1. Introduction
Thank you for choosing the Lindby Aiden LED Wall Lamp. This modern wall lamp combines a stylish fabric shade with a practical, movable LED reading light, making it an ideal lighting solution for bedrooms, living rooms, or other indoor spaces. This manual provides essential information for the safe installation, operation, maintenance, and troubleshooting of your new lamp.
The Aiden wall lamp is designed to provide energy-efficient and pleasant illumination, enhancing the ambiance of your home.
Figure 1: Lindby Aiden LED Wall Lamp in a typical installation.
2. Safety Instructions
Please read these safety instructions carefully before installation or use. Keep this manual for future reference.
- Electrical Safety: Always disconnect the main power supply before performing any installation, maintenance, or cleaning. Installation should be carried out by a qualified electrician in accordance with local wiring regulations.
- Indoor Use Only: This product is designed for indoor use (IP20 protection rating). Do not expose it to moisture or outdoor elements.
- Bulb Type: Ensure that the correct type and wattage of E14 bulb are used for the main light. The integrated LED reading light is not user-replaceable.
- Handling: Do not modify the product in any way. Avoid touching the light source directly when the lamp is on or immediately after it has been switched off, as it may be hot.
- Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
3. Package Contents
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, please contact your retailer.
- Lindby Aiden Wall Lamp unit (including integrated LED reading light and fabric shade)
- Mounting hardware (screws, wall plugs)
- Instruction Manual
Note: The E14 bulb for the main light is not included and must be purchased separately. The 3W LED for the reading light is integrated and included.
4. Setup and Installation
Installation should be performed by a qualified electrician.
- Prepare the Installation Area: Choose a suitable location on an indoor wall. Ensure the power supply to the chosen circuit is switched off at the main breaker.
- Mark Drilling Points: Hold the lamp's mounting plate against the wall at the desired height and mark the drilling points.
- Drill Holes: Drill holes at the marked points and insert appropriate wall plugs (if necessary).
- Electrical Connection: Connect the household electrical wires to the lamp's terminal block. Ensure correct polarity (Live, Neutral, Earth). Refer to Figure 2 for internal wiring details.
- Mount the Lamp: Secure the lamp's mounting plate to the wall using the provided screws.
- Install E14 Bulb: Screw an E14 bulb (max 10W, not included) into the main lamp holder.
- Restore Power: Once installation is complete and all connections are secure, restore power at the main breaker.
Figure 2: Internal wiring connections.
Figure 3: E14 lamp holder and LED reading light.
5. Operating Instructions
The Lindby Aiden wall lamp features separate controls for the main light and the LED reading light.
- Main Light: The main light, housed within the fabric shade, is controlled by a rocker switch located on the bottom edge of the lamp's base. Press the switch to turn the main light ON or OFF.
- LED Reading Light: The integrated LED reading light is controlled by a separate push-button switch, also located on the bottom edge of the lamp's base. Press the button to turn the reading light ON or OFF. The reading light arm is adjustable, allowing you to direct the light as needed.
Figure 4: Control switches for main light and reading light.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your lamp.
- Cleaning: Before cleaning, ensure the lamp is switched off and disconnected from the power supply. Wipe the metal parts with a soft, dry cloth. The fabric shade can be gently dusted with a soft brush or a dry cloth. Do not use liquid cleaners or abrasive materials.
- Bulb Replacement (E14): To replace the E14 bulb for the main light, first disconnect the power supply. Allow the bulb to cool down completely. Unscrew the old bulb and screw in a new E14 bulb (max 10W). Do not overtighten.
- LED Reading Light: The LED reading light is integrated and not designed for user replacement. If it malfunctions, please contact customer support.
7. Troubleshooting
If you encounter any issues with your Lindby Aiden wall lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Main light does not turn on. | No power supply, faulty E14 bulb, loose connection. | Check power supply at the breaker. Replace E14 bulb. Ensure electrical connections are secure (consult an electrician). |
| LED reading light does not turn on. | No power supply, faulty integrated LED. | Check power supply at the breaker. If power is present and main light works, the integrated LED may be faulty. Contact customer support. |
| Light flickers. | Loose bulb, unstable power supply, incompatible bulb. | Tighten E14 bulb. Check household wiring (consult an electrician). Ensure E14 bulb is compatible. |
If the problem persists after trying these solutions, please contact Lindby customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 8032170 |
| Dimensions (L x W x H) | 17.6 cm x 14 cm x 30.8 cm |
| Weight | 990 g |
| Material | Fabric, Metal |
| Color | White, Nickel |
| Style | Modern |
| Room Type | Living Room / Dining Room |
| Indoor/Outdoor Use | Indoor |
| Power Source | AC (Alternating Current) |
| Control Method | Push Button (for LED reading light), Rocker Switch (for main light) |
| Main Light Bulb Type | E14 (max 10W, not included) |
| Reading Light Bulb Type | Integrated LED (3W, included) |
| Voltage | 230 Volts |
| Luminous Flux (Reading Light) | 210 lm |
| Color Temperature (Reading Light) | 3000 Kelvin (Warm White) |
| Protection Class | I |
| IP Rating | IP20 |
| Assembly Required | No |
| Energy Efficiency Class | G |
For detailed product data, refer to the product data sheet and energy label:
Figure 5: Product Data Sheet
9. Warranty
Warranty information for this product is not explicitly detailed in the provided product data. Please refer to your purchase documentation or contact your retailer for specific warranty terms and conditions.
10. Support
For any questions related to the Lindby Aiden LED Wall Lamp, including technical assistance or parts replacement, please do not hesitate to contact Lindby customer service. You can typically reach them through their seller profile on the platform where you purchased the product.
For general inquiries about Lindby products, you may visit the Lindby brand store: Lindby Brand Store