Introduction
Thank you for choosing the daylight Company Halo Go Magnifier Lamp. This portable, rechargeable lamp is designed to provide clear illumination and magnification for various tasks, including reading, hobbies, and detailed craft work. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your product.
Image: The Halo Go Magnifier Lamp in its upright position, showcasing its sleek design and open magnifying lens.
Package Contents
- Halo Go Magnifier Lamp
- USB Charging Cable
- Power Adapter
- Travel Bag
- Instruction Manual
Setup
1. Unpacking
Carefully remove all components from the packaging. Inspect the lamp for any signs of damage. Retain packaging for future storage or transport.
2. Initial Charge
Before first use, fully charge the Halo Go lamp. Connect the provided USB charging cable to the lamp's charging port and plug the adapter into a standard wall outlet. The battery indicator lights will show charging status. A full charge provides up to 8 hours of continuous brightness.
Image: The Halo Go lamp providing illumination for detailed work, highlighting its rechargeable battery feature.
3. Positioning the Lamp
Place the lamp on a stable, flat surface. The lamp features an adjustable gooseneck, allowing you to position the light and magnifier precisely where needed. The base is designed for stability, but ensure it is not placed in a precarious position.
Image: Illustration demonstrating the rotational capability of the lamp's head for optimal positioning.
Operating Instructions
1. Power On/Off
To turn the lamp on or off, press the power button located on the base of the lamp. This is a push-button switch.
2. Adjusting Brightness Levels
The Halo Go lamp offers 3 brightness levels. Press the power button repeatedly to cycle through the brightness settings (low, medium, high) and then off. Select the appropriate brightness for your task and environment.
Image: Visual representation of the lamp's portable nature and key lighting features, including multiple brightness settings.
3. Using the Magnifier
The lamp features a 5 dioptres (2.25X) magnification lens and a 12 dioptres (4.0X) inset lens for enhanced detail. Position your work under the lens and adjust the gooseneck for optimal focus and comfort. The LEDs are strategically placed around the magnification lens to ensure uniform lighting over your project.
Image: Detailed view of the 9cm diameter magnification lens with integrated LEDs, illustrating uniform illumination.
Image: The Halo Go lamp in use for cross-stitching, demonstrating its magnification capabilities for intricate tasks.
Maintenance
1. Cleaning
To clean the lamp, ensure it is turned off and unplugged. Wipe the surfaces with a soft, dry cloth. For the lens, use a lens cleaning cloth and a suitable lens cleaning solution to avoid scratches. Do not use abrasive cleaners or solvents.
2. Storage and Transport
The Halo Go lamp is designed to fold flat for convenient storage and transport. Gently fold the lamp until it is compact. Use the included travel bag to protect the lamp during transit.
Image: Illustration of the lamp's foldable design, emphasizing its portability and ease of storage.
Image: The included travel bag for protecting the Halo Go lamp during transport.
Troubleshooting
- Lamp not turning on: Ensure the lamp is fully charged. If using while plugged in, verify the USB cable and power adapter are securely connected and the outlet is functional.
- Battery not charging: Check the USB cable and adapter for damage. Try using a different USB port or power adapter if available. Ensure the charging port on the lamp is clean and free of debris.
- Light flickering or dim: This may indicate a low battery. Recharge the lamp. If the issue persists after a full charge, contact customer support.
- Magnifier lens unclear: Clean the lens carefully with a soft, lint-free cloth and appropriate lens cleaner. Avoid touching the lens with bare hands.
Specifications
Image: Dimensional drawing of the Halo Go lamp, indicating its height, width, and depth.
| Model Name | Halo Go |
| Model Number | U25201 |
| Dimensions (H x W x D) | 12.99" x 5.91" x 5.91" (33cm x 15cm x 15cm) |
| Item Weight | 1.5 Pounds (0.68 kg) |
| Power Source | Battery Powered (USB Rechargeable) |
| Battery Type | Lithium Ion |
| Battery Life | Up to 8 hours (continuous brightness) |
| Wattage | 6 watts |
| Voltage | 110 Volts |
| Light Source Type | LED (Daylight 6,000 K) |
| Number of Light Sources | 12 |
| Magnification | 5 dioptres (2.25X) with 12 dioptres (4.0X) inset lens |
| Color Temperature | 6,000 K |
| CRI | 95+ |
| Material | Plastic |
| Switch Type | Push Button (Touch Control) |
| Color | White / Silver |
Warranty Information
The daylight Company Halo Go Magnifier Lamp comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Customer Support
For further assistance, technical support, or warranty inquiries, please contact daylight Company customer service. Refer to the contact information provided on the product packaging or visit the official daylight Company website.
