Arcchio 9624208

Download PDF
Contents

Arcchio Brenda LED Panel User Manual

Model: 9624208

1. Important Safety Information

Please read these instructions carefully before installation and use. Keep this manual for future reference.

  • Electrical Safety: Installation should only be performed by a qualified electrician in accordance with local wiring regulations. Ensure the main power supply is switched off before installation or maintenance.
  • Indoor Use Only: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not use in damp environments or outdoors.
  • Handling: Handle the LED panel with care to avoid damage. Do not apply excessive force.
  • Cleaning: Disconnect power before cleaning. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Light Source: The LED light source is not replaceable. If the light source reaches its end of life, the entire luminaire shall be replaced.

2. Package Contents

Verify that all components are present and undamaged before proceeding with installation.

  • Arcchio Brenda LED Panel
  • Remote Control
  • Mounting Hardware (screws, anchors, brackets)
  • Instruction Manual

3. Setup and Installation

This LED panel is designed for ceiling mounting. Ensure the mounting surface is suitable to support the weight of the fixture (approximately 7.9 kg).

  1. Prepare for Installation: Turn off the main power supply at the circuit breaker before beginning any electrical work.
  2. Mounting Bracket: Secure the mounting bracket to the ceiling using appropriate screws and anchors. Ensure it is firmly attached.
  3. Electrical Connection: Connect the electrical wires from the ceiling to the terminal block on the LED panel. Ensure correct polarity (Live, Neutral, Earth).
  4. Attach Panel: Carefully lift the LED panel and attach it to the mounting bracket. Secure it in place according to the specific design of the bracket.
  5. Final Check: Once installed, ensure all connections are secure and the panel is stable. Restore power at the circuit breaker.
Rear view of Arcchio Brenda LED panel showing internal wiring and mounting components

Image: Rear view of the LED panel with its internal components and mounting hardware. This shows the electrical connections and how the panel is assembled for installation.

4. Operating Instructions

The Arcchio Brenda LED Panel is controlled using the included remote control.

Remote Control Functions:

Arcchio Brenda LED panel remote control with various buttons for power, dimming, CCT, RGB, flash, smooth, and fade functions.

Image: The remote control for the Arcchio Brenda LED panel, featuring buttons for power, dimming, color temperature adjustment (CCT), RGB color selection, and special effects like flash, smooth, and fade.

  • Power On/Off: Press the Power button to turn the light on or off.
  • Dimming: Use the DIM+ and DIM- buttons to adjust the brightness level of the light.
  • Color Temperature (CCT) Adjustment: The CCT function allows you to change the white light color from warm white (3000K) to cool white (6000K). Use the dedicated CCT buttons (often represented by sun/snowflake icons or color temperature ranges) to cycle through or select desired temperatures.
  • RGB Backlighting: The panel features RGB LEDs on the back to create ambient lighting effects. Use the RGB/W button or color selection buttons to choose different colors.
  • Night Light Function: Activate the night light mode for a very low brightness setting, suitable for subtle illumination.
  • Special Effects: Buttons like FLASH, SMOOTH, and FADE control dynamic lighting modes for the RGB backlighting.
Collage of Arcchio Brenda LED panel displaying various white light color temperatures from warm to cool.

Image: A collage demonstrating the CCT function, showing the Arcchio Brenda LED panel emitting different shades of white light, from warm (yellowish) to cool (bluish).

Collage of Arcchio Brenda LED panel displaying various RGB backlighting colors like red, blue, green, and purple.

Image: A collage illustrating the RGB backlighting feature, with the Arcchio Brenda LED panel casting different colored glows onto the ceiling, including red, blue, green, and purple.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your LED panel.

  • Cleaning: Before cleaning, ensure the power supply to the fixture is disconnected. Wipe the surface of the LED panel with a soft, dry, or slightly damp cloth. Do not use chemical cleaners, abrasive materials, or sprays, as these can damage the finish or electrical components.
  • Inspection: Periodically check for any loose connections or visible damage. If any issues are found, disconnect power and consult a qualified electrician.

6. Troubleshooting

If you encounter problems with your Arcchio Brenda LED Panel, refer to the following common issues and solutions:

ProblemPossible CauseSolution
Light does not turn on.No power supply.
Loose wiring connection.
Remote control battery depleted.
Check the circuit breaker.
Ensure all wires are securely connected (consult an electrician).
Replace the remote control battery.
Remote control not working.Battery depleted.
Obstruction between remote and panel.
Remote not paired (if applicable).
Replace the battery.
Ensure a clear line of sight.
Refer to pairing instructions (if provided separately).
Light flickers or dims unexpectedly.Unstable power supply.
Faulty wiring.
Product malfunction.
Consult an electrician to check power supply stability.
Have wiring inspected by an electrician.
Contact customer support if other solutions fail.

If the problem persists after attempting these solutions, please contact Arcchio customer support or a qualified electrician.

7. Specifications

Detailed technical specifications for the Arcchio Brenda LED Panel.

  • Model Number: 9624208
  • Dimensions (L x W x H): 119.5 cm x 59.5 cm x 5.5 cm
  • Weight: 7.9 kg
  • Material: Aluminum, Zinc
  • Color: White
  • Light Source: Integrated LED
  • Total Wattage: 75 W
  • Voltage: 230 V
  • Ingress Protection (IP) Rating: IP20
  • Protection Class: I
  • Color Rendering Index (CRI): 80.00
  • Color Temperature: 3000K - 6000K (CCT adjustable) + RGB backlighting
  • Control Method: Remote Controlled
  • Mounting Type: Ceiling Mount
Arcchio Brenda LED panel with dimensions 1195mm length and 595mm width indicated.

Image: The Arcchio Brenda LED panel with its primary dimensions clearly marked: 1195mm in length and 595mm in width.

EU Energy Label for Prios L9002024, showing energy efficiency class F and 76 kWh/1000h consumption.

Image: EU Energy Label for the LED panel, indicating an energy efficiency class F and an energy consumption of 76 kWh per 1000 hours. For more details, visit the official EPREL database: https://eprel.ec.europa.eu/qr/741817

8. Warranty and Support

For warranty information, please refer to the terms and conditions provided at the point of purchase or contact your retailer. For technical support or inquiries, please reach out to Arcchio customer service or the manufacturer, Lampenwelt.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.