Introduction
This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your Tamiya 17011 Mini 4WD Nissan Terrano '93 Paris Dakar Team Nok Jatco 1/32 model kit. Please read all instructions carefully before beginning assembly or operation to ensure proper function and longevity of your model.
Safety Information
- Keep small parts out of reach of young children to prevent choking hazards.
- Use appropriate tools as specified in the assembly instructions.
- Dispose of batteries responsibly according to local regulations.
- Avoid operating the model in wet conditions or near water.
Setup and Assembly
The Tamiya 17011 Mini 4WD Nissan Terrano '93 Paris Dakar Team Nok Jatco is a 1/32 scale model kit that requires assembly. Detailed assembly instructions are included within the product packaging. Please follow these instructions step-by-step for correct construction.
Key Assembly Points:
- Ensure all parts are correctly identified before assembly.
- Pay close attention to gear installation to ensure smooth operation.
- Batteries are required for operation but are not included in the kit. You will need to supply two AA alkaline batteries.
Operating Instructions
Once assembled and batteries are installed, your Mini 4WD model is ready for operation.
- Install Batteries: Open the battery compartment, typically located on the underside of the chassis. Insert two AA alkaline batteries, ensuring correct polarity.
- Power On: Locate the power switch. Please note that on this model, the body may need to be removed to access the power switch for turning the car on and off.
- Placement: Place the self-propelled model on a flat, smooth surface or a Mini 4WD race track.
- Operation: The model will move forward once powered on. It is designed for racing on dedicated Mini 4WD tracks or for display.
Maintenance
Regular maintenance will help ensure the longevity and performance of your Mini 4WD model.
- Cleaning: Periodically clean the chassis, wheels, and body with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals.
- Gear Inspection: Regularly inspect the gears for wear or damage. If gears show signs of poor mesh or stripping, replace them promptly to maintain optimal performance.
- Battery Care: Remove batteries if the model will not be used for an extended period to prevent leakage. Replace old batteries with new ones when performance degrades.
- Wheel and Axle Check: Ensure wheels spin freely and axles are not bent.
Troubleshooting
If your Mini 4WD model is not performing as expected, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Model does not move | Dead or incorrectly installed batteries; loose motor connection; power switch off. | Replace batteries, check polarity; ensure motor wires are secure; turn power switch on. |
| Model moves slowly or inconsistently | Weak batteries; dirty gears; worn motor; excessive friction. | Replace batteries; clean gears and lubricate if necessary; inspect motor for wear; check for obstructions. |
| Grinding noise or gears stripping | Improperly installed gears; worn or damaged gears. | Re-install gears correctly, ensuring proper mesh; replace any damaged gears. |
Specifications
Detailed specifications for the Tamiya 17011 Mini 4WD Nissan Terrano '93 Paris Dakar Team Nok Jatco model:
- Brand Name: TAMIYA
- Model Name: NISSAN TERRANO '93 PARIS-DAKAR
- Model Number: 17011-000
- Scale: 1:32 Scale
- Item Dimensions (L x W x H): 5.59 x 4.92 x 3.5 inches
- Item Weight: 0.31 Kilograms
- Power Source: Battery Powered
- Battery Description: Alkaline (AA batteries required, not included)
- Assembly Required: Yes
- Number of Items: 1
- Operation Mode: Self-Propelled
Warranty and Support
For warranty information, technical support, or inquiries regarding replacement parts, please refer to the documentation included with your product or contact Tamiya directly through their official website or customer service channels. Specific warranty details are not provided in this manual.