Perlegear PGPIMFK1

Download PDF
Contents

Perlegear TV Wall Mount Bracket Full Motion User Manual

Model: PGPIMFK1

Introduction

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Perlegear Full Motion TV Wall Mount Bracket. Designed for 26-65 inch LED, LCD, OLED Flat Curved TVs, this mount offers dual swivel articulating arms, extension, and tilt capabilities, supporting VESA patterns up to 400x400mm and fitting 12/16" wood studs.

Perlegear Full Motion TV Wall Mount

Image: The Perlegear Full Motion TV Wall Mount Bracket, showcasing its robust design and articulating arms.

Safety Information

  • Read all instructions before installation. If you have any doubts, contact a qualified installer.
  • Ensure the mounting surface can safely support the combined weight of the mount and the TV.
  • Do not mount on drywall alone. This mount is designed for 12" to 16" wood studs and concrete/brick walls.
  • Use all provided hardware. Do not substitute parts.
  • Keep children and pets away during installation.
  • Periodically check the mount for signs of wear or loose connections.

Package Contents

Verify that all components are present before beginning installation:

  • TV Wall Mount Assembly
  • TV Brackets (2)
  • Wall Plate
  • Standard Mounting Hardware Kit (various screws, washers, spacers)
  • Bubble Level
  • Installation Guide

Setup and Installation

Follow these steps carefully for a secure installation.

1. Choose a Suitable Mounting Location

Ensure your wall type is compatible with the mount. This mount supports 12" to 16" wood studs and solid concrete/brick walls. Do not install on drywall alone.

Wall type compatibility for TV mount

Image: Illustration showing compatibility with 12" to 16" wood studs and concrete walls, along with VESA pattern and cable outlet considerations.

Diverse Wall Compatibility

Image: Visual guide for diverse wall compatibility, emphasizing not to mount on drywall alone.

2. Install the Wall Plate

Locate wall studs using a stud finder. Mark the drilling positions. For wood studs, pre-drill pilot holes. For concrete/brick, use a masonry drill bit and wall anchors. Secure the wall plate firmly to the wall using the appropriate lag bolts and washers.

Video: Official Perlegear video demonstrating the installation process, including wall plate mounting for different wall types.

3. Attach Brackets to Your TV

Lay your TV face down on a soft, clean surface. Identify the VESA mounting holes on the back of your TV. Select the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. Attach the two vertical TV brackets to the back of your TV, ensuring they are securely fastened.

TV mount assembly steps

Image: Step-by-step visual guide for attaching brackets to the TV, installing the wall plate, and mounting the TV.

4. Mount the TV to the Wall Plate

With assistance, carefully lift the TV and hook the TV brackets onto the wall plate. Ensure the brackets are properly seated and engaged with the safety lock mechanism. Tighten any security screws to prevent accidental dislodgement.

Operating Instructions

Your Perlegear TV Wall Mount offers various adjustments for optimal viewing.

Extension and Retraction

Gently pull or push the TV to extend it up to 15.35 inches from the wall or retract it to a minimum of 3.98 inches. This allows for flexible positioning and space saving.

Tilt Adjustment

The mount allows for a vertical tilt angle ranging from +5° to -15°. Loosen the tilt adjustment knobs on the TV brackets, adjust to your desired angle, and then re-tighten the knobs to secure the position.

TV mount viewing experience adjustments

Image: Visual representation of the mount's ability to retract, extend, level adjust, tilt, and swivel for an optimized viewing experience.

Swivel Adjustment

Swivel your TV horizontally up to ±45° left or right to achieve the perfect viewing angle from any part of the room. The maximum swivel angle may vary depending on your TV size.

Screen Level Adjustment

Rotate the screen up to ±3° to ensure it is perfectly level after installation. This adjustment can be made even after the TV is mounted.

Detailed design of Perlegear TV mount parts

Image: Close-up view of key design features including safety lock, seamless welding, tilt adjust, and screen level adjustment points.

Maintenance

To ensure the longevity and safe operation of your TV wall mount, perform the following maintenance:

  • Cleaning: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
  • Periodic Checks: Every few months, check all screws and bolts to ensure they are tight and secure. Re-tighten if necessary.
  • Movement: If the articulating arms become stiff, a small amount of silicone-based lubricant can be applied to the pivot points.

Troubleshooting

ProblemPossible CauseSolution
TV is not level.Screen level adjustment needed.Use the ±3° screen level adjustment feature to correct the tilt. Refer to Operating Instructions.
Mount feels loose on the wall.Wall plate not securely fastened or wall material is inadequate.Check all lag bolts securing the wall plate. Ensure proper installation into wood studs or concrete/brick. If unsure, consult a professional.
TV does not tilt or swivel smoothly.Joints may be stiff or overtightened.Loosen tilt adjustment knobs slightly. Apply a small amount of silicone-based lubricant to articulating joints if needed.
TV does not fit the mount.Incorrect VESA pattern or TV size/weight.Verify your TV's VESA pattern (100x100mm-400x400mm), size (26-65 inches), and weight (max 99 lbs) against the mount's specifications.

Specifications

  • Brand: Perlegear
  • Model: PGPIMFK1
  • Compatible TV Sizes: 26-65 inches
  • Maximum Weight Capacity: 99 lbs
  • VESA Compatibility: 100x100mm to 400x400mm
  • Tilt Angle: +5° to -15°
  • Swivel Angle: ±45° (left to right)
  • Screen Level Adjustment: ±3°
  • Extension from Wall: 3.98 inches (min) to 15.35 inches (max)
  • Wall Compatibility: 12" to 16" Wood Studs, Concrete/Brick Walls
  • Material: Steel
  • Color: Dark Black
  • Item Weight: 9.13 pounds
  • Product Dimensions: 17.28 x 6.06 x 3.27 inches
  • UPC: 769135310797
VESA compatibility and weight capacity

Image: Diagram illustrating VESA compatibility ranges (100x100mm to 400x400mm) and maximum weight capacity of 99 lbs.

Warranty and Support

Perlegear stands behind the quality and durability of its products. For any questions, concerns, or assistance with your TV wall mount, please contact Perlegear customer service. Refer to the official Perlegear website or the contact information provided in your product packaging for support details.

A PDF version of the user manual is also available for download: Download User Manual (PDF)

© 2024 Perlegear. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.