Beldray BEL0908 Clean & Dry Cordless Cleaner User Manual

1. Introduction

Thank you for purchasing the Beldray BEL0908 Clean & Dry Cordless Cleaner. This manual provides important information regarding the safe operation, maintenance, and troubleshooting of your appliance. Please read this manual thoroughly before first use and retain it for future reference.

The Beldray Clean & Dry Cordless Cleaner is designed to effectively wash, clean, and dry hard floors, leaving them spotless. Its cordless design and dual tank system offer convenient and efficient cleaning.

2. Important Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Read all instructions before using the appliance.
• Do not immerse the appliance in water or any other liquid.
• This appliance is for domestic use only.
• Keep the appliance out of reach of children.
• Ensure the voltage indicated on the rating label corresponds with your mains supply voltage.
• Do not use the appliance if any part is damaged.
• Unplug the appliance from the mains supply before cleaning or maintenance.
• Only use attachments recommended by the manufacturer.
• This appliance is designed for wet cleaning of hard floors. Do not use on carpets or rugs.
• Empty the dirty water tank regularly to prevent overflow.
• Do not use flammable or combustible liquids with this appliance.

3. Product Components

Familiarize yourself with the parts of your Beldray Clean & Dry Cordless Cleaner:

• 

  Main Unit: The primary body of the cleaner, housing the motor and battery.
• 

  Clean Water Tank (550ml): Located at the top, this tank holds fresh water and cleaning solution for washing floors.

• 

  Dirty Water Tank (280ml): Located at the bottom, this tank collects dirty water and debris vacuumed from the floor.

• 

  Dual-Purpose Brush Bar: Cleans and dries simultaneously. This removable component is essential for effective cleaning.
• 

  Storage Tray: Provides a convenient place to store the cleaner and charge it.

• 

  Charger: For recharging the 22.2V lithium-ion battery.

4. Setup and Initial Use

4.1 Charging the Battery

Before first use, fully charge the appliance. The 22.2V lithium-ion battery provides up to 30 minutes of operating time on a full charge, which typically takes 3-4 hours.

1. Place the cleaner on its storage tray.
2. Connect the charger to the charging port on the cleaner.
3. Plug the charger into a suitable mains outlet.
4. The charging indicator light will illuminate during charging and change when fully charged.

4.2 Filling the Clean Water Tank

1. Remove the clean water tank from the main unit.
2. Open the tank cap.
3. Fill the tank with clean water. You may add a small amount of suitable hard floor cleaning solution, following the solution manufacturer's instructions. Do not overfill.
4. Close the tank cap securely and reinsert the tank into the main unit.

5. Operating Instructions

5.1 Cleaning Hard Floors

The Beldray Clean & Dry Cordless Cleaner is suitable for sealed wood and hard floors, including tile, vinyl, and laminate.

• 

  Image description: The Beldray cleaner shown on different hard floor surfaces like sealed wood, tile, vinyl, and laminate, indicating its versatility.

1. Ensure the clean water tank is filled and the dirty water tank is empty.
2. Press the power button to turn on the cleaner.
3. Select the desired speed setting (2 speeds available). Use the boost function for stubborn dirt.
4. Begin cleaning by moving the cleaner across the floor. The dual-purpose brush bar will wash and clean, while the vacuum system simultaneously sucks up dirty water, leaving the floor clean and dry.
5. The swivel floor head allows for easy maneuverability around corners and under furniture.
6. 

   Image description: The cleaner's swivel head demonstrating its ability to navigate around obstacles and reach tight spaces.

7. Monitor the dirty water tank. If the max fill line is exceeded, empty it immediately to prevent leaks.

5.2 Handling Spills

The cleaner can also be used to quickly clean up liquid spills on hard floors.

• 

  Image description: The cleaner effectively vacuuming a liquid spill from a hard floor, demonstrating its spill clean-up capability.

1. Position the cleaner over the spill.
2. Turn on the cleaner and move it slowly over the liquid to vacuum it up.
3. Empty the dirty water tank immediately after cleaning up spills.

6. Maintenance and Cleaning

Regular maintenance ensures optimal performance and extends the life of your appliance.

6.1 Emptying and Cleaning the Dirty Water Tank

The dirty water tank should be emptied after each use or when it reaches the maximum fill line.

• 

  Image description: A hand removing the dirty water tank from the cleaner, showing the ease of access for emptying.

1. Turn off and unplug the cleaner.
2. Remove the dirty water tank from the main unit.
3. Pour out the dirty water and debris into a sink.
4. Rinse the tank thoroughly with clean water.
5. Allow the tank to air dry before reattaching it to the cleaner.

6.2 Cleaning the Dual-Purpose Brush Bar

The brush bar should be cleaned regularly to maintain cleaning efficiency.

• 

  Image description: A hand removing the dual-purpose brush bar from the cleaner, highlighting its removable design for easy maintenance.

1. Turn off and unplug the cleaner.
2. Remove the brush bar cover and then the brush bar.
3. Rinse the brush bar under running water to remove any hair or debris.
4. Ensure the brush bar is completely dry before reinserting it.
5. Reattach the brush bar and its cover securely.

6.3 General Cleaning

• Wipe the exterior of the cleaner with a soft, damp cloth.
• Do not use abrasive cleaners or solvents.
• Store the cleaner in a dry place, preferably on its storage tray.

7. Troubleshooting

If you encounter issues with your Beldray Clean & Dry Cordless Cleaner, refer to the table below for common problems and solutions.

8. Specifications

• Model: BEL0908
• Brand: Beldray
• Voltage: 22.2V
• Battery Type: Lithium-ion
• Operating Time: Up to 30 minutes
• Charge Time: 3-4 hours
• Clean Water Tank Capacity: 550 ml
• Dirty Water Tank Capacity: 280 ml
• Noise Level: 72 dB
• Product Dimensions: 10.63 x 10.24 x 44.88 cm
• Item Weight: 5.72 kg
• Special Features: Removable Dual Tank System, Removable Dual-Purpose Brush Bar, Swivel Floor Head, Dual Speed with Boost Function, Cordless & Rechargeable.

9. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Beldray website: www.beldray.com.

You can also contact customer service via the details provided on the product packaging.

10. Product Video Demonstration

Watch the official product video for a visual guide on the features and operation of the Beldray Clean & Dry Cordless Cleaner.