Product Overview
The Yardworks 5/8 inch x 10 foot garden hose is designed for various garden and lawn care applications. This medium-duty hose features a robust construction to ensure durability and reliable performance.
Key Features:
- 4-Ply Construction: Includes one inner core, one nylon reinforcement layer, and two scuff-resistant outer jackets for enhanced durability.
- Medium Burst Strength: Capable of handling water pressure up to 300 PSI.
- Brass Couplings: Equipped with durable brass couplings for secure connections.
- Versatile Use: Ideal for connecting a hose reel to a spigot, and suitable for general watering tasks.
Image: The Yardworks 10-foot extension hose, coiled for display, showcasing its green and beige striped exterior and brass couplings at each end. The product label is visible, indicating it is an "EXTENSION HOSE" ideal for connecting to a spigot.
Setup
Follow these steps to set up your Yardworks garden hose:
- Uncoil the Hose: Carefully uncoil the entire length of the hose to prevent kinks.
- Connect to Water Source: Attach one end of the hose, with its brass coupling, securely to your outdoor spigot or water faucet. Ensure the connection is hand-tight to prevent leaks.
- Connect to Accessory (Optional): If using with a hose reel, connect the other end of the hose to the hose reel's inlet. If connecting to another hose or watering accessory (e.g., nozzle, sprinkler), attach it to the remaining brass coupling.
- Check for Leaks: Slowly turn on the water supply and inspect all connections for any leaks. Tighten connections as necessary.
Operating Instructions
The Yardworks garden hose is straightforward to operate:
- Water Flow: Turn on the water supply at the spigot to begin water flow through the hose.
- Watering: Direct the water flow as needed for your gardening or cleaning tasks.
- Shut-off: When finished, turn off the water supply at the spigot.
- Drainage: After turning off the water, it is recommended to drain any remaining water from the hose by holding the open end downwards or by using a nozzle with a shut-off valve. This helps prolong the hose's life, especially in colder climates.
Maintenance
Proper maintenance will extend the life of your Yardworks garden hose:
- Cleaning: Periodically clean the exterior of the hose with mild soap and water to remove dirt and debris.
- Storage: Store the hose in a cool, dry place away from direct sunlight when not in use. Coiling the hose neatly on a hose reel or hanger will prevent kinks and tangles.
- Winterization: In freezing temperatures, ensure all water is drained from the hose before storage to prevent ice expansion from damaging the hose or couplings.
- Inspect Couplings: Regularly check the brass couplings for any signs of wear, corrosion, or damage. Replace washers if necessary to prevent leaks.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage at Connection | Loose connection; Worn washer; Damaged coupling. | Tighten the connection; Replace the rubber washer inside the coupling; Inspect coupling for damage and replace hose if necessary. |
| Low Water Pressure | Kink in hose; Partially closed spigot; Obstruction in hose. | Straighten any kinks; Fully open the spigot; Flush the hose to remove any debris. |
| Hose Kinks Easily | Improper storage; Hose twisted during use. | Store hose coiled or on a reel; Uncoil and straighten hose before use. |
Specifications
- Model Number: 1500
- Hose Diameter: 5/8 inch
- Hose Length: 10 feet
- Material: Vinyl (Outer Jackets), Nylon (Reinforcement), Brass (Couplings)
- Construction: 4-Ply (Inner Core, Nylon Reinforcement, Two Scuff-Resistant Outer Jackets)
- Max Water Pressure: 300 PSI (Burst Strength)
- Color: Green
- Item Weight: 540 g
- UPC: 707634102000
- Manufacturer: Yardworks
- Origin: Made in USA
Important Notes
THIS ITEM CANNOT BE SHIPPED TO CALIFORNIA.
Warranty and Support
For warranty information or technical support regarding your Yardworks 5/8 inch x 10 ft Leader Extension Medium Duty Garden Hose, please refer to the product packaging or contact Yardworks customer service directly. Contact details are typically provided on the product's official website or included documentation.
