Degrees of Comfort Electric Blanket User Manual

1. Introduction

Thank you for choosing the Degrees of Comfort Electric Blanket. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your electric blanket. Please read all instructions carefully before use and retain this manual for future reference.

Safety First

Your Degrees of Comfort electric blanket is UL Certified, specifically engineered to release the lowest possible EMF emissions while providing warm comfort. Always prioritize safety by following all instructions.

Image: Internal structure highlighting safety features like the resin detection layer for overheating prevention and temperature detection line.

2. Setup Instructions

Connecting the Controller

Place the electric blanket flat on your bed. Locate the connector on the blanket and the corresponding plug on the controller cord. Firmly push the controller plug into the blanket connector until it clicks securely into place. Ensure the connection is tight to prevent malfunction.

Route the power cord from the controller to a nearby electrical outlet. The 12.5ft long power cord provides ample length for convenient placement. For dual control models (Queen, King, California King), repeat this process for the second controller.

Image: Electric blanket properly positioned on a bed with the controller ready for use.

3. Operating Instructions

Powering On/Off

Plug the power cord into a standard electrical outlet. Press the power button on the LCD display control to turn the blanket on or off.

Adjusting Heat Settings

Your blanket features 6 different heating levels. Use the up and down arrow buttons on the controller to select your desired warmth level. The selected setting will be displayed on the LCD screen.

For Queen, King, and California King sizes, dual controllers are provided, allowing individual heat settings for each side of the bed.

Pre-Heat Function

Activate the pre-heat function to quickly warm your bed before use. Refer to your controller's specific buttons for this feature.

Auto Shut-Off

The blanket includes an auto shut-off feature with 1-10 hour time modes for safety and energy efficiency. Set the desired operating duration using the controller. The blanket will automatically turn off after the set time has elapsed.

Image: Detailed view of the intelligent controller, showing its various functions and display.

4. Care and Maintenance

Washing Instructions

To clean your electric blanket, first disconnect the controller(s) and power cables from the blanket. Place the blanket in a washing machine.

• Use cold or lukewarm water only.
• Select a slow agitation cycle.
• Use an all-purpose cleaning detergent. Do not use bleach or other harsh fluids.

After washing, move the blanket to the dryer on low heat or allow it to air dry completely. The blanket is tested to stay soft and plush after multiple washes.

Image: Proper method for washing the electric blanket, emphasizing the removal of the control panel.

5. Troubleshooting

Common Issues and Solutions

• Blanket Not Heating: Ensure the power cord is securely plugged into both the blanket and a functional electrical outlet. Check if the controller is powered on and a heat setting is selected.
• Error Codes on Controller: If an error code appears on the LCD display, try unplugging the blanket from the wall outlet for a few minutes, then plug it back in. If the error persists, contact customer support.
• Uneven Heating or Cold Spots: Ensure the blanket is spread flat on the bed without excessive folds or bunching, which can interfere with heat distribution.
• Blanket Sliding Off Bed: While designed for comfort, ensure the blanket is properly positioned under your top sheet or comforter to minimize movement during sleep.

6. Product Specifications

7. Warranty and Support

Degrees of Comfort is committed to your satisfaction. If at any time you experience an issue with your electric blanket, please do not hesitate to contact our customer service team.

For support, please refer to the contact information provided with your product packaging or visit the official Degrees of Comfort website. Our team is ready to assist you with any questions or concerns.