Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your LEPOWER UF2012 Floor Lamp. Designed for versatility, this metal standing lamp features an adjustable gooseneck and a stable heavy metal base, suitable for various indoor environments such as offices, bedrooms, and living rooms. Please read these instructions carefully before use to ensure safe and optimal performance.
Image: Fully assembled LEPOWER UF2012 White Floor Lamp, showcasing its sleek design and adjustable gooseneck.
Safety Instructions
- Electrical Safety: Always unplug the lamp from the power outlet before cleaning, changing the bulb, or performing any maintenance.
- Bulb Compatibility: Use only E26 base bulbs with a maximum wattage of 40W. Exceeding this wattage may cause overheating and damage to the lamp or pose a fire hazard.
- Indoor Use Only: This lamp is designed for indoor use in dry locations. Do not expose to water or high humidity.
- Stable Placement: Ensure the lamp is placed on a flat, stable surface to prevent tipping. The heavy metal base is designed for stability, but proper placement is crucial.
- Cord Management: Do not place the power cord under rugs or in areas where it can be tripped over or damaged. Keep the cord away from heat sources.
- Children and Pets: Keep the lamp out of reach of small children and pets to prevent accidental knocking over or tampering with electrical components.
Package Contents
Verify that all components are present before beginning assembly:
- 1 x LEPOWER Metal Floor Lamp (consisting of base, pole segments, gooseneck, and lampshade)
- 1 x 1.8m AC Cord with an On/Off Switch
- 1 x User Manual (this document)
- Note: Bulb is not included.
Setup and Assembly
Assembly of the LEPOWER UF2012 Floor Lamp is straightforward and typically takes only a few minutes. No tools are required.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
- Assemble Pole Segments: Twist the pole segments together clockwise until they are securely tightened. Ensure each segment is firmly connected to form the main lamp pole.
- Attach to Base: Screw the assembled pole into the heavy metal base clockwise until it is stable and secure.
- Install Bulb: Insert an E26 base bulb (maximum 40W, not included) into the lamp socket by twisting it clockwise until snug. Do not overtighten.
- Connect Power: Plug the 1.8m AC cord into a standard electrical outlet.
Image: Diagram illustrating the dimensions of the LEPOWER Floor Lamp, including the length of the power cord and the location of the on/off switch.
Image: Close-up view of the universal E26 sized screw base, indicating where the bulb should be installed.
Operating Instructions
- Power On/Off: The lamp is operated using the convenient push-button switch located on the power cord. Press the switch to turn the lamp on, and press it again to turn it off.
- Adjusting the Light Angle: The lamp features a flexible gooseneck. Gently bend the gooseneck to direct the light to your desired position for reading, working, or ambient lighting.
Image: The LEPOWER Floor Lamp demonstrating its adjustable gooseneck, allowing for flexible positioning of the light source.
Maintenance
- Cleaning: Ensure the lamp is unplugged before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
- Bulb Replacement: Always unplug the lamp before replacing the bulb. Allow the old bulb to cool completely before removing it. Screw in a new E26 base bulb (max 40W) clockwise until snug.
- Inspection: Periodically inspect the power cord and plug for any signs of damage. If damage is found, discontinue use and contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Lamp flickers. |
|
|
| Lamp is unstable. |
|
|
Specifications
| Model Number | UF2012 |
| Brand | LEPOWER |
| Product Dimensions | 8"D x 5"W x 58"H (approximate, fully extended) |
| Item Weight | 7 Pounds |
| Material | Metal |
| Finish Type | Painted |
| Color | White |
| Bulb Base | E26 |
| Max Wattage | 40W (Bulb not included) |
| Switch Type | Push Button (on cord) |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Special Features | Adjustable Gooseneck, Modern Design, Not Dimmable |
| Indoor/Outdoor Usage | Indoor Use Only |
Warranty and Support
LEPOWER products are manufactured with quality and durability in mind. For specific warranty information regarding your UF2012 Floor Lamp, please refer to the warranty card included with your purchase or visit the official LEPOWER website. If you encounter any issues or have questions not covered in this manual, please contact LEPOWER customer support for assistance.
Contact Information: Please refer to the packaging or the official LEPOWER website for the most current customer support contact details.
