bearing gliding motion for smooth operation.
- Soft closing aero dampers for quiet and gentle drawer closure.
- 100 lbs. rated weight capacity.
- Durable Zinc Plated finish.
- 18-inch (457mm) length.
Included Components:
- Two (2) Laurey 10718 Drawer Slides
- Attachment Screws
Image 1: A single Laurey 10718 Ball Bearing Full Extension Side Mount Soft Closing Drawer Slide, shown in its extended position. The slide is made of zinc-plated steel, featuring multiple mounting holes along its length and the ball bearing mechanism visible between the two main sections. This image illustrates the product's design and construction.
Setup and Installation
Proper installation is crucial for the optimal performance of your drawer slides. Ensure you have the necessary tools and follow these steps carefully.
Tools Required (Not Included):
- Measuring Tape
- Pencil
- Drill with appropriate drill bit (for pilot holes)
- Screwdriver (Phillips head recommended)
- Level
Installation Steps:
- Separate the Slides: Gently pull the inner slide member (the part that attaches to the drawer box) from the outer slide member (the part that attaches to the cabinet). There is usually a small lever or tab to release them.
- Mount Cabinet Members: Position the outer slide members inside the cabinet opening, ensuring they are level and parallel to each other. The front edge of the slide should be flush with the front edge of the cabinet frame (or set back as desired). Mark the screw hole locations with a pencil. Drill pilot holes if necessary, then secure the slides using the provided attachment screws.
- Mount Drawer Members: Attach the inner slide members to the sides of the drawer box. Ensure they are positioned correctly to align with the cabinet members. The front edge of the drawer member should be flush with the front of the drawer box. Mark and drill pilot holes, then secure with the provided screws.
- Insert Drawer: Align the drawer box (with inner slides attached) with the cabinet opening (with outer slides attached). Gently push the drawer into the cabinet until the slides engage. Push firmly until the soft-close mechanism fully retracts the drawer.
- Test Operation: Open and close the drawer several times to ensure smooth movement and proper soft-closing function. Adjust if necessary.
Operation
These Laurey drawer slides are designed for ease of use and durability.
Full Extension:
The full extension feature allows the drawer to open completely, providing full access to the entire contents of the drawer. This eliminates the need to reach into the back of the drawer.
Soft Closing:
The integrated soft-closing aero dampers ensure that the drawer closes gently and silently. When the drawer is pushed to within a few inches of being fully closed, the mechanism engages to slowly and quietly pull the drawer shut, preventing slamming.
Maintenance
Minimal maintenance is required to keep your Laurey drawer slides functioning optimally.
Cleaning:
- Wipe the slides periodically with a clean, damp cloth to remove dust and debris.
- Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish or the ball bearing mechanism.
Lubrication:
- Under normal use, the ball bearings are pre-lubricated and generally do not require additional lubrication.
- If you notice any stiffness or squeaking over time, a light application of a silicone-based lubricant (avoid oil-based lubricants which can attract dust) to the ball bearings may be applied.
Troubleshooting
If you encounter any issues with your drawer slides, refer to the following common problems and solutions:
Drawer is Sticking or Hard to Open/Close:
- Check for Obstructions: Ensure no items inside the drawer or cabinet are blocking the slide's path.
- Clean Slides: Dust or debris can accumulate on the slides. Clean them as described in the Maintenance section.
- Lubrication: Apply a small amount of silicone lubricant if cleaning does not resolve the issue.
- Alignment: Verify that the drawer and cabinet slides are properly aligned and parallel. Misalignment can cause friction.
Drawer Does Not Soft-Close Properly:
- Weight Load: Ensure the drawer is not overloaded beyond the 100 lbs. weight capacity, as excessive weight can hinder the soft-close mechanism.
- Full Engagement: Make sure the drawer is pushed with enough initial force for the soft-close mechanism to engage.
- Obstructions: Check for any physical obstructions preventing the final few inches of closure.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | 10718 |
| Brand | Laurey |
| Length | 18 Inches (457mm) |
| Weight Capacity | 100 Pounds |
| Mounting Type | Side Mount |
| Material | Alloy Steel |
| Finish | Zinc Plated |
| Product Dimensions | 45.72 x 2.03 x 3.56 cm (18 x 0.8 x 1.4 inches) |
| Item Weight | 454 g (1 lb) per slide |
| Included Components | Two slides + Attachment Screws |
| UPC | 722233107188 |
Warranty and Support
Warranty Information:
Laurey offers a Full Lifetime Warranty on these drawer slides, ensuring quality and performance. For specific details regarding the warranty coverage, please refer to the official Laurey website or contact customer support.
Customer Support:
If you have any questions, require assistance with installation, or need to address a warranty claim, please contact Laurey customer support through their official website or the retailer where the product was purchased.
