SupplySource AC/DC Adapter User Manual

1. Introduction

This manual provides essential information for the safe and effective use of the SupplySource AC/DC Adapter. This product is designed as a direct replacement power supply for specific Radio Shack models, including the 63-3010, 633010 Security Wand Body Scanner, and Metal Detector Archer Cat. No. 273-1652, 2731652. It functions as a power supply cord, cable, battery wall charger, and mains PSU, ensuring compatibility and reliable performance for your device.

Before using the adapter, please ensure that the DC output and tip size of this AC adapter are compatible with your device's requirements. Refer to your device's original specifications or user manual for verification.

2. Safety Information

Adherence to the following safety guidelines is crucial for preventing damage to the adapter, your device, and ensuring user safety.

• Voltage Compatibility: Ensure the input voltage range of the adapter (100-240V) is suitable for your electrical outlet.
• Output Matching: Verify that the adapter's DC output voltage and current match the requirements of your device. Incorrect voltage can cause damage.
• Overcharge Protection: The adapter includes built-in overcharge protection to safeguard your device's battery.
• Over Voltage Protection: Integrated circuitry protects against excessive voltage input.
• Short-circuit Protection: Designed to prevent damage from short circuits.
• Over Current Protection: Protects against excessive current flow.
• Over Temperature Protection: Helps prevent overheating during operation.
• Ventilation: When using the adapter for extended periods, ensure it is placed in a well-ventilated area to prevent heat buildup. Do not cover the adapter or place it on soft surfaces that could obstruct airflow.
• Placement: Avoid placing the adapter on skin products or other materials that may retain heat or interfere with ventilation.
• Certifications: This charger is certified with CE and FCC, indicating compliance with relevant safety and quality standards.

Figure 1: The SupplySource AC/DC Adapter highlighting its built-in safety electronics, including protections against overcharge, over voltage, short-circuit, over current, and over temperature.

3. Setup and Installation

Follow these steps to properly set up and install your AC/DC adapter:

1. Inspect the Adapter: Before use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
2. Verify Compatibility: Confirm that the adapter's connector type (Barrel Connector) and power specifications match your device's input port and power requirements.
3. Connect to Device: Insert the barrel connector end of the adapter cable firmly into the power input port of your Radio Shack Security Wand or Metal Detector.
4. Connect to Power Outlet: Plug the 2-pin main power connector of the adapter into a standard 100-240V AC wall outlet.
5. Power On: Once connected, your device should receive power or begin charging its internal battery, if applicable.

Figure 2: The SupplySource AC/DC Adapter featuring its compact design and coiled power cable, ready for connection.

4. Operating Instructions

The SupplySource AC/DC Adapter is designed for straightforward operation:

• Powering Devices: Once properly connected to both the device and a power outlet, the adapter will supply continuous power to your device.
• Charging Batteries: If your device has a rechargeable battery, the adapter will automatically initiate the charging process when connected.
• Disconnection: To disconnect, first unplug the adapter from the wall outlet, then disconnect the barrel connector from your device.

5. Maintenance

Proper maintenance ensures the longevity and safe operation of your adapter:

• Cleaning: Disconnect the adapter from all power sources before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
• Cable Care: Do not bend, twist, or pull the cable excessively. Avoid placing heavy objects on the cable.
• Environmental Conditions: Keep the adapter away from water, high humidity, and corrosive environments.

6. Troubleshooting

If you encounter issues with your adapter, consider the following:

• No Power to Device:
  • Ensure the adapter is securely plugged into a working wall outlet.
  • Verify the barrel connector is fully inserted into your device's power port.
  • Check if the wall outlet is functional by plugging in another device.
  • Inspect the adapter cable for any visible damage.
• Device Not Charging:
  • Confirm that your device's battery is not fully charged or defective.
  • Ensure the adapter's output specifications (voltage, amperage) match your device's charging requirements.
• Adapter Overheating:
  • Disconnect the adapter immediately.
  • Ensure it is in a well-ventilated area and not covered.
  • If overheating persists, discontinue use and contact support.

If troubleshooting steps do not resolve the issue, please contact SupplySource customer support for assistance.

7. Specifications

Figure 3: Side profile of the AC/DC Adapter illustrating its compact size and the 4-foot cable length.

8. Warranty and Support

SupplySource stands behind the quality of its products with the following warranty and support:

• Money Back Guarantee: 30 Days Money Back Guarantee.
• Free Exchange: 60 Days Free Exchange With Paid Return Label.
• Worry-Free Warranty: 720 Days Anytime Worry-Free Warranty.

For any questions, concerns, or warranty claims, please feel free to contact SupplySource customer support. We are committed to assisting you with any inquiries you may have regarding your product.

Note: This adapter is a brand new, high-quality replacement and is not an OEM (Original Equipment Manufacturer) product. Please ensure the model of your device before purchasing.