Intex Glitter Pink Flamingo Inflatable Swim Ring

Introduction

Thank you for choosing the Intex Glitter Pink Flamingo Inflatable Swim Ring. This product is designed to provide a fun and enjoyable experience in the water for children aged 3 to 6 years. Please read this manual carefully before use to ensure proper setup, operation, and maintenance, and to maximize the lifespan of your swim ring.

Image: Intex Glitter Pink Flamingo Inflatable Swim Ring, showcasing its design and glitter accents.

Safety Information

WARNING: THIS IS NOT A LIFESAVING DEVICE. DO NOT LEAVE CHILD UNATTENDED WHILE DEVICE IS IN USE. USE ONLY UNDER COMPETENT SUPERVISION.

• Always ensure the swim ring is fully inflated before use.
• Do not over-inflate.
• Keep away from sharp objects and abrasive surfaces.
• Do not use in open water, strong currents, or where there are sudden drops.
• Recommended for children aged 3 to 6 years.
• Maximum weight capacity: 60 kg (132 lbs).
• Inspect the product for damage before each use.

Setup

1. Unpack: Carefully remove the swim ring from its packaging. Ensure no sharp objects are used that could puncture the material.
2. Locate Valve: Find the inflation valve on the swim ring.
3. Inflate: Open the valve cap. Use a hand or foot air pump (not included) to inflate the swim ring. Inflate until the ring is firm to the touch but not hard. The material should be smooth, not stretched taut.
4. Seal Valve: Quickly close the valve cap and push it firmly into the body of the swim ring to ensure an airtight seal.

Image: Product packaging, showing the flamingo design.

Image: Dimensions diagram for the swim ring.

Operating

Once fully inflated, the Intex Glitter Pink Flamingo Inflatable Swim Ring is ready for use. Ensure the child is comfortable and properly positioned within the ring. Always maintain close supervision of children in and around water.

Image: A child enjoying the swim ring in a pool.

Image: Multiple individuals enjoying Intex floats in a pool setting.

Maintenance

• Cleaning: Clean the swim ring with mild soap and water. Rinse thoroughly and allow to air dry completely before storing. Do not use harsh chemicals or abrasive cleaners.
• Storage: When not in use, deflate the swim ring by opening the valve and gently pressing out the air. Fold it neatly and store it in a cool, dry place, away from direct sunlight and extreme temperatures. Keep away from pests and sharp objects.
• Repair: In case of a small puncture, use a repair patch kit (often included or sold separately by Intex) to mend the hole. Follow the instructions provided with the repair kit.

Troubleshooting

• Swim Ring Deflates Quickly:
  • Check if the inflation valve cap is securely closed and pushed in.
  • Inspect the entire surface of the swim ring for punctures or small holes. You can do this by submerging the inflated ring in water and looking for air bubbles.
  • If a leak is found, use a repair patch as described in the Maintenance section.
• Difficulty Inflating:
  • Ensure the pump nozzle is properly inserted into the valve.
  • Check if the pump itself is functioning correctly.

Specifications

Warranty and Support

Specific warranty details and direct customer support contact information are not provided within this manual. For warranty claims, product support, or to purchase replacement parts, please refer to the retailer where the product was purchased or visit the official Intex website for regional contact information.