1. Introduction
The Head Rush Hydra Bong is an inflatable beverage dispenser designed for group use. This manual provides instructions for the proper setup, operation, and maintenance of your Hydra Bong to ensure a safe and enjoyable experience.
Image 1.1: The Head Rush Hydra Bong, an inflatable beverage dispenser, shown with its product packaging.
2. Product Components
The Head Rush Hydra Bong consists of the following main components:
- Inflatable Base/Stand: Provides stability for the unit.
- Central Funnel: The main reservoir for beverages.
- Four Flexible Tubes: Connect to the central funnel for individual use.
- Stoppers: Located at the end of each flexible tube to control beverage flow.
Image 2.1: A detailed view of the Hydra Bong, highlighting the central funnel and the four flexible tubes with their respective stoppers.
3. Setup Instructions
- Unpack: Carefully remove all components from the packaging.
- Inflate: Locate the inflation valve on the inflatable base/stand. Use an air pump (not included) to inflate the unit until it is firm but not overinflated. Ensure all air chambers are adequately filled.
- Attach Tubes: Connect each of the four flexible tubes securely to the designated ports on the central funnel. Ensure a tight seal to prevent leaks.
- Position Stoppers: Verify that the stoppers at the end of each tube are in the closed position before filling.
4. Operating Instructions
- Fill Funnel: Pour your desired beverage into the central funnel. The Hydra Bong can hold up to 9 standard drinks. Do not overfill.
- Prepare for Use: Each user should hold one flexible tube.
- Initiate Flow: To dispense the beverage, open the stopper at the end of your flexible tube. Close the stopper to stop the flow.
Image 4.1: Individuals demonstrating the use of the Hydra Bong in a social setting, each holding a flexible tube.
Image 4.2: The Hydra Bong being used by a group in a swimming pool, showcasing its floating capability.
5. Maintenance and Care
- Cleaning: After each use, thoroughly rinse the central funnel and all flexible tubes with warm water. Use a mild soap if necessary. Ensure all beverage residue is removed.
- Drying: Allow all components to air dry completely before storage to prevent mold or mildew.
- Storage: Deflate the unit and store it in a cool, dry place away from direct sunlight and sharp objects.
- Material: The Hydra Bong is made from durable, BPA-free plastic.
6. Troubleshooting
- Leakage: If the unit leaks, check all tube connections to ensure they are securely fastened. Inspect the inflatable base for any punctures. If a puncture is found, a standard vinyl repair kit (not included) may be used.
- Slow Flow: Ensure stoppers are fully open. Check tubes for kinks or blockages.
- Unit Does Not Stay Inflated: Verify that the inflation valve cap is securely closed. Check for any small holes or tears in the inflatable material.
7. Specifications
- Product Name: Head Rush Hydra Bong
- Model: Hydra Bong
- Material: BPA-free Plastic
- Capacity: Up to 9 standard drinks
- Number of Users: Four
- Item Weight: Approximately 5.9 Pounds (2.67 kg)
- Manufacturer: Head Rush
Image 7.1: Illustrative diagram showing typical funnel dimensions, approximately 8 inches in width and 6.5 inches in height.
8. Safety Information
- This product is intended for adult use only.
- Please consume alcoholic beverages responsibly.
- Do not use this product while operating machinery or driving.
- Keep out of reach of children and pets.
- Avoid overinflation, which can damage the product.
- Ensure the product is clean and dry before storage to prevent bacterial growth.
9. Warranty and Support
This product is supplied new, direct from the manufacturer. For any questions, support, or concerns regarding your Head Rush Hydra Bong, please contact Head Rush Products, Inc. directly. Head Rush has been manufacturing drinking accessories since 1992.
For contact information, please refer to the product packaging or the official Head Rush website.
