TOMALL M365

TOMALL Front Fork Fixing Screw Kit Instruction Manual

For Xiaomi M365 Electric Scooter

1. Product Overview

This TOMALL Front Fork Fixing Screw Kit is designed as a replacement or upgrade for the Xiaomi M365 Electric Scooter. It includes essential components for securing the front fork assembly.

Kit Components:

  • 1 x Front Fork Fixing Screw (Bolt)
  • 1 x Washer
  • 1 x Fixing Sleeve/Bushing
TOMALL Front Fork Fixing Screw Kit components: bolt, washer, and fixing sleeve

Image 1.1: The complete TOMALL Front Fork Fixing Screw Kit, showing the bolt, washer, and fixing sleeve.

2. Specifications

The following table details the specifications of the TOMALL Front Fork Fixing Screw Kit:

FeatureDescription
BrandTOMALL
Model CompatibilityXiaomi Mijia M365 Electric Scooter
MaterialHigh-quality Metal (Aluminum)
Special FeaturesLightweight, Anti-oxidation, Waterproof, High Hardness, Strong Tensile Strength
Item Weight0.02 Kilograms
UPC763944298574
ASINB07WJY7YVB
Detailed dimensions of the screw, washer, and fixing sleeve in centimeters and inches

Image 2.1: Dimensional diagram of the screw, washer, and fixing sleeve, showing measurements in centimeters and inches.

3. Installation Guide

Follow these steps to correctly install the Front Fork Fixing Screw Kit on your Xiaomi M365 Electric Scooter.

Required Tools:

  • Hex key (appropriate size for the screw head)

Installation Steps:

  1. Prepare the Scooter: Ensure the scooter is powered off and stable. If replacing an existing screw, carefully remove the old screw, washer, and fixing sleeve from the front fork assembly.
  2. Insert the Fixing Sleeve: Place the fixing sleeve into the designated opening in the front fork assembly. Ensure it sits flush and correctly aligned.
  3. Position the Washer: Place the washer onto the new screw.
  4. Insert and Tighten the Screw: Insert the screw with the washer through the fixing sleeve and into the threaded hole of the front fork. Use a hex key to gently tighten the screw. Do not overtighten, as this can damage the threads or components. Tighten until snug and secure.
Diagram showing the front fork fixing screw kit installed in the front fork of a Xiaomi M365 electric scooter

Image 3.1: Illustration of the screw kit's placement within the scooter's front fork assembly.

Close-up view of the screw kit being installed into the front fork of a Xiaomi M365 electric scooter

Image 3.2: A detailed view demonstrating the correct insertion of the screw kit into the scooter's front fork.

4. Operating Considerations

Once the front fork fixing screw kit is installed, ensure the following for safe operation:

  • Check Tightness: Before each ride, verify that the front fork screw is securely tightened. A loose screw can compromise steering stability.
  • Regular Inspection: Periodically inspect the screw and surrounding components for any signs of wear, damage, or corrosion.

5. Maintenance

Proper maintenance will extend the lifespan of your front fork fixing screw kit.

  • Cleaning: Keep the screw and surrounding area clean from dirt and debris. Use a soft cloth to wipe it down.
  • Corrosion Protection: The screw kit features an anti-oxidation coating. To maintain this, avoid harsh chemicals or abrasive cleaning materials.
  • Lubrication (Optional): If desired, a small amount of thread locker or grease can be applied to the screw threads during installation to prevent loosening and further protect against corrosion, though it is not strictly required due to the anti-oxidation properties.
Image illustrating the anti-oxidation coating of the screw kit components in water

Image 5.1: The screw kit components are shown in water, highlighting their anti-oxidation and waterproof properties.

6. Troubleshooting

If you encounter issues with the front fork fixing screw kit, consider the following:

  • Loose Screw: If the front fork feels wobbly, the screw may be loose. Retighten it using the appropriate hex key. Do not overtighten.
  • Difficulty in Tightening: Ensure the screw threads are clean and free of debris. Verify that the fixing sleeve is correctly seated and aligned. If the threads are stripped, the screw or the scooter's fork assembly may need replacement.
  • Incorrect Fit: Double-check that you have the correct screw kit for the Xiaomi M365 model. Refer to the specifications section.

7. Warranty Information

This product comes with a Limited Warranty. For specific details regarding the warranty period and coverage, please refer to the product packaging or contact the manufacturer directly. Standard return policies typically allow for refunds or replacements within 30 days of purchase.

8. Customer Support

For further assistance, technical support, or inquiries regarding the TOMALL Front Fork Fixing Screw Kit, please contact TOMALL customer service through their official website or the retailer where the product was purchased.

© 2024 TOMALL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.