Introduction
This manual provides instructions for the assembly, operation, and maintenance of your BRIO Double-Column Water Bottle Stand. This stand is designed to efficiently store 3- and 5-gallon water bottles, helping to organize your space.
Figure 1: Fully assembled BRIO Double-Column Water Bottle Stand with 10 water bottles.
Setup and Assembly
The BRIO Double-Column Water Bottle Stand is designed for easy assembly with minimal tools. Please follow these general steps:
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components are present according to the included parts list (not provided in this manual, refer to product packaging).
- Assemble Frame: Connect the vertical support beams to the horizontal crossbars. Ensure all connections are secure.
- Install Shelves/Racks: Attach the bottle support racks to the assembled frame. These are designed to cradle 3- and 5-gallon bottles.
- Attach Adjustable Feet: Screw in the adjustable rubber feet to the bottom of the stand's legs. These feet protect flooring and allow for leveling on uneven surfaces.
- Placement: Position the assembled stand on a flat, stable surface. Adjust the rubber feet as needed to ensure the stand is level and stable before loading bottles.
Note: Specific assembly instructions and diagrams are typically included with the product packaging. Refer to those for detailed, step-by-step guidance.
Operating Instructions
Using your BRIO Water Bottle Stand is straightforward:
- Loading Bottles: Gently place 3- or 5-gallon water bottles onto the designated racks. Ensure bottles are securely seated and balanced.
- Capacity: This 10-bottle model is designed to hold up to ten 3- or 5-gallon water bottles. Distribute the weight evenly across the stand.
- Safety: Always load bottles from the bottom up to maintain stability. Avoid placing bottles in a manner that could cause the stand to become top-heavy or unstable.
Maintenance
To ensure the longevity and appearance of your water bottle stand, follow these maintenance guidelines:
- Cleaning: The manufacturer recommends Hand Wash for product care. Use a soft cloth with mild soap and water to clean the metal frame. Avoid abrasive cleaners or scouring pads that could damage the finish.
- Drying: After cleaning, thoroughly dry all metal components to prevent rust or water spots.
- Regular Inspection: Periodically check all screws and connections to ensure they remain tight. Tighten any loose fasteners as needed.
- Foot Pads: Inspect the rubber feet for wear and tear. Replace if damaged to maintain floor protection and stability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly or unstable. | Uneven floor surface; loose connections; improper bottle placement. | Adjust the rubber feet to level the stand. Tighten all assembly screws. Ensure bottles are evenly distributed and properly seated. |
| Difficulty assembling. | Incorrect part orientation; missing tools. | Refer to the detailed assembly instructions provided with the product. Ensure parts are oriented correctly before tightening. |
| Bottles do not fit securely. | Incorrect bottle size; improper placement. | This stand is designed for standard 3- and 5-gallon water bottles. Ensure bottles are placed correctly on the curved supports. |
Specifications
- Brand: Brio
- Model Number: STM10BTGRY
- Color: 10-bottle (Grey)
- Style: Modern
- Finish Type: Vinyl
- Bottle Capacity: 10 (3- or 5-gallon bottles)
- Assembly Required: Yes
- Product Care Instructions: Hand Wash
- Item Weight: 19.31 pounds
- Package Dimensions: 55 x 15.5 x 4 inches
- UPC: 841545164907
Warranty and Support
Specific warranty information for the BRIO Double-Column Water Bottle Stand is not provided in this manual. Please refer to the product packaging or contact Brio customer service for details regarding warranty coverage and support options.
For additional assistance or inquiries, please visit the official Brio website or contact their customer support department.