Introduction
The Pulsar Crystal Can Bluetooth Speaker (Model EE3433BLKACTCO) is a portable audio device designed to deliver clear sound with dynamic LED light effects. This speaker features Bluetooth connectivity for wireless audio streaming from your smartphone or tablet, and an auxiliary input for wired connections. Its compact design and rechargeable battery make it ideal for use in various settings.

Image: The Pulsar Crystal Can Bluetooth Speaker displaying purple LED lights, positioned next to a smartphone.
Package Contents
Please check the box for the following items:
- Pulsar Crystal Can Bluetooth Speaker (EE3433BLKACTCO)
- USB Charging Cable
- 3.5mm AUX Audio Cable
- User Manual (this document)

Image: Retail packaging for the Pulsar Crystal Can Bluetooth Speaker, showing product features and branding.
Controls and Indicators
Familiarize yourself with the speaker's controls located on the bottom panel:

Image: The bottom panel of the speaker, displaying the power switch, volume/track controls, light mode button, and charging/AUX ports.
- 1. Power Switch (ON/OFF): Slide to turn the speaker on or off.
- 2. '+' Button: Press to increase volume. Press and hold to skip to the next track.
- 3. '-' Button: Press to decrease volume. Press and hold to skip to the previous track.
- 4. Light Mode Button (Bulb icon): Press to cycle through the 6 different LED light modes, including the LED Galaxy effect.
- 5. Play/Pause Button: Press to play or pause audio playback.
- 6. Charging Port: Connect the USB charging cable here.
- 7. AUX Input: Connect the 3.5mm AUX audio cable for wired connections.
Setup
1. Charging the Speaker
Before first use, fully charge the speaker. Connect the small end of the USB charging cable to the speaker's charging port and the larger end to a USB power adapter (not included) or a computer's USB port. The LED indicator (if present, usually near the charging port) will show charging status and turn off when fully charged. A full charge takes approximately 3 hours and provides up to 4 hours of playback.
2. Powering On/Off
Slide the Power Switch on the bottom of the speaker to the "ON" position to turn it on. Slide it to "OFF" to power down the speaker.
3. Bluetooth Pairing
- Ensure the speaker is powered on and within 10 meters (33 feet) of your Bluetooth device.
- The speaker will automatically enter Bluetooth pairing mode, indicated by a flashing LED light (color may vary).
- On your smartphone or tablet, go to the Bluetooth settings menu.
- Search for available devices and select "Pulsar Crystal" or "EE3433BLKACTCO" from the list.
- Once paired, the speaker will emit an audible confirmation tone, and the LED light will stop flashing.
- The speaker will automatically reconnect to the last paired device when powered on, if the device is within range and Bluetooth is enabled.
4. AUX Connection
For devices without Bluetooth, or if you prefer a wired connection:
- Connect one end of the 3.5mm AUX audio cable to the AUX input port on the speaker.
- Connect the other end of the AUX cable to the headphone jack or audio output of your device.
- The speaker will automatically switch to AUX mode.
Operating
Playing Audio
- Bluetooth Mode: After successful pairing, start playing music on your connected device. The audio will stream through the speaker.
- AUX Mode: Once connected via the AUX cable, start playing music on your device.
Volume Control
Press the '+' button to increase volume and the '-' button to decrease volume. You can also adjust the volume directly from your connected device.
Track Control (Bluetooth Mode Only)
- Press the Play/Pause button to pause or resume playback.
- Press and hold the '+' button to skip to the next track.
- Press and hold the '-' button to go to the previous track.
LED Light Modes
Press the Light Mode Button (bulb icon) on the bottom of the speaker to cycle through the 6 available light modes. These modes include various colors and effects, such as the LED Galaxy effect.

Image: Speaker displaying blue LED lights.

Image: Speaker displaying green LED lights.

Image: Speaker displaying red LED lights.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Recharge it regularly, even if not in use for extended periods.
- Water Resistance: This speaker is not waterproof. Avoid exposure to water or excessive moisture.
Troubleshooting
| Problem | Solution |
|---|---|
| Speaker does not power on. | Ensure the battery is charged. Connect the speaker to a power source using the USB charging cable. |
| No sound from the speaker. |
|
| Bluetooth pairing fails. |
|
| LED lights are not working. | Press the Light Mode Button to cycle through the modes. Ensure the speaker is powered on. |
Specifications
| Model Name | EE3433BLKACTCO |
| Brand | Pulsar |
| Connectivity Technology | Bluetooth, Auxiliary |
| Speaker Output Power | 3 Watts |
| Audio Output Mode | Stereo |
| Special Features | 360 LED lights, Bluetooth Compatible, LED Light Effects, Rechargeable |
| Recommended Uses | For smartphone or tablet |
| Compatible Devices | MP3 Player, Smartphone, Tablet |
| Color | Black |
| Average Battery Life | 4 hours |
| Charging Time | 3 hours |
| Waterproof | No |
| Maximum Range | 10 Meters |
| Control Method | Application (Note: Manual buttons are also present) |
| Speaker Size | 13.5 Centimeters (Height) |
| Number of Audio Channels | 2.0 |
Warranty and Support
This Pulsar product comes with a Limited Warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support or warranty claims, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty service.