Qinlorgo B07VPQN29D
Qinlorgo Digital LCD Smart Scale User Manual
Model: B07VPQN29D
Introduction
Thank you for choosing the Qinlorgo Digital LCD Smart Scale. This scale is designed to provide fast and accurate body weight measurements with a high-sensitivity sensor and a clear digital LCD display. It supports multiple unit conversions and features a durable tempered glass design. Please read this manual carefully before use to ensure proper operation and maintenance.
Image: Top view of the Qinlorgo Digital LCD Smart Scale, showing its gold and white circular design with a central display.
Safety Information
- Do not use the scale on wet or slippery surfaces. Ensure the scale is placed on a firm, flat surface.
- Do not jump on the scale or use it for purposes other than weighing.
- Keep the scale away from water and extreme temperatures.
- Avoid dropping the scale, as it may damage the tempered glass surface or internal components.
- This scale is designed for personal use and is not intended for commercial or medical purposes.
- Keep batteries out of reach of children.
Product Overview
The Qinlorgo Digital LCD Smart Scale features a sleek design with key components for accurate measurement.
- Tempered Glass Platform: The main weighing surface, designed for durability and safety.
- LCD Display: Digital screen for clear weight readings, visible day and night.
- High-Sensitivity Sensors: Located beneath the platform for precise measurements.
- Unit Conversion Button: A small button, typically near the battery compartment, used to switch between measurement units (Kilograms, Pounds, Catty).
- Battery Compartment: Located on the underside of the scale.
Image: Close-up view of the scale's LCD display, showing a clear digital reading of "15.00" with a unit indicator, highlighting its readability.
Image: View of the battery compartment on the underside of the scale, showing slots for AAA batteries.
Image: Close-up of the small, circular unit conversion button located on the underside of the scale, often mistaken for a cover.
Setup
1. Battery Installation
- Turn the scale over to access the battery compartment on the underside.
- Open the battery compartment cover.
- Insert the required AAA batteries (not included) according to the polarity indicators (+/-).
- Close the battery compartment cover securely.
2. Initial Placement
- Place the scale on a hard, flat, and stable surface. Avoid carpets or uneven flooring, as this can affect accuracy.
3. Unit Conversion
The scale supports Kilograms (kg), Pounds (lb), and Catty. To change the measurement unit:
- Locate the small button on the underside of the scale, often near the battery compartment. This button may appear as a small tab or a raised circle.
- Press this button repeatedly to cycle through the available units (kg, lb, catty) until your desired unit is displayed on the LCD screen.
Operating Instructions
Weighing Procedure
- Ensure the scale is on a flat, hard surface.
- Gently step onto the center of the scale with bare feet. The scale will automatically turn on.
- Stand still and balanced on the scale. The LCD display will show your weight.
- Once the reading stabilizes, you can step off. The scale will automatically turn off after a few seconds of inactivity.
Image: A person standing on the Qinlorgo Digital LCD Smart Scale, demonstrating the proper way to use it for weighing.
Maintenance
- Cleaning: Wipe the scale surface with a soft, damp cloth. Do not use abrasive cleaners or immerse the scale in water.
- Storage: Store the scale in a dry place at room temperature. Avoid direct sunlight or extreme humidity.
- Battery Replacement: If the display shows "Lo" or becomes dim, replace the batteries. Ensure correct polarity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scale does not turn on. | Batteries are dead or incorrectly installed. | Check battery polarity and replace batteries if necessary. Ensure all battery contacts are clean and functional. |
| Inaccurate readings. | Scale is on an uneven surface; scale needs calibration; weight exceeds capacity. | Place scale on a hard, flat surface. Step off and on again to re-calibrate. Ensure weight is within 0.2-180kg range. |
| Display shows "Lo". | Low battery power. | Replace batteries. |
| Cannot change units. | Incorrect button pressed or button not fully engaged. | Ensure you are pressing the correct unit conversion button firmly on the underside of the scale. |
Specifications
- Brand: Qinlorgo
- Model: B07VPQN29D
- Weighing Range: 0.2 - 180 kg (0.44 - 396 lbs)
- Units: Kilograms (kg), Pounds (lb), Catty
- Display Type: Digital LCD
- Material: High-strength tempered glass
- Power Source: AAA Batteries (not included)
- Product Dimensions: 0.39 x 0.39 x 0.39 inches (Note: These dimensions may refer to packaging or internal components, not the full scale size.)
- Color: Gold
- Special Features: High sensitivity sensors, wide scale surface for balance, automatic on/off.
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Qinlorgo website. Please retain your proof of purchase for any warranty claims.
For common issues, please refer to the Troubleshooting section of this manual.