1. Introduction
This manual provides detailed instructions for the proper use and maintenance of your IRV-R1 Wireless Remote Control. This remote is specifically designed as a replacement for and is compatible with IRV Technology Car Stereo models IRV63, IRV35, and IRV68, which feature three independent audio zones.
Please read this manual thoroughly before using the remote control to ensure optimal performance and longevity of the device.
2. Product Overview
The IRV-R1 remote control offers a convenient way to manage your IRV Technology car stereo system from a distance. It replicates all essential functions of the original remote, providing a seamless user experience.
2.1 Key Features
- Direct replacement for original IRV remotes.
- High-quality, sensitive buttons for comfortable use.
- No programming or pairing required; ready to use out of the box.
- Controls three independent audio zones (Zone 3 functionality).
2.2 Remote Control Layout
Figure 1: Front view of the IRV-R1 Wireless Remote Control, showing all buttons including Power, Speaker Zone selection, Volume controls, Number pad, Navigation buttons, and various function keys.
The remote features a standard layout with clearly labeled buttons for easy operation:
- POWER: Turns the stereo system on or off.
- SPEAKER ZONE (1, 2, 3): Selects the active audio zone.
- Z3 VOL (+/-): Adjusts volume specifically for Zone 3.
- Number Pad (0-9): For direct track selection or input.
- Navigation Buttons (Up, Down, Left, Right, OK): For menu navigation and selection.
- MENU: Accesses the system menu.
- SRC (Source): Changes the audio input source.
- AUD (Audio): Accesses audio settings.
- VOL (+/-): Adjusts master volume.
- AM/FM: Toggles between AM and FM radio bands.
- SETUP: Enters setup mode.
- Playback Controls (Play/Pause, Stop, Skip Forward/Backward): For media playback.
3. Setup
The IRV-R1 remote control is designed for immediate use without complex setup procedures.
3.1 Battery Installation
The remote requires one CR2025 cell battery (not included). Follow these steps to install the battery:
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover open in the direction indicated by the arrow.
- Insert one CR2025 battery with the positive (+) side facing upwards, as indicated inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Figure 2: Back view of the remote control with the battery compartment open.
Figure 3: A CR2025 3V Lithium Battery.
3.2 Initial Use
Once the battery is installed, the remote control is ready for immediate use. No programming or pairing is required. Simply point the remote at your IRV Technology car stereo system and begin operating it.
4. Operating Instructions
The IRV-R1 remote control provides full functionality for your compatible IRV stereo system. Ensure there is a clear line of sight between the remote and the stereo's IR receiver for optimal performance.
4.1 Basic Functions
- Power On/Off: Press the POWER button.
- Volume Adjustment: Use the VOL + or VOL - buttons to increase or decrease the master volume.
- Source Selection: Press the SRC button to cycle through available audio sources (e.g., Radio, USB, Bluetooth, AUX).
- Menu Navigation: Use the directional arrows (Up, Down, Left, Right) to navigate through menus and options. Press OK to confirm a selection.
4.2 Zone Control
For IRV systems with multiple audio zones (e.g., IRV63, IRV35, IRV68), the remote allows independent control:
- Select Speaker Zone: Press SPEAKER ZONE 1, 2, or 3 to activate the desired audio zone. The selected zone will be the primary zone for general volume and source control.
- Adjust Zone 3 Volume: Use the Z3 VOL + or Z3 VOL - buttons to adjust the volume specifically for Zone 3, independent of other zones.
5. Maintenance
Proper care and maintenance will extend the life of your remote control.
5.1 Battery Replacement
Replace the CR2025 battery when the remote's response becomes sluggish or it stops functioning. Refer to Section 3.1 for battery installation instructions.
5.2 Cleaning
To clean the remote control:
- Wipe the surface with a soft, dry cloth.
- For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive materials.
- Ensure no liquid enters the remote's interior.
5.3 Storage
When not in use for extended periods, store the remote control in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for several months, it is advisable to remove the battery to prevent leakage.
6. Troubleshooting
If you experience issues with your IRV-R1 remote control, try the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding | Dead or incorrectly installed battery. | Replace the CR2025 battery, ensuring correct polarity (+ side up). |
| Remote not responding | No clear line of sight to the stereo's IR receiver. | Ensure no obstructions are between the remote and the stereo. Point the remote directly at the stereo. |
| Remote not responding | Stereo system is off or in standby mode. | Ensure the stereo system is powered on. |
| Buttons are unresponsive or sticky | Dirt or debris under the buttons. | Clean the remote control as described in Section 5.2. |
7. Specifications
- Model: IRV-R1
- Compatible Devices: IRV Technology Car Stereo IRV63, IRV35, IRV68
- Connectivity Technology: Infrared (IR)
- Battery Type: 1 x CR2025 Cell Battery (3V Lithium)
- Product Dimensions: Approximately 5 x 2 x 0.5 inches (12.7 x 5.08 x 1.27 cm)
- Item Weight: Approximately 1.76 ounces (50 grams)
- Special Feature: Ergonomic design
8. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your original IRV Technology car stereo system or contact the manufacturer directly. The IRV-R1 remote control is designed as a direct replacement and typically carries a standard replacement warranty from the seller.
For further assistance, please contact your product retailer or the manufacturer, ATP Products Inc.
