James Martin Vanities 961-M28

Download PDF
Contents

James Martin Vanities 961-M28 Rectangular Mirror User Manual

Introduction

Thank you for choosing the James Martin Vanities 961-M28 Rectangular Mirror. This manual provides essential information for the safe installation, proper usage, and maintenance of your new mirror. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Safety Information

  • Always handle the mirror with care. Glass can break and cause injury.
  • Ensure the mounting surface is structurally sound and capable of supporting the mirror's weight (approximately 33 pounds).
  • Use appropriate tools and safety gear during installation.
  • Keep children and pets away from the installation area.
  • Do not hang the mirror in areas where it may be exposed to excessive moisture or direct heat.

Package Contents

Verify that all components are present before proceeding with installation:

  • James Martin Vanities 961-M28 Rectangular Mirror
  • Mounting Hardware (typically includes screws and wall anchors suitable for various wall types)

Setup and Installation

This mirror is designed for wall mounting and can be hung both vertically and horizontally. Proper installation is crucial for safety and stability.

Step 1: Unpacking

Carefully remove the mirror from its packaging. Inspect the mirror and frame for any damage. Retain packaging materials until installation is complete.

Step 2: Choosing a Location

Select a wall location that is clean, dry, and free from obstructions. Consider the desired orientation (vertical or horizontal) and ensure there is adequate space. The mirror dimensions are 39.5 inches in length and 27.5 inches in width.

Dimensions of the James Martin Vanities 961-M28 Rectangular Mirror, showing 39.5 inches in height and 27.5 inches in width.

Image: Mirror dimensions (39.5"L x 27.5"W).

Step 3: Mounting the Mirror

The mirror features a premium quality metal panel for hanging. This panel is integrated into the frame to provide secure attachment points. Use the included mounting hardware appropriate for your wall type (e.g., drywall, stud, masonry).

  • Marking: Hold the mirror against the wall in the desired position and orientation. Lightly mark the locations for the mounting hardware through the hanging points on the metal panel.
  • Drilling: Drill pilot holes at the marked locations. If installing into drywall without a stud, use wall anchors.
  • Securing: Insert screws into the wall anchors or directly into studs, leaving a small portion of the screw head exposed to engage with the mirror's hanging panel.
  • Hanging: Carefully lift the mirror and align the metal hanging panel with the screws. Lower the mirror until it is securely seated on the screws. Gently adjust to ensure it is level.
James Martin Vanities 961-M28 Rectangular Mirror mounted on a wall, showcasing its silver frame and blue faux shagreen vinyl.

Image: James Martin Vanities 961-M28 Rectangular Mirror installed.

Close-up view of the James Martin Vanities 961-M28 Rectangular Mirror frame, highlighting the blue faux shagreen vinyl texture and silver finish.

Image: Detail of the mirror frame with faux shagreen vinyl.

Usage

Once securely installed, your James Martin Vanities mirror serves as both a functional and decorative element in your space. It is suitable for use in bathrooms, living areas, or hallways. Ensure the mirror is not subjected to excessive force or impact.

Maintenance and Care

  • Glass Cleaning: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the frame edges. Wipe gently to avoid streaks.
  • Frame Cleaning: For the iron border and MDF frame with faux shagreen vinyl, wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the finish.
  • Inspection: Periodically check the mounting hardware to ensure the mirror remains securely attached to the wall.

Troubleshooting

  • Mirror appears wobbly: Ensure all mounting screws are tightened and properly engaged with the metal hanging panel. Verify the wall anchors (if used) are secure.
  • Streaks on mirror: Use a clean, lint-free microfiber cloth and a small amount of glass cleaner. Wipe in one direction, then buff with a dry part of the cloth.
  • Frame discoloration: Avoid direct sunlight exposure and harsh cleaning agents. If discoloration occurs, it may be permanent.

Specifications

FeatureDetail
BrandJames Martin Vanities
Model Number961-M28-DB
ShapeRectangular
Product Dimensions (L x W)39.5" x 27.5"
Depth1-3/4" (front to back)
Frame MaterialIron, MDF, Faux Shagreen Vinyl
Mirror Glass3/4" Beveled Edge Premium Glass
Mounting TypeWall-Mounted (Vertical or Horizontal)
Item Weight33 Pounds
Assembly RequiredNo

Warranty Information

The James Martin Vanities 961-M28 Rectangular Mirror is covered under James Martin Vanities' one-year limited warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage and procedures, refer to the official James Martin Vanities warranty documentation or contact customer support.

Customer Support

If you have any questions, require assistance with installation, or need to report a damaged part, please contact James Martin Vanities customer support. Refer to the contact information provided with your purchase or visit the official James Martin Vanities website for support options.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.