1. Introduction
The Pulsar Core FXQ38 Thermal Riflescope Forward is a versatile thermal optic designed for enhanced observation and targeting. It functions as both a standalone thermal monocular and a front attachment for a riflescope, offering adaptability in various scenarios. Equipped with a high-resolution 384x288 sensor, it facilitates object detection at distances up to 1475 yards. Key features include noiseless shutter calibration, external power supply compatibility, and a lightweight, waterproof design, ensuring reliable performance in diverse environmental conditions.
Figure 1: The Pulsar Core FXQ38 Thermal Monocular, showcasing its compact design and objective lens.
2. Included Components
Upon unboxing your Pulsar Core Thermal Monocular, please verify that all the following components are present:
- Pulsar Core FXQ38 Thermal Monocular
- Attachment's eyepiece
- Carrying case
- Torque screwdriver
- Wireless remote control
- Hand strap
- User Manual (this document)
- Cleaning cloth
- Warranty Card
- 2x CR123 Batteries
Figure 2: All components included with the Pulsar Core FXQ38, laid out for inspection.
3. Setup
3.1. Battery Installation
The Pulsar Core FXQ38 operates on two CR123 batteries. To install or replace batteries:
- Locate the battery compartment on the side of the device.
- Rotate the battery compartment cover counter-clockwise to open.
- Insert two CR123 batteries, ensuring correct polarity as indicated inside the compartment.
- Replace the cover and rotate clockwise until securely fastened.
3.2. Initial Power-On
Press and hold the power button (typically located on the top panel) for a few seconds until the display illuminates. The device will perform a self-check before becoming operational.
4. Operating the Device
4.1. Modes of Operation
The Core FXQ38 offers three distinct modes to optimize image clarity across different environments:
- Forest Mode: Optimized for viewing in dense wooded areas, enhancing contrast for targets against foliage.
- Rocks Mode: Designed for rocky or mountainous terrain, providing improved detail and thermal differentiation.
- Identification Mode: Offers the highest level of detail for precise target identification.
Switch between modes using the dedicated control buttons on the top of the unit. Refer to the on-screen interface for current mode selection.
4.2. Digital Zoom
The device features a 2x digital zoom. Activate the digital zoom to magnify the image for closer inspection of distant objects. Note that digital zoom may reduce image resolution compared to optical magnification.
4.3. Monocular and Front Attachment Use
The Core FXQ38 can be used as a handheld thermal monocular for observation or attached to a riflescope as a thermal front attachment. To convert to a riflescope attachment, remove the monocular eyepiece and attach the appropriate adapter (sold separately) to your riflescope's objective lens. This allows for seamless integration without affecting the riflescope's zero.
Figure 3: Side view of the Pulsar Core FXQ38, highlighting its compact form factor.
Figure 4: Opposite side view of the Pulsar Core FXQ38, showing control knob and battery compartment.
4.4. User Interface
The device features a user-friendly interface with intuitive controls. The main control buttons are located on the top panel, allowing for easy navigation through menus and settings. The display provides real-time information, including selected mode, battery status, and digital zoom level.
Video 1: Official product video demonstrating the features and operation of the Pulsar Core FXQ38 Thermal Monocular/Front Attachment.
5. Maintenance
5.1. Cleaning
To maintain optimal performance and longevity of your Pulsar Core FXQ38, regular cleaning is recommended:
- Use the provided cleaning cloth or a soft, lint-free cloth to gently wipe the exterior of the device.
- For lenses, use a specialized lens cleaning solution and a microfiber cloth to avoid scratches. Do not use abrasive materials or harsh chemicals.
- Ensure the objective lens cover is closed when not in use to protect the lens from dust and debris.
5.2. Storage
When storing the device for extended periods, remove the batteries to prevent leakage. Store in the provided carrying case in a cool, dry place away from direct sunlight and extreme temperatures.
6. Troubleshooting
This section addresses common issues you might encounter with your Pulsar Core FXQ38. If the problem persists, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low or dead batteries; incorrect battery installation. | Replace batteries with fresh ones; ensure correct polarity. |
| Poor image quality/blurry image. | Lens is dirty; improper focus; environmental factors (fog, heavy rain). | Clean lenses; adjust focusing ring; wait for environmental conditions to improve. |
| Display freezes or becomes unresponsive. | Software glitch; temporary malfunction. | Perform a hard reset by removing and reinserting batteries. |
7. Specifications
Detailed technical specifications for the Pulsar Core FXQ38 Thermal Monocular:
| Feature | Specification |
|---|---|
| Microbolometer Resolution | 384x288 |
| Frame Rate | 50 Hz |
| Pixel Pitch | 17 µm |
| Display Resolution | 640x480 |
| Display Type | AMOLED |
| Magnification | 3.1x |
| Digital Zoom | 2x |
| Objective Lens Diameter | 32mm |
| Eye Relief | 16mm |
| Field of View (ft@100yd) | 51.6 |
| Range of Detection | 1475 yards |
| Battery Type | 2x CR123 |
| Battery Life | 4 hours |
| Dimensions | 7 x 2.6 x 2.5 inches |
| Weight | 16.2 oz |
| Operating Temperatures | -25°C to +50°C |
| Waterproof Rating | IPX7 |
| Shockproof | Yes (Large Caliber) |
Figure 5: Detailed technical specifications for the Pulsar Core FXQ38.
8. Warranty and Support
The Pulsar Core FXQ38 Thermal Monocular is covered by a 3 Year Limited Warranty. Please refer to the included Warranty Card for detailed terms and conditions. For technical support, service, or warranty claims, please contact Pulsar customer service through their official website or the contact information provided on your warranty card.
For additional resources and product information, visit the official Pulsar website: www.pulsarnv.com
