VSDISPLAY VS104T-003A

Download PDF
Contents

VSDISPLAY 10.4" VS104T-003A IPS LCD Display and Controller Board User Manual

Model: VS104T-003A

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your VSDISPLAY 10.4-inch VS104T-003A IPS LCD Display with its accompanying H/D Controller Board. Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent damage to the components.

2. Package Contents

Please verify that all items listed below are included in your package. If any items are missing or damaged, please contact your vendor.

  • 1 × Audio LCD Controller Board
  • 1 × 10.4-inch VS104T-003A 1024x768 IPS LCD Screen
  • 1 × LVDS Cable
  • 1 × Inverter Board
  • 1 × Keyboard with Cable

Note: A power adapter is not included in the packing list and must be purchased separately.

3. Product Overview

This section provides a visual guide to the components included in your kit.

3.1 LCD Controller Board

The controller board manages video input signals and outputs to the LCD panel. It features various ports for connectivity.

VSDISPLAY LCD Controller Board with labeled ports

Image 1: Top view of the LCD Controller Board with all ports clearly labeled, including LVDS Interface, Speaker, Inverter, Keyboard, Power Supply, HD (HDMI), and Headset connections.

VSDISPLAY LCD Controller Board front and back views

Image 2: Front and back views of the LCD Controller Board, showing the component layout on both sides and the LVDS interface connector on the reverse.

VSDISPLAY LCD Controller Board dimensions

Image 3: Dimensions of the LCD Controller Board, measuring approximately 85mm in length and 54mm in width.

3.2 10.4-inch IPS LCD Screen

The 10.4-inch IPS LCD screen provides a 1024x768 resolution display with wide viewing angles.

VSDISPLAY 10.4 inch LCD screen dimensions and kit contents

Image 4: The 10.4-inch LCD screen with its dimensions (225mm x 174mm) indicated. Below, a visual representation of the complete shipping list, including the controller board, LCD, cables, inverter, and keyboard.

4. Setup Instructions

Follow these steps to correctly assemble and connect your LCD display kit.

VSDISPLAY LCD kit assembly example

Image 5: An example of the fully assembled LCD kit, showing the connections between the LCD panel, controller board, LVDS cable, inverter board, and keyboard.

  1. Connect the LVDS Cable: Carefully connect one end of the LVDS cable to the 30-pin connector on the LCD screen and the other end to the LVDS interface on the controller board. Ensure correct orientation and a secure connection.
  2. Connect the Inverter Board: Connect the inverter board to the backlight connector on the LCD panel. Then, connect the inverter cable to the designated inverter port on the controller board.
  3. Connect the Keyboard: Attach the keyboard cable to the keyboard port on the controller board. This keyboard is used for OSD (On-Screen Display) menu navigation.
  4. Connect Video Input: Connect your video source (e.g., PC, media player) to the HD (HDMI) port on the controller board.
  5. Connect Audio (Optional): If audio is desired, connect your audio source to the audio input port or connect speakers/headphones to the audio output ports (Speaker or Headset).
  6. Connect Power: Connect a 12V DC power adapter (not included, recommended 12Vdc, more than 2A) to the power supply input port on the controller board.
  7. Power On: Once all connections are secure, plug in the power adapter to an electrical outlet. The display should power on and show the input signal.

Caution: Ensure all connections are made while the power adapter is disconnected to prevent damage to the components.

5. Operating Instructions

The controller board features an On-Screen Display (OSD) menu for adjusting display settings.

5.1 OSD Menu Navigation

Use the provided keyboard with cable to navigate the OSD menu:

  • Menu Button: Press to open the OSD menu.
  • Up/Down Buttons: Navigate through menu options.
  • Left/Right Buttons: Adjust values or select sub-menus.
  • Exit Button: Close the OSD menu.

5.2 Available Settings

Common settings accessible via the OSD menu include:

  • Brightness
  • Contrast
  • Auto Adjustment (for analog signals)
  • Language (English, French, German, Spanish, Italian, etc.)
  • Input Source Selection
  • Aspect Ratio

5.3 Audio Output

The controller board supports audio output through a speaker connector and a 3.5mm earphone jack. Ensure your audio source is connected to the board's audio input if you wish to use these features.

6. Specifications

6.1 10.4" VS104T-003A LCD Screen

FeatureSpecification
Display ModeIPS, Normally Black, Transmissive
Resolution1024(RGB)×768 (XGA)
Outline Size225.8 × 174.3 × 5.6 mm (H×V×D)
Display Area211.2 × 158.48 mm (H×V)
Brightness500 cd/m² (Typ.)
Contrast Ratio700:1 (Typ.)
Viewing Angle85/85/85/85 (Typ.) (CR≥10) [Left / Right / Up / Down]
Signal InterfaceLVDS (1 ch, 6/8-bit), Connector, 30 pins
BacklightWLED
Input Voltage3.3V (Typ.)

6.2 LCD Controller Board

FeatureSpecification
Input Power Adapter12Vdc, More than 2A
Standby Model<1W (when no input signal)
Video InputHD (HDMI) Version 1.1
Audio InputSupported
Audio OutputSpeaker (Max 8Ω 2W), Earphone (3.5mm)
OSD FunctionsBrightness, Contrast, Auto, Language, etc.
OSD LanguagesEnglish, French, German, Spanish, Italian, etc.
Board Size85mm x 54mm x 14mm

7. Troubleshooting

If you encounter issues with your display kit, refer to the following common problems and solutions.

  • No Display / Black Screen:
    • Ensure the 12V DC power adapter is correctly connected and providing power.
    • Check all cable connections (LVDS, inverter, video input) for proper seating.
    • Verify that your video source is powered on and outputting a signal.
    • Try a different video input cable or source to rule out cable/source issues.
  • No Audio:
    • Ensure your audio source is connected to the controller board's audio input.
    • Check speaker/headphone connections.
    • Verify audio settings in your video source and the OSD menu.
  • OSD Menu Not Responding:
    • Ensure the keyboard cable is securely connected to the controller board.
    • Check for any physical damage to the keyboard or cable.
  • Image Quality Issues (Flickering, Distorted Colors):
    • Check the LVDS cable connection for any loose pins or damage.
    • Ensure the video input cable is not damaged and is securely connected.
    • Adjust brightness, contrast, and other display settings via the OSD menu.

8. Maintenance

Proper care and maintenance will extend the lifespan of your VSDISPLAY kit.

  • Cleaning the Screen: Use a soft, lint-free cloth lightly dampened with water or a non-abrasive screen cleaner. Do not use alcohol, ammonia, or abrasive cleaners, as they can damage the screen surface.
  • Cleaning the Controller Board: Ensure the board is powered off and disconnected. Use a soft brush or compressed air to remove dust. Avoid using liquids directly on the board.
  • Storage: When not in use for extended periods, store the components in a cool, dry place away from direct sunlight and extreme temperatures.
  • Environmental Conditions: Avoid exposing the components to high humidity, dust, or corrosive environments.

9. Warranty and Support

VSDISPLAY products are designed for reliability. For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your reseller. You may also visit the official VSDISPLAY website for further assistance.

Please retain your proof of purchase for warranty claims.

© 2023 VSDISPLAY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.