GODOX X2T-P

Download PDF
Contents

Godox X2T-P TTL Wireless Flash Trigger User Manual

Model: X2T-P | Brand: GODOX

1. Introduction

The Godox X2T-P TTL Wireless Flash Trigger is a versatile device designed to provide stable, reliable, and effective real-time signal transmission for photographers. It is compatible with Godox camera flashes, outdoor flashes, and studio flashes that feature the built-in Godox X wireless radio system. This manual provides detailed instructions for setting up, operating, and maintaining your X2T-P trigger.

Godox X2T-P TTL Wireless Flash Trigger

Figure 1.1: Godox X2T-P TTL Wireless Flash Trigger

The Godox X2T-P is a compact and robust wireless flash trigger, featuring a clear LCD display and intuitive controls for seamless integration with your camera and flash system.

2. Setup

2.1 Unpacking and Initial Inspection

Upon opening the package, ensure all components are present and undamaged. The box should contain:

  • 1 x Godox X2T-P Trigger
  • 1 x User Manual

2.2 Battery Installation

The X2T-P trigger requires 2 AA batteries for operation.

  1. Locate the battery compartment on the side of the trigger.
  2. Slide the battery cover open.
  3. Insert 2 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery cover securely.
Godox X2T-P Battery Compartment and Ports

Figure 2.1: Battery Compartment and Ports

This image shows the side view of the X2T-P trigger, highlighting the Type-C USB port, 3.5mm sync cord jack, and the AA battery compartment.

2.3 Mounting the Trigger

The X2T-P features a quick-lock hot-shoe for secure attachment to your camera.

  1. Slide the trigger onto your camera's hot-shoe mount.
  2. Engage the quick-lock mechanism by sliding the lock switch forward until it clicks into place.
Godox X2T-P Quick Lock Hot-shoe

Figure 2.2: Quick Lock Hot-shoe Mechanism

The image illustrates the quick-lock hot-shoe design, allowing for fast and secure attachment to a camera or other compatible device.

2.4 Initial Power On

To power on the trigger, locate the ON/OFF switch on the side and slide it to the 'ON' position. The LCD screen will illuminate.

3. Operating Instructions

3.1 Controls and Display

The X2T-P features a large LCD panel and dedicated buttons for easy operation.

Godox X2T-P User-friendly Design

Figure 3.1: User-friendly Design and Controls

This image highlights the separate group buttons (A, B, C, D, E), function buttons, and the relocated bottom dial wheel for convenient operation without obstructing the LCD panel.

  • LCD Panel: Displays flash mode, power output, channel, group, and other settings.
  • Group Buttons (A/B/C/D/E): Quickly select and manage individual flash groups.
  • Function Buttons: Used for quick settings and menu navigation.
  • Dial Wheel: Adjusts values and navigates through options. Positioned at the bottom-left for ergonomic use.

3.2 Flash Exposure Control

The X2T-P supports various flash exposure modes:

  • TTL Autoflash: Automatically sets flash output for correct exposure.
  • Manual Mode: Allows precise manual control over flash power.
  • Multiflash Mode: Fires a series of rapid flashes for multiple exposures in a single frame.
  • High-Speed Sync (HSS): Enables flash synchronization at shutter speeds up to 1/8000s.
  • Rear-Curtain Sync: Fires the flash just before the second curtain closes, creating motion blur behind the subject.
  • Flash Exposure Compensation (FEC): Adjusts flash output by ±3 stops in 1/3 stop increments.
  • Flash Exposure Lock (FEL): Locks the flash exposure value.

3.3 Wireless Flash Settings

The X2T-P operates on a 2.4GHz wireless system with a transmission range of approximately 0-100m.

  • Channels (32): Select a channel to avoid interference.
  • Wireless ID (01-99): Set a unique ID to prevent interference from other nearby systems.
  • Groups (5): Control up to 5 groups of flashes independently.
Godox X2T-P Scan, One-shot, Multi-shot, and ID Settings

Figure 3.2: Advanced Settings Display

This image shows the LCD display with options for channel scanning, one-shot/multi-shot settings, and wireless ID configuration.

3.4 Bluetooth Connectivity and App Control

The X2T-P features built-in Bluetooth for smartphone app control.

  1. Download the "GodoxPhoto" APP from your device's app store (available for iPhone/Android).
  2. Enable Bluetooth on your smartphone or tablet.
  3. Open the GodoxPhoto APP and connect to the X2T-P trigger.
  4. Through the app, you can control flash mode, power output, modeling light mode, beeper, and other settings of your Godox flashes.
Godox X2T-P Bluetooth Support

Figure 3.3: Bluetooth Connectivity with GodoxPhoto App

This diagram illustrates how the Godox X2T-P connects via Bluetooth to a smartphone running the GodoxPhoto app, enabling remote control of various Godox flashes.

3.5 Compatibility

The X2T-P is designed for Pentax camera models and Godox X wireless system flashes.

  • Compatible Pentax Camera Models: 645Z, K-3 II, K-1, KP, K-50, K-S2, K70.
  • Compatible Flash Models (No Extra Receiver Needed): Godox Built-in X system flashes such as AD600 series, AD400 series, AD200 series, V860II series, V850II, V350 series, V1 series, TT685 series, TT350 series, Quicker II series, QT II series, GS II series, SK II series, DP II series.

3.6 Triggering Modes

The X2T-P can function in various triggering scenarios:

Godox X2T-P triggering Godox flashes

Figure 3.4: Wireless Godox Flashes Trigger

The X2T-P can wirelessly trigger Godox flashes with built-in X system.

Godox X2T-P triggering Canon/Nikon/Sony Speedlites

Figure 3.5: Wireless Canon/Nikon/Sony Speedlites Trigger

The trigger can also be used to wirelessly control Canon, Nikon, or Sony Speedlites.

Godox X2T-P as Shutter Release Trigger

Figure 3.6: Wireless Shutter Release Trigger

The X2T-P can function as a wireless shutter release for compatible cameras.

Godox X2T-P triggering flash via 3.5mm Sync Cord Jack

Figure 3.7: Wireless Flash Trigger via 3.5mm Sync Cord Jack

For flashes without the Godox X system, the X2T-P can trigger them via the 3.5mm sync cord jack.

4. Maintenance

4.1 General Care

  • Keep the device dry. Do not expose it to rain or high humidity.
  • Do not handle with wet hands.
  • Avoid sudden temperature changes, which may cause condensation.
  • Keep away from strong magnetic fields.
  • Do not drop or subject the device to strong impacts.

4.2 Cleaning

Clean the device regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Do not use harsh chemicals or abrasive cleaners.

4.3 Firmware Upgrade

The X2T-P supports firmware upgrades via its Type-C USB port. Visit the official Godox website for the latest firmware and instructions.

5. Troubleshooting

If you encounter issues with your Godox X2T-P trigger, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Trigger does not power on.Batteries are dead or incorrectly inserted.Replace batteries or ensure correct polarity.
Flash does not fire.Incorrect channel/ID settings, out of range, or flash not powered on.Ensure trigger and flash are on the same channel and ID. Check flash power and battery. Reduce distance.
Interference from other devices.Overlapping wireless signals.Use the newly added scan setting function to automatically detect the channel with the least interference. Change channel or wireless ID.
Bluetooth connection issues.Bluetooth not enabled, app not installed, or device not paired.Ensure Bluetooth is on. Download "GodoxPhoto" app. Re-pair the device.
Inaccurate flash exposure.Incorrect FEC settings or metering issues.Adjust Flash Exposure Compensation. Check camera metering mode.

6. Specifications

FeatureDetail
ModelX2T-P
Flash Exposure ControlTTL Autoflash, Manual Mode, Multiflash Mode
High-Speed Sync (HSS)Yes, up to 1/8000s
Rear-Curtain SyncYes
Flash Exposure Compensation±3 stops in 1/3 stop increments
Flash Exposure LockYes
Focus AssistYes
Modeling Lamp ControlYes
BeeperYes
Transmission Range (Approx.)0-100m
Modulation ModeMSK
Channels32
Wireless ID01-99
Groups5
DisplayLarge LCD panel with backlight ON/OFF
Power Source2 AA batteries
Item Weight6.3 ounces (approx. 178g)
Package Dimensions4.33 x 4.17 x 2.83 inches
First AvailableJune 3, 2019

6.1 What's in the Box

  • 1 x X2T-P Trigger
  • 1 x User Manual

7. Warranty & Support

7.1 Warranty Information

Godox products typically come with a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Godox website for detailed warranty terms and conditions. Keep your purchase receipt as proof of purchase for warranty claims.

7.2 Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Godox customer support through their official website or the retailer from whom you purchased the product. Provide your product model (X2T-P) and serial number (if applicable) for faster service.

© 2024 GODOX. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.