Tilswall Cordless Electric Spin Scrubber M1 User Manual

1. Introduction

Thank you for choosing the Tilswall Cordless Electric Spin Scrubber M1. This device is designed to simplify your cleaning tasks with its powerful motor, extendable handle, and versatile brush heads. Please read this manual thoroughly before use to ensure safe and efficient operation.

2. Product Overview & Included Components

The Tilswall Cordless Electric Spin Scrubber M1 comes with the following components:

• 1 x Extendable Scrubber Handle
• 1 x Hook for storage
• 4 x Interchangeable Brush Heads (Hard Flat, Small Flat, Corner Round, Pointed)
• 1 x USB-C Charging Cable

Image: The Tilswall Electric Spin Scrubber M1 and its included accessories, including the main unit, extension handle, and four distinct brush heads, neatly arranged in its packaging.

3. Setup & Initial Charging

3.1 Assembly

1. Unpack all components from the box.
2. Connect the main scrubber unit to the extension handle by aligning the connectors and twisting until it locks securely.
3. Select the desired brush head and attach it to the scrubber head by aligning the central shaft and twisting clockwise until it clicks into place.

3.2 Initial Charging

Before first use, fully charge the scrubber. The device features a 3.7V 4000mAh rechargeable battery.

1. Locate the charging port on the handle (usually covered by a rubber stopper for waterproofing).
2. Connect the provided USB-C charging cable to the port and plug the other end into a compatible USB power adapter (not included).
3. The LED indicators on the handle will show the charging status (e.g., 30%, 80%, 100%). A full charge typically takes 3-4 hours.
4. Once fully charged, disconnect the cable and ensure the rubber stopper is securely closed to maintain IPX7 waterproofing.

Image: Detail of the scrubber's handle, highlighting the power button and LED battery indicators for monitoring charge levels.

4. Operating Instructions

4.1 Attaching/Detaching Brush Heads

• To attach: Align the brush head with the scrubber's rotating shaft and twist clockwise until it locks.
• To detach: Twist the brush head counter-clockwise and pull it off.

4.2 Adjusting the Handle Length

The handle can be extended up to 43 inches for reaching high or low areas without bending.

1. Press the release button located on the handle.
2. Extend or retract the handle to the desired length.
3. Release the button to lock the handle in place.

Image: A visual guide illustrating the adjustable handle of the scrubber, showing both its compact and extended configurations for versatile cleaning.

4.3 Powering On/Off & Usage

1. Press the power button on the handle to turn the scrubber on.
2. Apply a suitable cleaning solution to the surface or brush head.
3. Gently press the rotating brush against the surface to be cleaned. Avoid excessive pressure, as the motor is designed for efficient scrubbing with light contact.
4. Move the scrubber across the surface in a steady motion.
5. After cleaning, press the power button again to turn the scrubber off.

5. Maintenance

5.1 Cleaning the Brush Heads

After each use, remove the brush head and rinse it thoroughly under running water to remove any dirt or cleaning solution residue. Allow the brush heads to air dry completely before storing.

5.2 Cleaning the Scrubber Unit

The main unit is IPX7 waterproof, allowing it to be used in wet environments. Wipe the main unit with a damp cloth to clean it. Do not submerge the entire unit in water for extended periods, especially the charging port area unless the rubber stopper is fully sealed.

5.3 Storage

Store the scrubber in a cool, dry place. Use the provided hook to hang the scrubber for convenient storage and to allow it to dry properly.

6. Troubleshooting

7. Specifications

8. Warranty & Support

Tilswall offers a 1-year money-back guarantee, a 1-year warranty, and lifetime worry-free user support for this product. For any inquiries or assistance, please contact Tilswall customer service.