ECONTROLLY EN3R39S, EN3R39H, RCEC-EN3R39S
Instruction Manual
ECONTROLLY Replacement Remote Control for Sharp TV
Models: EN3R39S, EN3R39H, RCEC-EN3R39S
Product Overview
This manual provides instructions for the ECONTROLLY EN3R39S and EN3R39H replacement remote controls, designed for use with various Sharp TV models. This remote control is a direct replacement and typically requires no programming; simply insert batteries to begin operation.
Image: Front view of the ECONTROLLY EN3R39S / EN3R39H remote control.
Compatible Sharp TV models include, but are not limited to: LC65Q7050U, LC65Q7060U, LC65Q7070U, LC65Q7080U, LC50Q7000U, LC50Q7003CU, LC50Q7020U, LC50Q7030U, LC55Q7070U, LC55Q7080U, LC65Q7000U, LC65Q7003U, LC65Q7020U, LC50Q7050U, LC50Q7060U, LC50Q7070U, LC50Q7080U, LC55Q620U, LC55Q7000U, LC55Q7003U, LC55Q7020U, LC55Q7030U, LC55Q7050U, LC55Q7060U.
Setup Guide
Installing Batteries
The remote control requires two (2) AAA batteries for operation. Batteries are not included with the remote control.
- Locate the battery compartment on the back of the remote control.
- Press down on the latch and slide the battery cover downwards to open.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Image: Angled view of the remote control, illustrating its form factor and potential battery compartment location.
After installing the batteries, the remote control is ready for use with your compatible Sharp TV.
Operating Instructions
Basic Functions
This remote control is designed to function immediately with compatible Sharp TV models without the need for complex programming or code entry. Simply point the remote at your TV and press the desired button.
Button Layout and Functions
Familiarize yourself with the primary buttons and their functions:
| Button Name | Function |
|---|---|
| POWER | Turns the TV On or Off. |
| INPUT | Cycles through available input sources (HDMI, AV, etc.). |
| NUMBER BUTTONS (0-9) | Direct channel selection. |
| VOL +/- | Adjusts the volume level up or down. |
| CH +/- | Changes the channel up or down. |
| MUTE | Mutes or unmutes the TV audio. |
| NAVIGATION (Up/Down/Left/Right/OK) | Navigates menus and confirms selections. |
| BACK | Returns to the previous screen or menu. |
| APPS / HOME | Accesses the Smart TV home screen or app menu. |
| NETFLIX, YouTube, VUDU, etc. | Direct access buttons for popular streaming services. |
| MEDIA CONTROL (Play, Pause, Rewind, Fast Forward) | Controls media playback. |
Maintenance
Proper care and maintenance will extend the life of your remote control.
- Cleaning: Use a soft, dry cloth to wipe the surface of the remote. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive materials.
- Battery Replacement: Replace batteries when the remote's performance degrades or it stops responding. Always replace both batteries at the same time with new ones of the same type (AAA).
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures. If the remote will not be used for an extended period, remove the batteries to prevent leakage.
- Avoid Drops: Protect the remote from physical impact, as drops can damage internal components.
Troubleshooting
If you experience issues with your remote control, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not working at all. | Dead or incorrectly inserted batteries. | Replace batteries with new AAA batteries, ensuring correct polarity (+/-). |
| Remote works intermittently. | Low battery power or obstruction. | Replace batteries. Ensure no objects are blocking the line of sight between the remote and the TV's IR receiver. |
| Specific buttons are unresponsive. | Dirt or debris under the button, or internal damage. | Clean the remote's surface. If the issue persists, the remote may be damaged and require replacement. |
| Remote does not control the TV. | Incompatibility or TV's IR receiver issue. | Verify your TV model is listed as compatible. Ensure the TV's IR receiver is not blocked or damaged. Try restarting the TV by unplugging it for a few minutes. |
Product Specifications
| Specification | Detail |
|---|---|
| Model Numbers | EN3R39S, EN3R39H, RCEC-EN3R39S |
| Brand | ECONTROLLY |
| Product Dimensions | 7 x 2 x 0.65 inches (approximately) |
| Item Weight | 1 ounce (approximately) |
| Batteries Required | 2 x AAA batteries (not included) |
| Connectivity Technology | Infrared (IR) |
| Compatible Devices | Sharp Televisions (specific models listed in Product Overview) |
Warranty and Support
For information regarding warranty coverage or technical support for your ECONTROLLY remote control, please refer to the documentation provided with your purchase or contact the seller directly. As this is a replacement part, warranty terms may vary.
For further assistance, you may also visit the ECONTROLLY brand page or contact their customer service channels if available.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.