Introduction
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your Steinel Spot ONE LED Outdoor Projector. Please read this manual thoroughly before beginning installation or use, and retain it for future reference.
The Steinel Spot ONE LED Outdoor Projector features a robust design with an adjustable head, providing targeted illumination for various outdoor areas. This model (058623) is a non-sensor version, offering continuous light output.
Image: Steinel Spot ONE LED Outdoor Projector in anthracite, designed for outdoor wall mounting.
Product Features
- Energy Efficient: Consumes only 6.7 W, providing 512 lumens of warm white light (3000 K).
- Adjustable Head: The robust projector head can be rotated 180° horizontally and 90° vertically for precise light direction.
- Durable Construction: Features a high-quality aluminum housing for extended lifespan.
- Easy Installation: Designed for straightforward assembly and mounting.
- Versatile Application: Ideal for illuminating entrances, courtyards, gardens, carports, and terraces.
- Interchangeable Bulb: Uses a standard GU10 LED bulb (included).
Image: The projector head offers 180° horizontal swivel and 90° vertical tilt for flexible light positioning.
Setup and Installation
1. Safety Instructions
- Installation must be performed by a qualified electrician in accordance with national wiring regulations and local electrical codes.
- Ensure the main power supply is switched off before commencing any installation or maintenance work.
- Do not install the product on a damp or conductive surface.
- The product is rated IP44, providing protection against splashing water. Ensure proper sealing during installation to maintain this rating.
2. Components Included
Verify that all components are present before starting installation:
- Steinel Spot ONE LED Outdoor Projector
- GU10 LED Bulb (512 lm)
- Mounting Material: 3x Screws, 3x Wall Plugs (dowels), 3x Spacers
- Instruction Manual
Image: Packaging contents showing the Spot ONE projector, GU10 LED bulb, mounting screws, wall plugs, spacers, and user manual.
3. Mounting Steps
- Prepare the Mounting Surface: Choose a suitable wall location for the projector. Mark the drilling points using the mounting plate as a template.
- Drill Holes: Drill holes at the marked positions and insert the wall plugs.
- Connect Wiring: Open the wiring compartment of the projector. Connect the mains supply cables (Live 'L' and Neutral 'N') to the terminal block as indicated. Ensure secure connections.
- Secure Mounting Plate: Attach the mounting plate to the wall using the provided screws and spacers.
- Attach Projector: Secure the projector body to the mounting plate. Ensure all seals are correctly seated to maintain the IP44 rating.
- Insert Bulb: Carefully insert the GU10 LED bulb into the lamp holder.
- Adjust Direction: Adjust the projector head to the desired angle (up to 180° horizontally and 90° vertically).
Image: Wiring connections for Live (L) and Neutral (N) within the projector base.
Operating Instructions
The Steinel Spot ONE (Model 058623) is a non-sensor outdoor projector designed for continuous illumination. Once installed and powered, the light will operate according to the external switch it is connected to.
- Power On/Off: Control the light using the wall switch connected to the projector's power supply.
- Adjusting Light Direction: The projector head can be manually adjusted to direct light as needed. Gently swivel the head horizontally up to 180° and tilt it vertically up to 90°.
Image: Multiple Spot ONE projectors providing ambient lighting on an outdoor patio.
Maintenance
1. Cleaning
- Ensure the power supply is disconnected before cleaning.
- Clean the projector's exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.
- Regularly remove any dirt or debris that may accumulate on the lens to ensure optimal light output.
2. Bulb Replacement
- Disconnect the power supply to the projector.
- Allow the bulb to cool completely if it has been recently in use.
- Carefully remove the existing GU10 LED bulb.
- Insert a new GU10 LED bulb, ensuring it is securely seated.
- Reconnect the power supply.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Faulty bulb. Incorrect wiring. | Check circuit breaker and wall switch. Replace GU10 LED bulb. Verify wiring connections (consult a qualified electrician if unsure). |
| Light flickers. | Loose bulb connection. Unstable power supply. Faulty bulb. | Ensure bulb is securely seated. Check household electrical system. Replace GU10 LED bulb. |
| Reduced light output. | Dirty lens. Aging bulb. | Clean the projector lens. Replace GU10 LED bulb. |
If the problem persists after attempting these solutions, please contact Steinel customer support or a qualified electrician.
Technical Specifications
| Model Number | 058623 |
| Dimensions (L x W x H) | 17.5 x 9.7 x 9.8 cm |
| Weight | 0.562 kg |
| Power Supply | 220 - 240 V / 50 - 60 Hz |
| Wattage | 6.7 W |
| Luminous Flux | 512 lm |
| Color Temperature | 3000 K (Warm White) |
| Bulb Type | GU10 LED (interchangeable) |
| Material | Aluminum, Transparent Plastic |
| Protection Class | IP44 |
| Mounting Type | Wall Mount |
| Energy Efficiency Class | F |
Warranty and Support
Steinel products are manufactured to the highest quality standards. This product comes with a 3-year manufacturer's warranty from the date of purchase.
For warranty claims or technical support, please visit the official Steinel website or contact your local distributor. Detailed warranty conditions can be found at: www.steinel.de/garantie