1. Introduction
This manual provides essential instructions for the setup, operation, and maintenance of your JustFine Replacement Remote Control. This remote is designed to be compatible with various Sony Home Theater AV Receiver Systems, offering a direct replacement for your original remote without requiring complex programming.
2. Product Overview
The JustFine Replacement Remote Control is a pre-programmed infrared device designed for seamless integration with your compatible Sony Home Theater AV Receiver System. It replicates the functionality of your original remote, providing access to all necessary controls.
2.1 Remote Control Layout

Image 1: Front view of the JustFine Replacement Remote Control. This image displays the full array of buttons, including power, input selection, volume controls, navigation pad, and various function buttons for TV and AV receiver operations.
2.2 Battery Compartment

Image 2: Back view of the JustFine Replacement Remote Control. This image highlights the battery compartment, located on the lower half of the remote's back, designed for easy access to insert or replace batteries.
3. Setup
3.1 Battery Installation
Batteries are not included with this remote control. Please purchase two (2) AAA batteries separately.
- Locate the battery compartment on the back of the remote control (refer to Image 2).
- Press down on the tab and slide the battery compartment cover downwards to open it.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Once batteries are installed, the remote control is ready for use with your compatible Sony Home Theater AV Receiver System. No additional programming is required.
4. Operating Instructions
This remote control is pre-programmed and requires no additional setup for compatible Sony Home Theater AV Receiver Systems. Simply point the remote at your system and press the desired function button.
4.1 Basic Functions
- Power (I/O): Turns the AV Receiver System on or off.
- TV Power (TV I/O): Turns the connected television on or off.
- Volume (+/-): Adjusts the master volume level of the AV Receiver System.
- Muting: Mutes or unmutes the audio output.
- Input Selection (TV INPUT, DVD, etc.): Switches between different audio/video input sources.
- Navigation Pad (Up, Down, Left, Right, ENTER): Used to navigate menus and confirm selections.
- Play/Pause (►/⏸⏸): Controls playback for connected media devices.
- Stop (■): Stops playback.
- Fast Forward (►►)/Rewind (◄◄): Skips forward or backward during playback.
4.2 Advanced Functions
- THEATRE SYNC: Activates or deactivates the Theatre Sync function for integrated system control.
- DISPLAY: Toggles on-screen display information.
- FUNCTION: Cycles through various system functions or modes.
- AUDIO: Selects audio tracks or sound modes.
- SUBTITLE: Toggles subtitles on or off for compatible media.
- ANGLE: Changes the viewing angle for compatible DVD/Blu-ray content.
- DVD TOP MENU: Accesses the top menu of a DVD.
- RETURN: Returns to the previous menu or screen.
- PRESET (+/-): Navigates through radio presets or other programmed settings.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type.
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage. Store in a cool, dry place.
- Avoid Exposure: Do not expose the remote control to direct sunlight, heat sources, or excessive moisture.
6. Troubleshooting
- Remote not responding:
- Ensure batteries are inserted correctly with the correct polarity (+/-).
- Replace old batteries with new ones.
- Check for any obstructions between the remote control and the AV Receiver System's infrared sensor.
- Ensure you are within the effective range and pointing the remote directly at the system.
- Specific buttons not working:
- Clean the remote control surface, especially around the unresponsive buttons, to remove any dirt or debris.
- Verify that the function you are trying to use is supported by your specific Sony AV Receiver System model.
7. Specifications
| Product Dimensions | 4.53 x 1.57 x 1.38 inches |
| Item Weight | 2.72 ounces |
| Connectivity Technology | Infrared |
| Compatible Devices | Sony Home Theater AV Receiver Systems (DAV-DX155, DAV-DZ120, DAV-HDX465, HCD-DX155, HCD-HDX265, HCD-HDZ235) |
| Special Feature | Ergonomic design |
8. Warranty and Support
This JustFine Replacement Remote Control comes with a 30-day quality warranty, ensuring your satisfaction with its performance. If you encounter any problems or have questions regarding your remote control, please do not hesitate to contact us. Our support team is available to assist you with any issues.
For support inquiries, please refer to the contact information provided at the point of purchase or on the product packaging.