1. Introduction
Thank you for choosing the KCO Lighting W1032-C Vanity Wall Sconce. This modern wall light features a brushed brass finish and a clear bubble glass globe, designed to provide a balanced lighting source for various indoor settings. This manual provides essential information for safe installation, operation, and maintenance of your new lighting fixture.
2. Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- Read all instructions carefully before beginning installation.
- All electrical connections must be in accordance with local codes, ordinances, or national electrical code (NEC).
- Consult a qualified electrician if you are unsure about wiring or installation procedures.
- Do not install this fixture in wet locations. For indoor use only.
- Ensure the fixture is securely mounted to a structural element of the building.
- Use only the specified bulb type and wattage (E26, max 60 watts).
- Do not touch the bulb directly with bare hands; use a clean cloth or gloves.
3. Package Contents
Verify that all components are present before beginning installation:
- Wall Sconce Fixture (Brushed Brass with Clear Bubble Glass Globe)
- Mounting Hardware Kit (includes mounting plate, screws, wire nuts)
- Installation Manual
- Note: E26 bulb is not included.
4. Specifications
| Feature | Detail |
|---|---|
| Brand | KCO |
| Model Number | W1032-C |
| Color | Gold + Clear |
| Material | Glass, Metal |
| Style | Modern |
| Light Fixture Form | Sconce |
| Room Type | Living room, dining room, bedroom, bathroom, kitchen, hallway, coffee shop, stairway, corridor |
| Power Source | Corded Electric |
| Light Source | LED (Bulb not included) |
| Number of Light Sources | 1 |
| Voltage | 100-220 Volts (Worldwide compatible) |
| Wattage | Max 60 watts |
| Bulb Base | E26 |
| Mounting Type | Wall Mount |
| Installation Type | Hardwired (Flush Mount) |
| Required Assembly | Yes |
| Item Dimensions (L x W x H) | 8.2" x 5.9" x 23.2" (21cm x 15cm x 59cm) |
| Globe Diameter | 5.9" (15cm) |
| Canopy Diameter | 4.7" (12cm) |
| Item Weight | 2.1 Pounds |
5. Setup and Installation
This wall sconce is designed for hardwired installation. Please follow these steps carefully. It is recommended to have a qualified electrician perform the installation.
- Prepare for Installation:
- Turn off power at the circuit breaker or fuse box to avoid electrical shock.
- Ensure the mounting surface is clean, dry, and structurally sound.
- Unpack all components and verify against the package contents list.
- Assemble the Fixture (Pre-installation):
- Unscrew the fixing screws from the lamp holder.
- Carefully install the E26 bulb (not included) into the lamp holder.
- Place the clear glass lampshade over the bulb and secure it by screwing the fixing screws back into place.
- Attach any extension poles if necessary, ensuring they are securely tightened.
- Install the chassis (mounting plate) to the fixture, ensuring the wires are correctly routed.
Video: Assembly steps for the KCO Lighting Wall Sconce, demonstrating bulb and lampshade installation, and chassis attachment. - Mounting the Fixture:
- Attach the mounting plate to the junction box in your wall using the provided screws.
- Connect the fixture's wires to the house wires:
- Connect the black wire (live) from the fixture to the black wire from the junction box.
- Connect the white wire (neutral) from the fixture to the white wire from the junction box.
- Connect the green or bare copper wire (ground) from the fixture to the ground wire from the junction box.
- Secure all connections with wire nuts and electrical tape.
- Carefully tuck all wires into the junction box.
- Align the fixture's canopy with the mounting plate and secure it with the decorative nuts or screws.
- Final Check:
- Ensure all connections are tight and secure.
- Restore power at the circuit breaker or fuse box.
- Test the light fixture.
6. Operating Instructions
Once properly installed and powered, the KCO Lighting W1032-C Vanity Wall Sconce operates via a standard wall switch (not included). Ensure the bulb is correctly installed before turning on the power.
- To turn the light ON, flip the connected wall switch to the 'ON' position.
- To turn the light OFF, flip the connected wall switch to the 'OFF' position.
7. Maintenance
Regular maintenance will help preserve the appearance and functionality of your wall sconce.
- Cleaning: Always disconnect power before cleaning. Use a soft, dry cloth to wipe the metal and glass surfaces. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement: Ensure power is off and the bulb has cooled completely before attempting to replace it. Unscrew the glass globe, then carefully unscrew the old E26 bulb and replace it with a new one (max 60 watts). Reattach the glass globe securely.
- Inspection: Periodically check for any loose connections or signs of wear. If any issues are found, consult a qualified electrician.
8. Troubleshooting
If your KCO Lighting Vanity Wall Sconce is not functioning as expected, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Glass globe is loose. |
|
|
9. Warranty and Support
KCO Lighting offers a 1-year professional after-sales service for this product. If you receive a broken, damaged, or cracked glass lampshade, a damaged lamp body, or are missing any parts, please communicate with the seller via your order number. We will send you a replacement as soon as possible.
For further assistance or inquiries, please refer to your purchase platform or contact KCO Lighting customer service directly.