EVGA 600 GD 80+ Gold 600W Power Supply User Manual

1. Introduction

This manual provides instructions for the installation, operation, maintenance, and troubleshooting of the EVGA 600 GD 80+ Gold 600W Power Supply. This power supply unit (PSU) is designed to deliver stable and efficient power to personal computer components, featuring 80 Plus Gold certified efficiency and a 600-watt output capacity.

2. Safety Information

• Electrical Hazard: Do not open the power supply unit. High voltages are present inside, which can cause serious injury or death. There are no user-serviceable parts inside.
• Professional Installation: Installation should be performed by qualified personnel. Incorrect installation can damage your system.
• Ventilation: Ensure adequate airflow around the power supply. Do not block ventilation openings.
• Environment: Operate the power supply in a dry, well-ventilated environment. Avoid extreme temperatures and humidity.
• Power Off: Always disconnect the AC power cord from the wall outlet before installing, removing, or servicing the power supply or any other computer components.

3. Package Contents

Verify that all items are present in the package:

• EVGA 600 GD 80+ Gold 600W Power Supply
• AC Power Cord
• Mounting Screws (4x)
• Cable Set (attached):
  • 24-pin ATX Motherboard Connector
  • 4+4-pin EPS/CPU Connector
  • PCIe 6+2-pin Connectors (multiple)
  • SATA Power Connectors (multiple)
  • 4-pin Molex Peripheral Connectors (multiple)
  • Floppy Drive Connector (on some peripheral cables)

4. Product Overview

The EVGA 600 GD is a non-modular power supply designed for reliable performance. It features an integrated cooling fan and fixed cables for essential system components.

Figure 4.1: Top view of the EVGA 600 GD Power Supply, highlighting the fan grille for cooling.

Figure 4.2: The EVGA 600 GD Power Supply with its permanently attached cables bundled together.

Figure 4.3: Product label detailing the electrical input and output specifications for the 600 GD model.

Figure 4.4: Rear panel of the power supply, showing the AC power input socket and the main power switch.

Figure 4.5: Illustration of the various cable types included with the power supply, such as MB, CPU, VGA, SATA, and Molex connectors.

5. Setup and Installation

Follow these steps to install the EVGA 600 GD Power Supply into your computer system:

1. Preparation: Ensure your computer is completely powered off and unplugged from the wall outlet. Open your computer case.
2. Remove Old PSU (if applicable): Disconnect all cables from your existing power supply and remove it from the case.
3. Mounting the PSU: Carefully place the EVGA 600 GD into the power supply bay of your computer case. Secure it with the provided mounting screws.
4. Connect 24-pin ATX Cable: Connect the large 24-pin connector from the PSU to the corresponding port on your motherboard. Ensure it clicks into place.
5. Connect 4+4-pin EPS/CPU Cable: Connect the 4+4-pin CPU power connector to the CPU power port on your motherboard. This is typically located near the CPU socket. If your motherboard only requires a 4-pin connector, use only one half of the 4+4-pin connector.
6. Connect PCIe 6+2-pin Cables: Connect the 6+2-pin PCIe power connectors to your graphics card(s). If your graphics card requires an 8-pin connector, use both the 6-pin and 2-pin sections together.
7. Connect SATA Power Cables: Connect the SATA power connectors to your storage drives (SSDs, HDDs) and optical drives.
8. Connect 4-pin Molex Cables: Connect the 4-pin Molex connectors to any other peripherals that require them, such as case fans or older drives.
9. Cable Management: Route and secure all cables to ensure proper airflow and a tidy internal setup.
10. Final Connection: Close your computer case. Connect the AC power cord to the power supply's input socket and then to a wall outlet.

6. Operating Instructions

After successful installation, follow these steps to operate your system:

1. Power Switch: Ensure the power switch on the back of the EVGA 600 GD Power Supply is in the 'I' (On) position.
2. System Power On: Press the power button on your computer case to start your system.
3. Power Off: To shut down your system, use the operating system's shutdown procedure. For a complete power cycle, turn off the computer, then flip the power switch on the PSU to 'O' (Off) and unplug the AC cord.

7. Maintenance

Proper maintenance helps ensure the longevity and optimal performance of your power supply:

• Dust Removal: Periodically, with the computer powered off and unplugged, use compressed air to clean dust from the power supply's fan and ventilation grilles. Dust accumulation can impede cooling and reduce efficiency.
• Clear Airflow: Ensure that no cables or other components are obstructing the airflow to or from the power supply.
• Environmental Conditions: Maintain a clean, dry, and cool operating environment for your computer.

8. Troubleshooting

If you encounter issues with your power supply, refer to the following common troubleshooting steps:

• No Power to System:
  • Verify the AC power cord is securely connected to both the wall outlet and the PSU.
  • Ensure the power switch on the back of the PSU is in the 'I' (On) position.
  • Check all internal power connections (24-pin ATX, 4+4-pin EPS/CPU, PCIe) are firmly seated.
  • Test the wall outlet with another device to confirm it has power.
• System Instability or Random Shutdowns:
  • Ensure all power connections to components are secure.
  • Verify that the power supply's wattage (600W) is sufficient for all installed components, especially high-power graphics cards and CPUs.
  • Check for proper ventilation within the computer case to prevent overheating.
• Excessive Fan Noise:
  • A certain level of fan noise is normal during operation, especially under load.
  • If noise is unusually loud or grinding, power off the system and check for dust accumulation in the fan or obstructions. Clean if necessary.
  • If the issue persists, contact EVGA customer support.

9. Specifications

10. Warranty and Support

The EVGA 600 GD Power Supply (Model 100-GD-0600-V1) is backed by a 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

For technical support, warranty claims, or further assistance, please visit the official EVGA website or contact EVGA customer service directly. Refer to your product registration or purchase documentation for specific warranty terms and conditions.

EVGA Official Website: www.evga.com