Gillette Fusion Styler Men's Waterproof Hair Trimmer 3-in-1 Instruction Manual

Introduction and Overview

The Gillette Fusion Styler 3-in-1 is a versatile grooming tool designed for men to trim, shave, and sculpt facial hair with precision and ease. Its waterproof design allows for convenient use in the shower, offering flexibility in your grooming routine. This manual provides detailed instructions to help you get the most out of your styler.

Product Components

Your Gillette Fusion Styler 3-in-1 package includes the following items:

• Gillette Fusion Styler Unit (Trimmer Handle)
• Three (3) Interchangeable Trimmer Combs (2mm, 4mm, 6mm)
• One (1) Gillette ProGlide Razor Blade Cartridge with Holder
• One (1) AA Battery (pre-installed)

Image: The Gillette Fusion Styler unit, showing the main trimmer, three blue comb attachments (2mm, 4mm, 6mm), and a blue razor attachment with a green blade.

Setup

1. Battery Installation

The Gillette Fusion Styler operates on one (1) AA battery, which is typically included and pre-installed. To access or replace the battery:

1. Gently twist the bottom cap of the styler unit counter-clockwise to remove it.
2. Insert or replace the AA battery, ensuring the positive (+) and negative (-) ends align correctly with the indicators inside the compartment.
3. Replace the bottom cap by twisting it clockwise until secure.

2. Attaching Trimmer Combs and Razor Attachment

The styler features an easy-to-use attachment system for seamless transitions between trimming and shaving.

Attaching Trimmer Combs:

1. Select the desired comb length (2mm, 4mm, or 6mm) for your trimming needs.
2. Align the comb with the trimmer head and gently push it down until it clicks securely into place.
3. To remove, press the release button (if present, or gently pull upwards) and slide the comb off.

Attaching Razor Attachment:

1. Align the Gillette ProGlide razor attachment with the top of the styler unit.
2. Push the attachment firmly onto the styler until it clicks into place.
3. To remove, press the release button (usually located on the side or back of the attachment) and pull the razor attachment away from the styler.

Operating Instructions

The Gillette Fusion Styler is designed for both wet and dry use, offering flexibility for your grooming routine. It is waterproof and can be used in the shower.

1. Powering On/Off

Press the power button located on the front of the styler unit to turn it on or off.

2. Trimming

For an even trim, attach one of the three comb lengths (2mm, 4mm, or 6mm).

1. Ensure the desired comb is securely attached.
2. Turn on the styler.
3. Move the trimmer against the direction of hair growth for optimal results.
4. Use smooth, even strokes.

3. Shaving

For a close and comfortable shave, use the Gillette ProGlide razor attachment.

1. Ensure the razor attachment is securely connected to the styler unit.
2. Apply shaving gel or foam to the area to be shaved.
3. Shave with light, gentle strokes, rinsing the blade frequently.

4. Defining and Edging

The precision trimmer on the styler unit (without any comb attached) and the precision blade on the back of the ProGlide razor cartridge are ideal for defining sharp lines and edges.

1. For the trimmer: Remove any comb attachment. Use the exposed trimmer blade to create clean lines around your beard, mustache, or sideburns.
2. For the ProGlide precision blade: Flip the razor to use the single blade on the back of the cartridge for intricate detailing and sharp edges.

Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the life of your Gillette Fusion Styler.

1. Cleaning the Trimmer Head and Combs

The styler is waterproof, allowing for easy cleaning under running water.

1. After each use, turn off the styler.
2. Remove any attached comb or razor cartridge.
3. Rinse the trimmer head and the comb attachments thoroughly under warm running water to remove hair and debris.
4. For stubborn hair buildup in the trimmer blades, use a small brush (like an old toothbrush) to gently dislodge the hair.
5. Allow all parts to air dry completely before reassembling or storing.

2. Cleaning the Razor Cartridge

Rinse the Gillette ProGlide razor cartridge thoroughly under running water after each stroke during shaving, and after completing your shave.

3. Battery Care

If the styler will not be used for an extended period, it is recommended to remove the AA battery to prevent potential leakage and damage to the device.

Troubleshooting

Specifications

• Model Number: 81695119
• Power Source: 1 x AA Battery (included)
• Features: Waterproof, 3-in-1 (Trimmer, Shaver, Edger), Precision Trimmer, 3 Comb Lengths (2mm, 4mm, 6mm)
• Dimensions: 5.35 x 11.46 x 1.18 inches
• Weight: 3.92 ounces
• Manufacturer: Procter & Gamble

Safety Information

For safe and optimal use of your Gillette Fusion Styler, please observe the following precautions:

• Do not immerse the device fully in water for extended periods, despite its waterproof design.
• Do not use the device while it is charging (if applicable, though this model is battery-powered).
• Clean and maintain the shaver regularly to prevent bacterial growth and ensure hygienic use.
• Always follow the provided instructions in this user manual for proper operation and care.
• Keep out of reach of children.
• Avoid dropping the device, as this may cause damage.

Warranty and Support

For warranty information, product support, or to purchase replacement parts and accessories, please visit the official Gillette website or contact Gillette customer service. Retain your proof of purchase for warranty claims.

For additional information, you may visit the Gillette Store on Amazon.