1. Product Overview
The SHOPLED 3FT LED Shop Light is a high-efficiency lighting solution designed for various indoor applications such as workshops, garages, basements, and commercial spaces. This fixture features a V-shape design with double-row LED chips, providing a 270° beam angle for broad illumination. It offers 30W power, 4000 lumens of brightness, and a 5000K daylight white color temperature. The lights are linkable, allowing for flexible installation and expanded coverage.
Image 1.1: Overview of the SHOPLED 3FT LED Shop Light.
Image 1.2: Key features including 30W, 4000LM, 5000K, and long lifespan.
2. Important Safety Information
Please read all instructions carefully before installation and use. Retain this manual for future reference.
- Electrical Safety: Always disconnect power at the circuit breaker before installing or servicing the fixture. Ensure proper grounding to prevent electrical shock.
- Installation: Installation should be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved.
- Voltage: Ensure the supply voltage is compatible with the fixture's requirements (120 Volts).
- Indoor Use Only: This product is designed for indoor use only. Do not expose to water or damp conditions.
- Mounting: Mount the fixture securely to a stable surface. Do not exceed the maximum number of linkable lights (up to 8 units).
- Heat: Although LED lights produce minimal heat, ensure adequate ventilation around the fixture.
- Damage: Do not operate the fixture if it is damaged. Contact customer support for assistance.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
Image 3.1: Included accessories for installation and linking.
- LED Tube Light (4 pieces)
- 59-inch Switch Cords (2 pieces)
- 11.8-inch Connectors (3 pieces)
- Rubber Plugs (8 pieces)
- Screws (8 pieces)
- Mounting Clips (8 pieces)
- 9.8-inch Power Cords (2 pieces, for hardwiring)
4. Product Specifications
| Feature | Specification |
|---|---|
| Brand | SHOPLED |
| Model Name | 3FT-5000K |
| Item Model Number | SW-GLB390-01-9 |
| Dimensions | 36"L x 2"W x 1"H |
| Wattage | 30 Watts |
| Brightness | 4000 Lumens |
| Color Temperature | 5000 Kelvin (Daylight White) |
| Beam Angle | 270 Degrees |
| Voltage | 120 Volts |
| Material | Acrylonitrile Butadiene Styrene, Aluminum |
| Light Source Type | LED |
| Lifespan | Over 50,000 hours |
| Special Features | Corded, Plug and Play, Linkable |
| Certification | ETL Listed |
Image 4.1: Detail of the T8 integrated base and 270° beam angle.
5. Installation Instructions
5.1 Mounting the Fixtures
The LED shop lights can be mounted directly to a surface using the provided mounting clips and screws.
- Step 1: Determine the desired mounting location. Use the mounting clips as a template to mark the screw positions on the wall or ceiling.
- Step 2: Drill pilot holes at the marked positions. Insert the rubber plugs into the pilot holes if mounting into drywall or similar material.
- Step 3: Screw the mounting clips securely into place using the provided screws.
- Step 4: Align the LED light fixture with the installed clips and push the light firmly into the clips until it snaps into place. Ensure the fixture is securely held.
Image 5.1: Visual guide for mounting the light fixture.
5.2 Wiring Options
The SHOPLED fixtures offer two wiring methods: Plug and Play or Hardwired Connection.
- Plug and Play: Connect the 59-inch switch cord to one end of the LED fixture. Plug the cord into a standard 120V wall outlet. Use the inline switch to turn the light on and off.
- Hardwired Connection: For a permanent installation, use the provided 9.8-inch power cord to hardwire the fixture to a junction box. A qualified electrician should perform this connection. The yellow wire is for ground.
Image 5.2: Demonstrates both plug-and-play and hardwire connection methods.
5.3 Linking Multiple Lights
Multiple SHOPLED fixtures can be linked together to create a continuous lighting system. You can connect up to 8 lights in a single run.
- Direct Connection: For a seamless look, connect fixtures directly end-to-end using the integrated connectors.
- Cable Connection: Use the 11.8-inch connector cables to link fixtures with a small gap between them, offering more flexibility in layout.
Image 5.3: Illustrates direct and cable linking methods for multiple fixtures.
6. Operating Instructions
Operating the SHOPLED 3FT LED Shop Light is straightforward:
- Power On/Off: If using the plug-and-play method, use the inline switch on the power cord to turn the light fixture(s) on or off.
- Linked Systems: When multiple lights are linked, turning on the first light in the series will illuminate all connected lights.
- Hardwired Systems: For hardwired installations, the light will operate via the wall switch or circuit it is connected to.
7. Maintenance
The SHOPLED 3FT LED Shop Light requires minimal maintenance:
- Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
- No User-Serviceable Parts: The LED chips are integrated and not replaceable by the user. Do not attempt to open or repair the fixture.
- Inspection: Periodically inspect the fixture and wiring for any signs of damage or wear. If damage is found, discontinue use and contact customer support.
8. Troubleshooting
If you encounter issues with your SHOPLED 3FT LED Shop Light, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose connection Faulty switch/outlet | Check if the power cord is securely plugged in. Verify the wall outlet or circuit breaker is functioning. Ensure all linking cables are firmly connected. Test the switch. |
| Light flickers | Unstable power supply Loose connection | Ensure the power source is stable. Check all connections, including direct links and cable connectors, for tightness. |
| Only some linked lights work | Loose connection between fixtures Exceeded maximum linked units | Check the connections between the non-working lights and the previous working light. Ensure you have not linked more than 8 fixtures in a single run. |
| Light is dim | Dust accumulation Incorrect power supply | Clean the fixture gently. Verify the power supply voltage is 120V. |
If troubleshooting steps do not resolve the issue, please contact SHOPLED customer support.
9. Warranty and Customer Support
SHOPLED stands behind the quality of its products.
- Warranty: This product comes with a 3-year warranty from the date of purchase, covering manufacturing defects and material flaws.
- Support: For any questions, concerns, or assistance with installation, operation, or warranty claims, please contact SHOPLED customer support. Support is available before and after purchase.
Please have your model number (SW-GLB390-01-9) and purchase information ready when contacting support.