Artist hand U3070 Adjustable Massage Table and Barber Stool User Manual

Introduction

This manual provides instructions for the safe assembly, operation, and maintenance of your Artist hand U3070 Adjustable Massage Table and Barber Stool. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.

Safety Information

Adhere to the following safety guidelines to prevent injury or damage to the product:

• Do not expose the product to liquids or excessive heat.
• Follow all assembly instructions carefully. Pay attention to potential sharp edges during the assembly process.
• Do not exceed the maximum weight capacity of 375 lbs (170 kg) for the massage table.
• Ensure the table and stool are placed on a stable, level surface before use.

Package Contents

Before beginning assembly, unpack all components and verify that the following items are present:

• Adjustable Massage Table (main frame, backrest, footrest sections)
• Barber Stool (seat, base, hydraulic cylinder, wheels)
• Removable Headrest Cushion
• Removable Armrests
• Assembly Hardware (screws, bolts, washers, nuts)
• Basic Assembly Tool (Allen wrench)

Image: The Artist hand U3070 Adjustable Massage Table in black with its accompanying barber stool.

Assembly Instructions

Assembly typically requires an Allen wrench (hex wrench) and a socket wrench for easier tightening in confined spaces. The provided instructions are primarily picture-based.

1. Unpack and Organize: Carefully remove all components from the packaging. Lay them out and identify each part by comparing them to the parts list in the included instruction sheet.
2. Assemble Massage Table Frame: Connect the main support legs and crossbars to form the base frame of the massage table. Secure all connections with the provided hardware. Ensure bolts are tightened firmly but do not overtighten.
3. Attach Bed Sections: Mount the backrest and footrest sections to the main frame. These sections typically attach with hinges or pivot points that allow for adjustment.
4. Install Armrests and Headrest: Slide or clip the armrests into their designated slots on the sides of the table. Insert the removable headrest cushion into the top section.
5. Assemble Barber Stool: Attach the wheels to the five-star base. Insert the hydraulic cylinder into the base, then place the stool seat onto the cylinder.
6. Final Check: Once assembly is complete, double-check all bolts and connections on both the table and stool to ensure they are secure and stable before initial use.

Image: Detailed view of the massage table highlighting features such as soft PU material, high-density sponge filling, removable and bendable handrails, easy operation, towel rack, and anti-skid footpads.

Operating Instructions

Adjusting the Massage Table

The Artist hand U3070 massage table features adjustable sections to accommodate various treatments and client positions.

• Backrest Adjustment: The backrest can be reclined from an upright position of 90° to a flat position of 180°. Locate the adjustment levers on the sides of the backrest section. Lift the lever, adjust the backrest to the desired angle, and release the lever to lock it in place.
• Footrest Adjustment: The footrest can be reclined from 45° to a flat position of 180°. Similar to the backrest, use the adjustment levers on the sides of the footrest section to set the preferred angle.
• Removable Headrest: The headrest cushion can be removed if a face cradle opening is required for certain procedures.
• Removable Armrests: The armrests are designed to be bendable and can be removed to provide easier client access or to facilitate specific treatments.

Image: Side view of the spa bed illustrating the range of motion for the adjustable head and footrest sections.

Using the Barber Stool

• Height Adjustment: To adjust the stool's height, locate the lever positioned under the seat. Lift the lever to raise the seat, or apply slight pressure to the seat while lifting the lever to lower it.
• Swivel Function: The stool is designed to swivel 360 degrees, allowing for easy movement and access around the client.
• Mobility: The five-star base with wheels provides smooth mobility, allowing you to reposition the stool effortlessly.

Image: The barber stool featuring a round, padded seat and a five-star wheeled base for mobility.

Maintenance

Regular maintenance ensures the longevity and hygienic condition of your massage table and stool.

• Cleaning Surfaces: Wipe down all PVC leather surfaces with a damp cloth and a mild, non-abrasive soap solution. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the material. A soft sponge is recommended for cleaning.
• Hardware Inspection: Periodically inspect all bolts, screws, and connections on both the table and stool. Tighten any loose hardware to maintain stability and safety.
• Storage: When not in use, store the massage table and stool in a dry, cool area away from direct sunlight and extreme temperature fluctuations.

Troubleshooting

Table or Stool Instability:

Ensure all assembly bolts are fully tightened. Verify that the table and stool are placed on a flat, stable surface. Confirm that the maximum weight capacity of 375 lbs is not exceeded.

Difficulty Adjusting Stool Height:

Check that the hydraulic lever is functioning correctly and is not obstructed. If the stool does not lift or lower smoothly, ensure no debris is interfering with the hydraulic mechanism.

Stool Swivel Issues:

Some stools may have a swivel lock mechanism. Ensure it is disengaged if you desire free rotation. If the stool feels stiff, check for any obstructions in the swivel mechanism.

Specifications

Warranty and Support

For specific warranty information or technical assistance, please refer to your purchase documentation or contact Artist hand customer service directly. Protection plans may be available for extended coverage, offering additional peace of mind.

For further inquiries, visit the official Artist hand store: Artist hand Store