Hurom HP Slow Juicer Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Hurom HP Slow Juicer. Please read all instructions carefully before using the appliance for the first time and retain this manual for future reference.

2. Important Safety Information

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using electrical appliances.

• Read all instructions before use.
• Do not immerse the motor base in water or other liquids.
• Keep hands and utensils out of the feeding chute during operation to prevent injury.
• Always unplug the juicer from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Ensure all parts are correctly assembled before operating the juicer.
• Do not operate the juicer if the cord or plug is damaged, or if the appliance malfunctions or has been dropped or damaged in any manner.
• This appliance is for household use only.

3. Product Components

Familiarize yourself with the various parts of your Hurom HP Slow Juicer.

Image 3.1: Exploded view of Hurom HP Slow Juicer components, including the manual, cleaning brushes, twin wing auger, juice and pulp containers, pusher, spinning brush, juicer body, chamber, fine strainer, and hopper with lid.

• Juicer Body: Contains the motor and control buttons.
• Chamber: The main housing for juicing components.
• Hopper & Lid: Where ingredients are fed into the juicer.
• Pusher: Used to guide ingredients into the feeding chute.
• Twin Wing Auger: The slow-squeezing mechanism that extracts juice.
• Fine Strainer: Filters pulp from the juice.
• Spinning Brush: Rotates to clean the strainer during operation.
• Juice Container: Collects the extracted juice.
• Pulp Container: Collects the separated pulp.
• Cleaning Brushes: For thorough cleaning of components.

4. Setup and Assembly

Follow these steps to correctly assemble your Hurom HP Slow Juicer before first use.

1. Place the Chamber: Position the chamber onto the juicer body, ensuring it is securely seated and aligned.
2. Insert the Spinning Brush: Place the spinning brush into the chamber.
3. Insert the Fine Strainer: Place the fine strainer inside the spinning brush.
4. Insert the Auger: Insert the twin wing auger into the center of the strainer.
5. Attach the Hopper & Lid: Place the hopper onto the chamber and rotate it clockwise until it locks into place. Ensure the lid is securely fastened.
6. Position Containers: Place the juice container under the juice outlet and the pulp container under the pulp outlet.

Image 4.1: Fully assembled Hurom HP Slow Juicer, ready for operation.

5. Operating Instructions

Learn how to effectively use your Hurom HP Slow Juicer to extract juice from various ingredients.

5.1 Ingredient Preparation

• Wash all fruits and vegetables thoroughly.
• Remove hard pits, seeds, and thick skins (e.g., pineapple, melon, citrus).
• Cut ingredients into pieces that fit easily into the feeding chute. For fibrous vegetables like celery or kale, cut them into short lengths (approx. 1-2 inches) to prevent clogging.

5.2 Juicing Process

1. Ensure the juicer is properly assembled and plugged into a grounded electrical outlet.
2. Place the juice and pulp containers in their designated positions.
3. Turn the power switch to the 'ON' position. The motor will start.
4. Slowly feed prepared ingredients into the feeding chute. Use the pusher only if necessary to gently guide ingredients down. Do not force ingredients.
5. The juicer will extract juice, which will flow into the juice container, while the pulp will be expelled into the pulp container.
6. For continuous juicing, ensure the juice cap is open. To mix juices or hold juice in the chamber, close the juice cap.
7. Once juicing is complete, turn the power switch to the 'OFF' position and unplug the appliance.

Image 5.1: The Hurom HP Slow Juicer actively dispensing fresh juice into a glass.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and longevity of your Hurom HP Slow Juicer. All removable parts are dishwasher safe.

6.1 Disassembly for Cleaning

1. Ensure the juicer is turned 'OFF' and unplugged from the power outlet.
2. Remove the juice and pulp containers.
3. Rotate the hopper and lid counter-clockwise to unlock and remove it.
4. Lift out the twin wing auger, then the fine strainer, and finally the spinning brush.
5. Remove the chamber from the motor base.

6.2 Cleaning Procedure

• Rinse all disassembled parts under running water immediately after use to prevent pulp from drying.
• Use the provided cleaning brushes to remove any stubborn pulp from the strainer and other components.
• Wash all removable parts with warm, soapy water. All removable parts are dishwasher safe.
• Wipe the motor base with a damp cloth. Never immerse the motor base in water.
• Allow all parts to dry completely before reassembling or storing.

7. Troubleshooting

Refer to this section for solutions to common issues you might encounter with your Hurom HP Slow Juicer.

8. Product Specifications

Detailed technical specifications for the Hurom HP Slow Juicer.

9. Warranty and Support

For warranty information and customer support, please refer to the official Hurom website or contact Hurom America directly.

• Manufacturer: Hurom
• Return Policy: 90-day refund/replacement (as per Amazon Renewed policy at time of purchase).
• For specific warranty details, please visit the official Hurom website.
• For customer service inquiries, please contact Hurom America support.