Melitta Look Timer 1025-08 Filter Coffee Machine User Manual

1. Introduction

Thank you for choosing the Melitta Look Timer 1025-08 Filter Coffee Machine. This manual provides important information for the safe and efficient operation, maintenance, and troubleshooting of your appliance. Please read these instructions carefully before first use and keep them for future reference.

Important Safety Instructions

• Always ensure the coffee machine is placed on a stable, level, and heat-resistant surface.
• Do not immerse the appliance, power cord, or plug in water or other liquids.
• Keep the appliance out of reach of children.
• Unplug the coffee machine from the power outlet when not in use and before cleaning.
• Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• Use only Melitta original accessories and spare parts.
• This appliance is intended for household use only.

2. Product Overview

Familiarize yourself with the components of your Melitta Look Timer 1025-08 coffee machine.

Image 2.1: Front view of the Melitta Look Timer 1025-08 coffee machine, showing the main unit, glass carafe, control panel, and water tank.

Image 2.2: Overview of key features including the AromaSelector, removable water tank, swivel filter with drip stop, and digital timer display.

Components:

1. Water Tank (removable)
2. Lid for Water Tank
3. AromaSelector Dial
4. Swivel Filter Holder
5. Filter Insert
6. Drip Stop Mechanism
7. Glass Carafe with Lid
8. Heating Plate
9. Control Panel with Display and Buttons (h, m, TIMER, CALC, ON/OFF)
10. Power Cord

3. Setup and First Use

3.1 Unpacking and Initial Cleaning

• Remove all packaging materials and stickers from the appliance.
• Clean the glass carafe, its lid, and the filter insert with warm water and a mild detergent. Rinse thoroughly.
• Wipe the exterior of the coffee machine with a damp cloth.

3.2 First Operation (Cleaning Cycle)

Before brewing coffee for the first time, run two full cycles with only water to clean the internal components.

1. Fill the removable water tank with fresh, cold water up to the "10 cups" mark.
   

   Image 3.1: A hand demonstrating the removal of the water tank for easy filling.
2. Place the empty glass carafe with its lid on the heating plate.
3. Press the ON/OFF button. The indicator light will illuminate.
4. Allow the water to run through completely.
5. Discard the water and repeat the process once more with fresh water.

3.3 Setting Water Hardness (for Descaling Reminder)

The coffee machine has a descaling reminder function. For optimal performance, set the water hardness level according to your local water supply.

• Consult your local water supplier for information on water hardness in your area.
• Refer to the detailed instructions in the "Maintenance" section for setting the water hardness level.

4. Operating Instructions

4.1 Brewing Coffee

1. Fill the removable water tank with the desired amount of fresh, cold water. The tank has markings for cups.
2. Insert a Melitta filter paper (size 1x4 or similar) into the filter insert.
3. Add the desired amount of ground coffee into the filter paper. A general guideline is one level tablespoon of coffee per cup (125 ml).
4. Close the swivel filter holder. Ensure the glass carafe with its lid is correctly placed on the heating plate.
5. Adjust the AromaSelector dial to your preferred coffee strength (mild to strong).
   

   Image 4.1: Top view showing the AromaSelector dial for adjusting coffee strength.

6. Press the ON/OFF button. The indicator light will illuminate, and the brewing process will begin.
7. Once brewing is complete, the coffee machine will automatically switch to the keep-warm function.
8. The appliance will automatically switch off after a preset time (e.g., 20, 40, or 60 minutes, depending on settings).

4.2 Using the Timer Function

The timer function allows you to program the coffee machine to start brewing at a specific time.

Image 4.2: Close-up of the control panel, highlighting the digital display and the 'h', 'm', and 'TIMER' buttons.

1. First, set the current time:
   • Press and hold the h button to set the hour.
   • Press and hold the m button to set the minute.
2. Prepare the coffee machine for brewing as described in section 4.1 (fill water, add filter and coffee).
3. Press the TIMER button. The display will show "TIMER" and the previously set timer start time (or default).
4. Use the h and m buttons to set the desired start time for brewing.
5. Press the TIMER button again to activate the timer. The timer indicator will light up.
6. The coffee machine will automatically start brewing at the programmed time.
7. To cancel the timer, press the TIMER button until the indicator light turns off.

5. Cleaning and Maintenance

Regular cleaning and descaling ensure optimal performance and extend the lifespan of your coffee machine.

5.1 Daily Cleaning

• Always unplug the appliance before cleaning.
• Remove the filter insert and glass carafe. Wash them with warm water and a mild detergent. They are also dishwasher safe.
• Wipe the exterior of the coffee machine with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
• Clean the heating plate with a damp cloth after it has cooled down.

5.2 Descaling

The CALC button indicator will illuminate when descaling is required. The frequency of descaling depends on water hardness and usage.

1. Ensure the coffee machine is unplugged and cooled down.
2. Remove any used filter paper and coffee grounds.
3. Fill the water tank with a descaling solution according to the descaler manufacturer's instructions. Melitta recommends using its own descaling products.
4. Place the empty glass carafe with its lid on the heating plate.
5. Press the CALC button. The descaling process will begin.
6. Allow the descaling solution to run through completely.
7. After the descaling cycle, run two full cycles with fresh, cold water to rinse the machine thoroughly.
8. The CALC indicator will turn off once the descaling process is complete and the machine has been rinsed.

5.3 Setting Water Hardness (Detailed)

To adjust the water hardness setting for the descaling reminder:

• With the machine off, press and hold the CALC button for approximately 3 seconds.
• The display will show the current water hardness setting (e.g., H1, H2, H3, H4).
• Press the h button to cycle through the hardness levels (H1 = soft, H4 = very hard).
• Once the desired hardness level is displayed, press the CALC button again to confirm and save the setting.

6. Troubleshooting

Refer to this section for common issues and their solutions.

7. Technical Specifications

• Model: Melitta Look Timer 1025-08
• Type: Filter Coffee Machine
• Color: Black
• Capacity: 1.25 liters (approx. 10 cups)
• Voltage: 230 Volts
• Dimensions (L x W x H): 8.27 x 9.45 x 13.19 inches (210 x 240 x 335 mm)
  

  Image 7.1: Diagram illustrating the dimensions of the coffee machine.

• Weight: 2.2 pounds (approx. 1 kg)
• Special Features: Timer function, AromaSelector, Removable water tank, Automatic shut-off, Descaling program.

8. Warranty and Support

Melitta products are manufactured to high quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Melitta website.

For technical support, spare parts, or service inquiries, please contact Melitta customer service. Contact information can typically be found on the Melitta website or on the product packaging.

Online Resources: www.melitta.com