AERAULIQA WKG100 Glass Application Kit Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of the AERAULIQA WKG100 Glass Application Kit. This accessory is specifically designed for use with Aerauliqa QD-QA-QS 100 Axial Vacuum Cleaners, facilitating their integration into glass surfaces.

Key features of the WKG100 kit include:

• Accessory for Aerauliqa QD-QA-QS 100 Axial Vacuum Cleaners.
• Constructed from high-quality ABS (Acrylonitrile Butadiene Styrene) in RAL9010 color.
• Designed to be shock and UV resistant, ensuring durability.
• Accommodates glass thickness ranging from 2 to 35 mm.
• Requires a glass hole diameter of 115 mm for proper installation.

2. Safety Information

Please read all safety instructions carefully before installing or operating the WKG100 Glass Application Kit. Failure to follow these instructions may result in property damage or injury.

• Ensure all power to the vacuum cleaner unit is disconnected before beginning installation.
• Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves, during installation.
• Handle glass with extreme care to prevent cuts or breakage.
• Verify that the glass hole dimensions precisely match the kit's requirements (115 mm diameter) to ensure a secure fit.
• If you are unsure about any step, consult a qualified professional.

3. Product Overview

The WKG100 kit is designed to provide a secure and aesthetically pleasing method for installing Aerauliqa QD-QA-QS 100 vacuum cleaners through glass panels. It consists of a durable ABS housing with an integrated external grill.

Figure 3.1: Aerauliqa WKG100 Glass Application Kit with fixed external grill. This image shows the Aerauliqa WKG100 Glass Application Kit, a white rectangular unit with a fixed external grill, designed for integration with vacuum cleaners.

4. Setup and Installation

Follow these steps for proper installation of the WKG100 Glass Application Kit:

1. Prepare the Glass: Ensure the glass panel has a precisely cut circular hole with a diameter of 115 mm. The glass thickness must be between 2 mm and 35 mm.
2. Position the Kit: Carefully insert the WKG100 kit into the prepared glass hole. Ensure the external grill faces the desired exterior side.
3. Secure the Kit: The kit is designed for a snug fit. Apply gentle, even pressure to seat it properly. No additional fasteners are typically required for the kit itself, as it relies on the precise hole size and the vacuum cleaner's mounting mechanism.
4. Connect Vacuum Cleaner: Once the WKG100 kit is securely in place, proceed with the installation of the Aerauliqa QD-QA-QS 100 vacuum cleaner unit according to its specific instructions, connecting it to the WKG100 kit's internal opening.

Figure 4.1: Dimensional Diagram. This diagram illustrates the key dimensions (A and B) and glass hole diameter for the WKG100, WKG120, and WKG150 models. For the WKG100, dimension A is 164mm, B is 87mm, and the glass hole diameter is 115mm. Dimensions are in millimeters, and the kit supports glass thickness from 2 to 35 mm.

5. Operation

The WKG100 Glass Application Kit is a passive component that facilitates the mounting of your Aerauliqa QD-QA-QS 100 vacuum cleaner. Its operation is directly tied to the functionality of the connected vacuum cleaner. Once the vacuum cleaner is installed and powered on, air will flow through the WKG100's grill and ducting as designed by the vacuum cleaner system.

6. Maintenance

The WKG100 Glass Application Kit requires minimal maintenance due to its durable ABS construction. Regular cleaning will help maintain its appearance and ensure unobstructed airflow.

• Cleaning: Periodically wipe the external grill and visible surfaces with a soft, damp cloth. For stubborn dirt, a mild, non-abrasive cleaning solution can be used. Avoid harsh chemicals or abrasive materials that could damage the ABS plastic.
• Inspection: Occasionally inspect the kit for any signs of damage or wear, particularly around the glass interface. Ensure the grill remains free of debris that could impede airflow.

7. Troubleshooting

The WKG100 kit is a simple, non-mechanical component. Most issues will likely stem from the connected vacuum cleaner or improper installation.

• Reduced Airflow:
  • Check for Obstructions: Ensure the external grill is not blocked by debris (leaves, dust, etc.).
  • Verify Vacuum Cleaner Function: Confirm that the Aerauliqa QD-QA-QS 100 vacuum cleaner is operating correctly and its filters are clean.
• Loose Fit in Glass:
  • Verify Hole Size: The glass hole must be precisely 115 mm. If the hole is too large, the kit may not fit securely.
  • Check Glass Thickness: Ensure the glass thickness is within the 2-35 mm range.

For issues related to the vacuum cleaner's performance, refer to the vacuum cleaner's specific instruction manual.

8. Specifications

Figure 8.1: WKG100 Performance Curve. This graph displays the static pressure (Pa) versus air flow (m³/h) performance curve for the WKG100 model. It indicates how the static pressure increases with higher air flow rates, providing insight into the kit's operational efficiency.

9. Warranty and Support

AERAULIQA products are manufactured to high-quality standards. For specific warranty information regarding your WKG100 Glass Application Kit, please refer to the documentation provided with your purchase or visit the official AERAULIQA website.

For technical support, troubleshooting assistance, or inquiries about replacement parts, please contact AERAULIQA customer service through their official channels. Contact information can typically be found on the product packaging or the manufacturer's website.