Black Shark BHB06

Download PDF
Contents

Black Shark Support Gamepad 2.0 User Manual

Model: BHB06

Introduction

Thank you for choosing the Black Shark Support Gamepad 2.0. This manual provides essential information for setting up, operating, and maintaining your device. Designed to enhance your mobile gaming experience, this gamepad support offers a comfortable and intuitive way to play.

The Black Shark Support Gamepad 2.0 features an ergonomic design and custom-molded grips for a comfortable fit. It allows for instant play by simply sliding and clipping your device into place.

Product Overview

Front view of Black Shark Support Gamepad 2.0

Figure 1: Front view of the Black Shark Support Gamepad 2.0. This image shows the ergonomic design with the central Black Shark logo and the two side grips.

Rear view of Black Shark Support Gamepad 2.0

Figure 2: Rear view of the Black Shark Support Gamepad 2.0. This image highlights the back of the device, showing the "BLACK SHARK" branding and the attachment points for the gamepad modules.

Setup

Follow these steps to set up your Black Shark Support Gamepad 2.0:

  1. Unpack: Carefully remove the gamepad support from its packaging. Ensure all components are present.
  2. Identify Left and Right Modules: The Black Shark Gamepad 2.0 consists of two separate modules (left and right) that attach to this support. Identify which module is for the left side and which is for the right.
  3. Attach Gamepad Modules: Align the left gamepad module with the left slot on the support and slide it into place until it clicks securely. Repeat for the right gamepad module. The design allows for a simple slide and clip mechanism.
  4. Insert Phone: Once the gamepad modules are attached, gently insert your Black Shark phone (or compatible device) into the central slot of the support. Ensure it is seated firmly and securely.
  5. Power On (if applicable): If your gamepad modules require power or pairing, follow their specific instructions. The support itself is a passive accessory.

For optimal performance, ensure your phone's software and the gamepad modules' firmware are up to date.

Operating

The Black Shark Support Gamepad 2.0 is designed for intuitive use once assembled:

  • Ergonomic Grip: Hold the assembled gamepad support with your phone and modules as you would a traditional console controller. The custom-molded design is intended to fit comfortably in your hands for extended gaming sessions.
  • Access Controls: Ensure that all buttons, joysticks, and triggers on your attached Black Shark Gamepad 2.0 modules are easily accessible and not obstructed by the support.
  • Gaming Experience: Launch your desired mobile game. The support provides a stable and comfortable platform, allowing you to focus on the game.
  • Portability: The compact design allows for easy transport. When not in use, you can detach the gamepad modules for more compact storage, or keep them attached for quick access.

Maintenance

Proper care will ensure the longevity of your Black Shark Support Gamepad 2.0:

  • Cleaning: Use a soft, dry, lint-free cloth to wipe the surface of the gamepad support. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the material.
  • Storage: Store the gamepad support in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid dropping the device or subjecting it to strong impacts, which could cause structural damage.
  • Module Attachment Points: Periodically inspect the attachment points for the gamepad modules to ensure they are free of debris and not damaged, which could affect the secure fit.

Troubleshooting

This section addresses common issues you might encounter with the Black Shark Support Gamepad 2.0. As this is a passive support, most issues will relate to physical fit or stability.

ProblemPossible CauseSolution
Gamepad modules do not attach securely.Incorrect alignment; debris in attachment slots; damaged attachment points.
  • Ensure correct left/right module alignment.
  • Check for and remove any debris from the slots on both the support and the modules.
  • Inspect attachment points for visible damage. If damaged, contact support.
Phone does not fit or is loose in the central slot.Incorrect phone model; phone case interfering; debris in slot.
  • Verify your phone model is compatible with the Black Shark Gamepad 2.0 system.
  • Remove any bulky phone cases that might prevent a proper fit.
  • Clean the central slot of any debris.
Support feels uncomfortable during use.Improper grip; extended use without breaks.
  • Adjust your grip to find the most comfortable position.
  • Take regular breaks during long gaming sessions.

Specifications

FeatureDetail
Model NumberBHB06
Product TypeGamepad Support
CompatibilityBlack Shark Gamepad 2.0 modules and compatible Black Shark phones
Dimensions (Package)20.8 x 15.8 x 7.6 cm
Weight (Package)100 grams
Key FeaturesErgonomic design, custom-molded grips, instant slide-and-clip attachment

Warranty and Support

Specific warranty information for the Black Shark Support Gamepad 2.0 is not available in the provided product details. Please refer to the official Black Shark website or your point of purchase for detailed warranty terms and conditions.

For technical support, product inquiries, or service requests, please visit the official Black Shark support page or contact their customer service directly. Keep your purchase receipt and model number (BHB06) handy when contacting support.

© 2023 Black Shark. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.