ANJAYLIA 66ft 200 LED Rope Lights User Manual

Introduction

This manual provides instructions for the safe and effective use of your ANJAYLIA 66ft 200 LED Rope Lights. Please read this manual thoroughly before installation and operation, and retain it for future reference.

Figure 1: ANJAYLIA 66ft 200 LED Rope Lights, including the coiled rope light, remote control, and power adapter.

Package Contents

Verify that all items listed below are included in your package:

• 1 x 66ft (200 LEDs) Rope Light Tube
• 1 x Lead Wire with Controller Box
• 1 x Power Adapter (12V UL Certified)
• 1 x Remote Controller
• 1 x User Manual (this document)

Figure 2: Illustration of the package contents, including the rope light, power adapter, and remote control. Note: The image shows two remotes, but the product description states one remote controller is included.

Setup Instructions

1. Unpack Components: Carefully remove all items from the packaging. Inspect for any damage.
2. Connect Rope Light: Connect the end of the 66ft LED rope light tube to the lead wire with the controller box. Ensure the connection is secure.
3. Connect Power Adapter: Attach the power adapter to the controller box.
4. Placement: Determine the desired location for your rope lights. The flexible design allows for wrapping around trees, fences, railings, or outlining architectural features.
   

   Figure 3: Various installation examples for the rope lights, demonstrating their flexibility for decorative purposes.
5. Secure Installation: Use clear packing tape or clips (not included) to secure the rope lights in place.
6. Power Connection: Plug the power adapter into a standard electrical outlet.

Operating Instructions

The ANJAYLIA LED Rope Lights are controlled using the included remote control. Ensure the remote has a working battery (CR2025, typically pre-installed with a pull tab). Remove the battery pull tab before first use.

Figure 4: Remote control layout and function descriptions.

Remote Control Functions:

• Power ON/OFF: Press the ON button to turn the lights on. Press OFF to turn them off. The lights will remember the last setting when turned off by the remote.
• 16 Colors Selection: Use the colored buttons (R, G, B, W, and other color swatches) to select one of 16 static colors.
• Dynamic Modes:
  • FADE: Colors gradually transition.
  • JUMP: Colors change abruptly.
  • ASYN FADE: Asynchronous gradual color transition.
  • ASYN JUMP: Asynchronous abrupt color change.
  • IN WAVES: Lights illuminate in a wave-like pattern.
  • STROBE: Lights flash rapidly. Press once for single color strobe, twice for red, blue, and white strobe.
  • TWINKLE: Lights twinkle. Press once for dual color twinkle, twice for red, blue, and white twinkle.
• AUTO: Cycles through the 7 dynamic lighting modes automatically.
• SPEED: Adjusts the speed of the dynamic modes. There are 4 speed levels.
• Timer Function: Press 4H, 6H, or 8H to set the lights to automatically turn off after 4, 6, or 8 hours, respectively. The 24H button may also be available for a continuous 24-hour cycle before turning off. Press TIMER OFF to deactivate the timer.
• Multicolor Mode: Press the multicolor button once for a general multicolor display.
• Triple Color Mode (Red, White, Blue): Press the multicolor button twice to activate a red, white, and blue lighting sequence, suitable for patriotic themes.

Figure 5: Visual representation of the 16 available static colors.

Maintenance

• Cleaning: Disconnect the power before cleaning. Gently wipe the rope lights with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: When not in use, coil the rope lights neatly and store them in a cool, dry place away from direct sunlight.
• Water Resistance: The rope light itself has an IP67 waterproof rating, making it suitable for outdoor use in various weather conditions. However, the controller box has an IP44 rating. Do not submerge the controller box in water. Ensure the power adapter and controller box are protected from direct exposure to heavy rain or standing water.
  

  Figure 6: Illustration of the rope light's water resistance and a caution regarding the controller box.

• Remote Battery Replacement: If the remote control stops responding, the battery may need replacement. The remote uses a CR2025 button cell battery. Carefully open the battery compartment on the back of the remote and replace the battery, ensuring correct polarity.

Troubleshooting

Specifications

Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact ANJAYLIA customer service through the retailer where the product was purchased. Please have your model number (B07WLLRKZ5) and purchase date available when contacting support.

You can also visit the official ANJAYLIA store for more information: ANJAYLIA Store