Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your SHOPLED 3FT LED Shop Light. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for indoor use in environments such as workshops, garages, basements, and utility areas, providing bright, cool white illumination.
Image: Overview of the SHOPLED 3FT LED Shop Light, highlighting its features.
Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury to persons, please observe the following:
- Ensure the power supply is disconnected before installation, maintenance, or cleaning.
- This product is intended for indoor use only. Do not expose to water or moisture.
- Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
- Installation should be performed by a qualified electrician if hardwiring is required.
- Ensure the mounting surface can support the weight of the fixture(s).
- Do not look directly into the LED light source when illuminated, as it may cause eye strain.
Package Contents
Verify that all components are present before beginning installation:
- 4 x LED T8 Fixtures (3FT, 30W)
- 8 x Mounting Clips
- 8 x Screws
- 4 x End Caps
- 4 x Connectors (for direct linking)
- 3 x Connector Cords (23.6 inches each, for linking lights with spacing)
- 4 x Power Cords (59 inches each, with on/off switch)
Image: Visual representation of all items included in the 4-pack SHOPLED LED Shop Light package.
Specifications
| Brand | SHOPLED |
| Model Name | 3FT-6000K (SW-GLB390-01-8) |
| Light Type | LED |
| Wattage | 30 Watts (Power Consumption: 27 Watts) |
| Brightness | 4000 Lumens (Light Output Maximum) |
| Color Temperature | 6000 Kelvin (Cool White) |
| Beam Angle | 270° (V-shaped design) |
| Voltage | 120 Volts (Accepted: 100-240V, 60Hz) |
| Lifespan | Over 50,000 hours |
| Material | Aluminum, Metal, Polycarbonate (PC) |
| Dimensions | 36" (Length) x 1.4" (Width) x 1.3" (Height) |
| Certification | ETL Listed |
| Dimmable | No |
Image: Diagram showing the dimensions of the 3FT LED Shop Light.
Setup and Installation
The SHOPLED LED Shop Light offers flexible installation options, including surface mounting and linkable configurations. Up to 8 units can be linked together.
Mounting Instructions:
- Step 1: Mark and Screw Clips
Determine the desired location for your light fixture. Use the provided mounting clips as a template to mark the screw positions on the wall or ceiling. Securely fasten the clips using the included screws. Ensure clips are aligned straight for proper fixture seating. - Step 2: Attach Light Fixture
Carefully push the LED light fixture into the mounted clips until it snaps securely into place.
Image: Step-by-step visual guide for mounting the LED shop light using clips and screws.
Connection Methods:
The lights can be connected in two primary ways: Plug and Play or Hardwired.
- Plug and Play: Use the provided power cord with a switch to plug directly into a standard 120V outlet.
- Hardwired Connection: For a permanent installation, the fixture can be hardwired into your electrical system. This should be performed by a qualified electrician following local electrical codes.
Image: Illustration showing both the plug-and-play power cord and the hardwire connection option.
Linking Multiple Lights:
You can link up to 8 SHOPLED 3FT LED Shop Lights together to create a continuous lighting system.
- Direct Connection: Use the small connectors to directly link fixtures end-to-end.
- Cable Connection: Use the 23.6-inch connector cords to link fixtures with spacing between them.
Image: Depiction of direct linking and linking with a connector cable between two LED shop lights.
Operating Instructions
Once installed and connected to a power source, operate the light fixture as follows:
- Power On/Off: If using the power cord with a switch, press the switch to turn the light on or off.
- For hardwired installations, use the wall switch or circuit breaker controlling the fixture.
The light provides a consistent 6000K cool white illumination, ideal for task lighting and general area lighting.
Maintenance
The SHOPLED LED Shop Light is designed for long-term, low-maintenance operation.
- Cleaning: Ensure the power is disconnected before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
- Lifespan: The integrated LED chips have a rated lifespan of over 50,000 hours, eliminating the need for frequent bulb replacement.
- Heat Dissipation: The high-strength aluminum housing is designed for excellent heat dissipation, contributing to the long lifespan of the LEDs.
Image: Information graphic detailing the 50,000-hour lifetime, 120V voltage, and 270° beam angle of the integrated LED shop lights.
Troubleshooting
If you encounter issues with your SHOPLED LED Shop Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose connection Faulty switch/fixture | Check power outlet/circuit breaker. Ensure all connections are secure. If hardwired, consult an electrician. If plug-and-play, test with another outlet. If issue persists, contact support. |
| Light flickers | Unstable power supply Loose connection Incompatible dimmer (if applicable) | Ensure stable power. Check connections. This product is not dimmable; do not connect to a dimmer switch. |
| Reduced brightness | Dust accumulation Aging LEDs | Clean the fixture surface. While LEDs have a long lifespan, gradual lumen depreciation is normal over many years of use. |
If troubleshooting steps do not resolve the issue, please refer to the Warranty and Support section.
Warranty and Support
Your SHOPLED LED Shop Light is covered by a 3-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or any product-related inquiries, please contact SHOPLED customer support. Contact information can typically be found on the product packaging or the seller's official website.
Please have your purchase receipt and product model number (SW-GLB390-01-8) available when contacting support.