Product Overview
The PURE CLEAN Robot Vacuum Wet Mop Accessory Kit (Model: PRTPUCRC4558) is designed to enhance the cleaning capabilities of your Pyle PUCRC455 Digital Smart Robot Cleaning Vacuum. This kit allows your robot vacuum to perform wet mopping, providing a more comprehensive cleaning solution for hard floors.
Key features include:
- Comprehensive Cleaning Kit: Includes a water tank and three wet mop pads for thorough hard floor cleaning.
- Seamless Compatibility: Designed to work perfectly with your Pyle PureClean PUCRC455 robot vacuum.
- Efficient Water Capacity: 350mL tank ensures adequate water supply for multiple cleaning cycles.
- Lightweight and Portable: Weighing only 14.4 ounces, it's easy to handle and store.
Package Contents
Upon opening the package, verify that all components are present:
- 1 x Water Tank
- 3 x Wet Mop Pads
Image: The accessory kit showing the water tank and one of the wet mop pads separately.
Setup Instructions
Prepare the Water Tank:
Locate the water tank from the accessory kit. Open the water inlet cap on the tank.
Image: A hand pouring water into the water tank, illustrating the 350ml capacity.
Carefully fill the tank with clean water. The tank has a capacity of 350mL. Do not overfill. Close the water inlet cap securely to prevent leaks.
Attach the Wet Mop Pad:
Take one of the wet mop pads. Align the mop pad with the hook-and-loop fasteners on the bottom of the water tank. Press firmly to ensure the pad is securely attached to the tank.
Image: The water tank with the blue wet mop pad already attached, ready for installation.
Install on Robot Vacuum:
Turn your Pyle PUCRC455 robot vacuum upside down. Locate the designated slot for the wet mop accessory. Slide the filled water tank with the attached mop pad into this slot until it clicks securely into place. Ensure it is flush with the vacuum's body.
Image: The underside of the Pyle PUCRC455 robot vacuum with the wet mop accessory kit installed, showing its compatibility.
Operating Instructions
Once the Wet Mop Accessory Kit is installed, your Pyle PUCRC455 robot vacuum is ready for wet mopping. The vacuum will automatically dispense water onto the mop pad as it cleans, providing a damp wipe for hard floor surfaces.
- Ensure the robot vacuum's dustbin is emptied before starting a mopping cycle to prevent debris from interfering with the mopping process.
- For optimal results, use the wet mopping function on hard floor surfaces such as tile, laminate, or sealed hardwood. Avoid using on carpets or rugs.
- Monitor the water level in the tank during extended cleaning sessions. Refill as needed.
- After each mopping cycle, remove the accessory kit and proceed to the maintenance steps.
Maintenance
Regular maintenance of your Wet Mop Accessory Kit ensures optimal performance and extends its lifespan.
Cleaning the Wet Mop Pads:
After each use, detach the wet mop pad from the water tank. Hand wash the mop pad with mild detergent and warm water, or machine wash on a gentle cycle. Allow the mop pad to air dry completely before reattaching or storing. Replace mop pads when they show signs of wear or reduced cleaning effectiveness.
Cleaning the Water Tank:
Empty any remaining water from the tank after each use. Rinse the water tank thoroughly with clean water. For deeper cleaning, use a small brush to clean the inside of the tank and the water dispensing nozzles. Allow the tank to air dry completely before reassembling or storing to prevent mold or mildew buildup.
Storage:
Store the accessory kit in a cool, dry place away from direct sunlight when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water not dispensing from tank. |
|
|
| Mop pad not cleaning effectively. |
|
|
| Accessory kit detaches during operation. |
|
|
Specifications
- Model: PRTPUCRC4558
- Compatibility: Pyle PUCRC455 Digital Smart Robot Cleaning Vacuum
- Water Capacity: 350 mL
- Included Components: Water Tank, 3 Wet Mop Pads
- Item Weight: 14.4 ounces (0.88 lbs)
- Dimensions (Package): 12.2 x 6.3 x 2.8 inches
Warranty and Support
For information regarding product warranty, please refer to the documentation provided with your original Pyle PUCRC455 robot vacuum or contact PURE CLEAN customer support directly.
If you require technical assistance or have questions about this accessory kit, please visit the official PURE CLEAN website or contact their customer service department. Contact details are typically available on the manufacturer's website or in the original product packaging.
