Real HD PC130T DS-1273ZJ-130-TRL Wall Mount Bracket Instruction Manual

Introduction

This instruction manual provides detailed guidance for the installation and use of the Real HD PC130T DS-1273ZJ-130-TRL Wall Mount Bracket. This bracket is designed to securely mount compatible turret-style CCTV cameras, offering protection for connection cables and ensuring a clean installation. It is suitable for various indoor and outdoor environments, including residential areas and commercial properties. Please read these instructions carefully before installation.

Product Overview

The Real HD PC130T DS-1273ZJ-130-TRL Wall Mount Bracket is constructed from durable aluminum alloy with a surface spray treatment for enhanced weather resistance. It features a cable outlet hole for organized wiring and is designed for convenient installation with compatible camera bases.

Key Features:

• Material: Aluminum alloy with surface spray treatment for durability.
• Cable Management: Integrated outlet hole for neat cable routing.
• Installation: Designed for straightforward installation with compatible camera bases.
• Compatibility: Compatible with various turret-style cameras, including specific models from the DS-2CD23 series (e.g., DS-2CD2343G2-I, DS-2CD2383G2-IU) and OEM turret cameras from brands like LaView, LTS, KT&C, Nuvico, Hunt, and Winic.

Image 1: The Real HD PC130T DS-1273ZJ-130-TRL Wall Mount Bracket.

Image 2: Bottom view of the wall mount bracket, showing mounting points.

Image 3: The wall mount bracket with a compatible turret camera installed.

Setup and Installation

Proper installation is crucial for the stability and performance of your camera system. Ensure the mounting surface is capable of supporting at least three times the total weight of the camera and the mount. The maximum load capacity of this bracket is 4.5 kg.

Required Tools (Not Included):

• Drill
• Drill bits (M6-Ø10, M8-Ø12, depending on expansion bolt size)
• Wrench or spanner

Installation Steps:

1. Prepare the Mounting Surface: Choose a drill bit with an appropriate size (M6-Ø10, M8-Ø12) and drill holes in the wall at the desired mounting location.
2. Insert Expansion Bolts: Insert the expansion bolts into the drilled holes. Ensure the nut is not fully tightened at this stage.
3. Secure Expansion Bolts: Screw up the expansion bolt to expand it slightly, then get down the nut and shim.
4. Mount the Bracket: Align the bracket with the expansion bolts and install the shim, then securely screw down the nuts to fasten the bracket to the wall.
5. Prepare Camera Wiring: Choose the appropriate wall to fix the bracket and route the camera's wiring through the cable entry hole (A).
6. Fix Cap to Bracket: Secure the cap to the bracket and complete any necessary wiring connections (B).
7. Screw Up and Fix Cap: Ensure the cap is firmly screwed onto the bracket.
8. Attach Adapter: Take the bayonet adapter (C) from the bracket packaging and attach it to the camera.
9. Check Hole Site: Verify the hole alignment and fix the adapter to the camera.
10. Connect Cables: Connect the camera's cables to the appropriate ports.
11. Mount Camera to Cap: Fix the camera to the cap using the provided screws.
12. Adjust Camera Angle: Rotate the dome camera to the desired orientation and securely fasten the screw (D) to lock its position.
13. Installation Complete: The installation is now complete.

Image 4: Guide for installing expansion metal screws into a wall.

Image 5: Detailed diagram illustrating the installation process for the bracket and camera.

Operating Instructions

This product is a passive mounting bracket. Once installed, its primary function is to provide a stable and secure platform for your compatible turret camera. Ensure all connections are tight and the camera is securely fastened to prevent movement or detachment.

Compatibility Notice:

This bracket is specifically designed for turret-style cameras. While it is compatible with many models, verify your camera's mounting pattern matches the bracket's design before attempting installation. Some cameras may require minor adjustments or drilling of new holes, as noted by some users.

Maintenance

The Real HD PC130T DS-1273ZJ-130-TRL Wall Mount Bracket requires minimal maintenance due to its durable aluminum alloy construction and weather-resistant finish.

General Maintenance Tips:

• Regular Inspection: Periodically check the bracket and camera for any signs of loosening, corrosion, or damage, especially after severe weather conditions.
• Cleaning: Clean the bracket surface with a soft, damp cloth to remove dirt or debris. Avoid using harsh chemicals or abrasive materials that could damage the finish.
• Fastener Check: Ensure all screws and bolts remain tight to maintain stability.

Troubleshooting

If you encounter issues during or after installation, consider the following common troubleshooting steps:

• Bracket Not Secure: Ensure the expansion bolts are correctly installed and fully tightened. The mounting surface must be solid and capable of supporting the weight.
• Camera Does Not Fit: Verify your camera's model number against the compatibility list. If your camera is not listed, minor modifications (e.g., drilling new holes) may be necessary, but proceed with caution to avoid damaging the bracket or camera.
• Cables Exposed: Re-route cables through the designated cable outlet hole and ensure the cap is properly secured to protect wiring from environmental elements.
• Wobbling Camera: Confirm all camera-to-bracket fasteners are tight, and the camera's rotational lock screw is secured after adjusting the angle.

Specifications

Warranty and Support

For information regarding product warranty or technical support, please refer to the documentation included with your purchase or visit the official Real HD website. Specific warranty terms and support contact details may vary.