1. Introduction
This manual provides essential information for the safe and effective use of your U`King RGB 36 LED Rechargeable Stage Par Light. Please read these instructions thoroughly before operating the device and retain them for future reference.
2. Safety Precautions
- Ensure the device is placed on a stable surface or securely mounted to prevent falling.
- Do not expose the device to rain, moisture, or extreme temperatures.
- Avoid direct eye exposure to the light source, as it can cause eye damage.
- Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
- Keep the device away from flammable materials.
- Use only the provided power adapter for charging.
- Disconnect the power supply before cleaning or performing any maintenance.
3. What's Included
Verify that all items are present in the package:
- U`King RGB 36 LED Rechargeable Stage Par Light
- Power Adapter
- Remote Control
- Mounting Bracket and Screws
- User Manual
Image: Package contents including the par light, power adapter, remote control, and mounting bracket.
4. Setup Guide
4.1. Charging the Device
Before first use, fully charge the par light for up to 7 hours. The device features a built-in high-capacity 5000mAh battery.
- Connect the power adapter to a suitable power outlet.
- Plug the charging cable into the charging port on the back of the par light.
- The charging indicator light will be red during charging and turn green when fully charged.
Image: The back panel of the par light, highlighting the charging port and indicator light (labeled C and B respectively).
4.2. Mounting Options
The par light comes with a stand/bracket for versatile placement.
- Floor Mount: Position the light on a flat, stable surface using the integrated bracket.
- Truss or Wall Mount: Use the provided bracket and screws to securely attach the light to a truss system or wall. Ensure the mounting surface can support the weight of the fixture. The bracket allows for a 360-degree adjustment of the beam angle.
Image: The par light shown with its dimensions and the adjustable bracket, illustrating various mounting possibilities.
5. Operation
5.1. Control Panel Overview
The back panel of the par light features a digital display and control buttons for direct operation.
Image: Close-up of the par light's control panel, displaying 'd001' for DMX mode and showing the Menu, Up, Down, and Enter buttons.
- MENU: Cycles through different operating modes and settings.
- UP/DOWN: Navigates through options or adjusts values within a selected mode.
- ENTER: Confirms selections or saves settings.
- Digital Display: Shows the current mode, DMX address, or setting value.
5.2. Remote Control Functions
The included IR remote control provides convenient wireless operation of the par light.
Image: The remote control for the U`King par light, showing buttons for color selection, mode changes (Flash, Jump, Pulse, Fade, Sound, DMX), brightness adjustment, and timing functions.
- ON/OFF: Powers the light on or off.
- COLOR: Cycles through fixed colors (Red, Green, Blue, Yellow, Purple, Cyan, White).
- FLASH: Activates strobe effect.
- JUMP: Activates color jump mode.
- PULSE: Activates color pulse transform mode.
- FADE: Activates color gradient mode.
- SOUND: Activates sound-activated mode, where lights change with music beats.
- DMX: Switches to DMX control mode.
- +/-: Adjusts brightness, speed, or DMX address.
- Timing Buttons (1H, 3H, 4H, 6H): Sets the light to operate for a specified duration.
5.3. Lighting Modes
The par light offers multiple lighting modes for various effects:
- DMX512 Mode: Allows professional control via a DMX controller. The light has 7 DMX channels.
- Automatic Mode: Cycles through pre-programmed light sequences.
- Sound Activated Mode: Lights change color and strobe in response to ambient sound.
- Color Jump Mode: Colors change abruptly.
- Color Gradient Mode: Colors transition smoothly.
- Color Strobe Mode: Flashing light effect.
- Color Horse Racing Mode: Dynamic color chasing effect.
Video: Demonstration of various lighting modes including color changes, jumps, and fades, showcasing the versatility of the U`King RGB 36 LED Uplights.
5.4. DMX Control
For advanced lighting control, connect the par light to a DMX512 controller.
- Connect a DMX cable from the DMX OUT port of your controller to the DMX IN port of the first par light.
- For multiple lights, connect the DMX OUT of the first light to the DMX IN of the next, and so on (daisy-chaining).
- Set the DMX address for each light using the control panel. Refer to the DMX channel chart in the full manual for specific channel functions.
Video: A guide demonstrating how to connect and set up U`King Rechargeable Stage Par Lights for DMX control and synchronous operation.
5.5. Synchronous Operation (Master-Slave)
To synchronize multiple par lights without a DMX controller, use the master-slave function.
- Connect the lights using DMX cables as described in the DMX Control section.
- Set the first light (master) to an automatic or sound-activated mode.
- Set subsequent lights (slaves) to DMX mode with address 'd001'. The slave lights will then mirror the master light's effects.
6. Maintenance
- Cleaning: Regularly wipe the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place when not in use.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the device periodically even if not in use.
- Heat Dissipation: The built-in heat dissipation system helps maintain optimal performance. Ensure ventilation openings are not obstructed.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is discharged or power adapter is not connected. | Charge the device fully. Ensure power adapter is securely connected. |
| Remote control not working. | Battery in remote is dead or remote is out of range. | Replace the remote control battery. Ensure remote is within effective range and pointed towards the light. |
| Lights not synchronizing in DMX/Master-Slave mode. | Incorrect DMX address settings or faulty DMX cable. | Verify DMX addresses are set correctly. Check DMX cable connections. Ensure master is in an active mode and slaves are set to 'd001'. |
| Sound activated mode not responding. | No sound input or low sensitivity. | Ensure there is sufficient sound for the microphone to pick up. Adjust sensitivity if available. |
8. Technical Specifications
| Feature | Detail |
|---|---|
| Model Number | ZQ01082 |
| Light Source | 36 x 1W RGB LEDs (12 Red, 12 Blue, 12 Green) |
| Power Source | Battery Powered (5000mAh Lithium Manganese Dioxide battery included) |
| Wattage | 36 Watts |
| Control Modes | DMX512, Automatic, Sound Activated, Master-Slave |
| DMX Channels | 7 Channels |
| Beam Angle | 30 Degrees |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions | 6.9"L x 3.9"W x 6.9"H |
| Item Weight | 1.91 Pounds |
| Certification | FCC |
Image: The U`King par light displaying its dimensions (2.5 inches depth, 7.9 inches width/height) and indicating a built-in 5000mAh battery.
9. Warranty and Customer Support
U`King products are designed for quality and reliability. For warranty information or technical assistance, please refer to the contact details provided with your purchase documentation or visit the official U`King website. Our customer support team is available to assist with any questions or concerns regarding your product.
