1. Product Overview
The Sanus Premium Series Swivel TV Wall Mount (Model BLF328-B1) is designed to securely hold most 42" - 90" televisions, supporting up to 125 lbs. Its full-motion articulating arm allows for a wide range of swivel and tilt adjustments, providing optimal viewing angles from various positions in a room. Constructed from durable brushed metal, this mount offers both stability and a sleek appearance.
Key Features:
- Compatible with most 42" - 90" TVs.
- Supports TVs up to 125 lbs for sturdy and reliable support.
- Constructed from brushed metal for durability and a modern aesthetic.
- Offers extensive swivel and tilt adjustments for customized viewing angles.
- Designed for easy installation with a clean, hidden screw appearance.
Figure 1.1: Front view of the Sanus BLF328-B1 TV Wall Mount, showcasing its robust design.
2. Safety Information
Please read and understand all instructions before installation and use. If you have any questions, contact Sanus customer support. Improper installation can result in serious injury or damage to your TV and property.
- Weight Capacity: Do not exceed the maximum weight capacity of 125 lbs (56.7 kg). This mount is intended for use only with the maximum weights indicated.
- TV Size: Ensure your TV's VESA pattern and size (42" - 90") are compatible with this mount.
- Wall Structure: This mount is designed for installation into wood studs or solid concrete/brick walls. Do not install into drywall alone. Always use a stud finder to locate the center of wood studs.
- Professional Installation: If you are unsure about the installation process or the suitability of your wall, consult a qualified professional installer.
- Personal Injury: Always use appropriate safety gear, including eye protection, during installation.
- Children: Keep children and pets away during installation.
3. Parts List
Before beginning installation, verify that all parts are present and undamaged. Refer to the included hardware bag for specific fastener sizes and quantities.
- Wall Plate Assembly (main mounting unit)
- TV Brackets (attach to the back of the TV)
- Articulating Arm Assembly (connects wall plate to TV brackets)
- Wall Mounting Hardware (lag bolts, washers, concrete anchors if applicable)
- TV Mounting Hardware (various screws, spacers, washers for different TV models)
- Cable Management Clips/Ties
- Installation Template (paper template for drilling holes)
Figure 3.1: Rear view of the Sanus BLF328-B1 TV Wall Mount, showing the articulating arm and mounting points.
4. Setup and Installation
This section provides a general overview of the installation steps. Always refer to the detailed installation guide included in your product packaging for precise instructions and diagrams.
4.1 Pre-Installation Checks
- Determine the desired TV height and position on the wall.
- Locate wall studs using a reliable stud finder. Mark the center of the studs.
- Verify that the wall area is free of electrical wires, plumbing, or other obstructions.
- Gather necessary tools: drill, level, tape measure, pencil, stud finder, socket wrench, Phillips head screwdriver.
4.2 Mounting the Wall Plate
- Position the wall plate template on the wall at the desired height and level it.
- Drill pilot holes at the marked locations, ensuring they are centered on the studs.
- Secure the wall plate assembly to the wall using the provided lag bolts and washers. Tighten securely, but do not overtighten.
Figure 4.1: The TV wall mount extended from the wall, demonstrating its full-motion capability.
4.3 Attaching TV Brackets to TV
- Carefully place your TV face down on a soft, clean surface.
- Identify the correct size screws and spacers from the hardware kit that fit your TV's VESA mounting holes.
- Attach the TV brackets to the back of your TV, ensuring they are centered and securely fastened.
4.4 Mounting TV to Wall Plate
- With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate.
- Engage any safety locks or screws to secure the TV to the mount, preventing accidental dislodgement.
- Perform a final check to ensure the TV is level and securely attached.
Figure 4.2: A person carefully lifting and attaching a television to the installed wall mount.
5. Operating the Mount
The Sanus BLF328-B1 mount offers flexible positioning for your television.
5.1 Swivel Adjustment
Gently grasp the sides of your television and pivot it left or right to achieve the desired viewing angle. The articulating arm allows for a wide range of horizontal movement.
Figure 5.1: A television mounted on the Sanus BLF328-B1, swiveled to an angled viewing position.
5.2 Tilt Adjustment
To adjust the vertical tilt, gently push the top or bottom of the TV forward or backward. Some models may have knobs or levers on the TV brackets that need to be loosened before tilting and tightened afterward to secure the angle.
5.3 Retracting the Mount
To push the TV closer to the wall, gently guide the TV back towards the wall until the articulating arm is fully collapsed. Ensure no cables are pinched during this process.
Figure 5.2: A television mounted on the Sanus BLF328-B1, fully retracted and close to the wall for a low-profile look.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your TV wall mount.
- Cleaning: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Periodic Checks: Every 6-12 months, inspect all screws and bolts to ensure they remain tight. Do not overtighten.
- Movement: If the mount's movement becomes stiff, check for any obstructions. Do not apply lubricants unless specifically recommended by Sanus.
7. Troubleshooting
If you encounter issues with your Sanus BLF328-B1 mount, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Mount is not level. | Wall plate not installed level. | Loosen wall plate bolts slightly, adjust with a level, and re-tighten. Ensure pilot holes were drilled accurately. |
| Difficulty swiveling/tilting. | Friction adjustments too tight; cables interfering. | Check the mount's manual for specific friction adjustment points. Ensure cables are properly managed and not obstructing movement. |
| TV feels unstable on mount. | TV not properly seated; safety locks not engaged; bolts loose. | Ensure TV brackets are fully engaged with the wall plate. Verify all safety locks are secured. Check and tighten all mounting bolts. |
| Missing parts. | Packaging error. | Contact Sanus customer support immediately with your model number and purchase information. |
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | Sanus |
| Model Number | BLF328-B1 |
| Compatible TV Sizes | 42" - 90" |
| Maximum Weight Capacity | 125 lbs (56.7 kg) |
| Material | Brushed Metal |
| Movement Type | Articulating / Full-Motion |
| Mounting Type | Wall Mount |
| Product Dimensions | 7.62 x 66.8 x 50.8 cm (approx. 3 x 26.3 x 20 inches) |
| Item Weight | 14.11 kg (approx. 31.1 lbs) |
| Maximum Tilt Angle | 15 Degrees |
9. Warranty Information
Sanus products are designed and manufactured to the highest quality standards. This product is backed by a manufacturer's warranty. For specific details regarding the warranty period and terms, please refer to the warranty card included with your product or visit the official Sanus website.
10. Customer Support
If you require further assistance, have questions about installation, or need to report a missing/damaged part, please contact Sanus customer support. Have your product model number (BLF328-B1) and purchase information ready when you call or email.
For the most up-to-date contact information, please visit the official Sanus website: www.sanus.com
